Publications related to Limiting Amplifiers for Next-Generation Multi-Channel Optical I/O Interfaces in SoCs

Related publications (30)

Modeling and optimization of PCB coils for inductive power transfer systems

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Mohammad Javad Karimi

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

Kyojin Choo

This work presents an acoustic analog front-end based on a delta sigma-modulated sample and average common-mode feedback technique. The proposed feedback offers a process and temperature stable high pass (HP) frequency corner, unity dc feedback gain, and a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Time-Varying Components for Enhancing Wireless Transfer of Power and Information

Romain Christophe Rémy Fleury, Mohammad Sajjad Mirmoosa

Temporal modulation of components of electromagnetic systems provides an exceptional opportunity to engineer the response of those systems in a desired fashion, both in the time and frequency domains. For engineering time-modulated systems, one needs to th ...

American Physical Society (APS)2021

Ultra-High-Voltage (7-kV) Bidirectional Flyback Converter Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Morgan Almanza, Raphaël Johannes Charles Mottet

Dielectric elastomer actuators (DEAs) have extremely advantageous characteristics such as lightness, compactness, flexibility, and large displacements. However, in order to operate, they can require voltages in the order of several thousands of volts. Thus ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Analysis of Large-Signal Output Capacitance of Transistors using Sawyer–Tower Circuit

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Armin Jafari, Palliyage Srilak Nirmana Perera, Georgios Kampitsis

A detailed analysis on the Sawyer–Tower method used in the measurement of large-signal output capacitance (Co) of power transistors is presented, followed by important design recommendations to obtain accurate results. Key factors affecting the proper impl ...

2020

Miniaturised Wireless Power Transfer Systems for Neurostimulation: A Review

Sandro Carrara, Diego Ghezzi, Danilo Demarchi, Gian Luca Barbruni

In neurostimulation, wireless power transfer is an efficient technology to overcome several limitations affecting medical devices currently used in clinical practice. Several methods were developed over the years for wireless power transfer. In this review ...

2020

Active Phase-Conjugating Rotman Lens With Reflection Amplifiers for Backscattering Enhancement

Pouyan Keshavarzian

Active retrodirective antenna arrays find a variety of use in applications involving wireless communication and sensing systems. This article presents a novel active version of the phase-conjugating Rotman lens with negative conductance amplifiers for appl ...

Institute of Electrical and Electronics Engineers2020

Adaptive Learning-Based Compressive Sampling for Low-power Wireless Implants

Yusuf Leblebici, Volkan Cevher, Catherine Dehollain, Mahsa Shoaran, Luca Baldassarre, Franco Maloberti, Cosimo Aprile, Kerim Türe, Gürkan Yilmaz

Implantable systems are nowadays being used to interface the human brain with external devices, in order to understand and potentially treat neurological disorders. The most predominant design constraints are the system’s area and power. In this paper, we ...

2018

Broadband Low-Frequency Electroacoustic Absorbers Through Hybrid Sensor-/Shunt-Based Impedance Control

Hervé Lissek, Sami Driss Karkar, Etienne Thierry Jean-Luc Rivet

This paper proposes a hybrid impedance control architecture for an electroacoustic absorber, that combines an improved microphone-based feedforward control with a currentdriven electrodynamic loudspeaker system. Feedforward control architecture enables sta ...

Institute of Electrical and Electronics Engineers2017

Medium Frequency Transformer Leakage Inductance Modeling and Experimental Verification

Drazen Dujic, Marko Mogorovic

This paper provides detailed analytical modelling and finite elements method (FEM) analysis of the medium frequency transformer (MFT) leakage inductance, as one of the key design factors governing the operation of galvanically isolated power electronics co ...

2017

Electronics Emulation for Real-Time Fault Location in Power Systems

François Pierre Gaugaz

This research presents a high-speed hardware platform dedicated to emulate electrical power networks for the fault location. The solution implements an algorithm based on the Electromagnetic Time-Reversal (EMTR) principle, which allows locating faults in v ...

EPFL2017

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Farhad Rachidi-Haeri, Marcos Rubinstein, Nicolas Mora Parra

This paper reports the results of two experimental campaigns aimed at studying the high-frequency response of a raceway containing low voltage power, telephone, and Ethernet cables, to external electromagnetic field illumination. The raceway was tested aga ...

Institute of Electrical and Electronics Engineers2016

A remotely powered fully integrated low power class-E power amplifier for implantable sensor systems

Catherine Dehollain, Enver Gürhan Kilinç, Kerim Türe

This paper presents a fully integrated low power class-E power amplifier and its integration to remotely powered sensor system. The on-chip 1.2 GHz power amplifier is implemented in 0.18 A mu m CMOS process with 0.2 V supply. The implantable system is powe ...

Springer2016

Implementation Guidelines for a Real-Time Fault Location System in Electrical Power Networks

Maher Kayal, François Krummenacher, François Pierre Gaugaz

This paper presents constraints involved in the microelectronic implementation of a transmission line model based on transconductor-capacitor (gm-C) topologies. The presented line model, based on the discretization of a transmission line into a finite numb ...

Ieee2016

OTA-C based high-speed analog processing for real-time fault location in electrical power networks

Maher Kayal, François Krummenacher, François Pierre Gaugaz

This paper explores the potential and limitations of analog integrated circuit techniques for the simulation of low-loss or lossless 1D or 2D transmission mediums. In this approach, a transmission line is mapped into a ladder consisting of N identical LC e ...

Springer Verlag2016

Phase and frequency self-configurable efficient low voltage harvester for zero power wearable devices

Pierre-André Farine, Alexis Boegli, Milad Ataei Ashtiani

This paper describes a converter which configures itself to increase power transfer and decrease losses. The system controls its three timing variables by three loops in a stable manner. A time domain state-space averaging model is used to design the syste ...

Ieee2016