Ultraviolet Filtration Passivator for Stable High-Efficiency Perovskite Solar Cells

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Ultraviolet-induced degradation (UV-ID) of various PV cell types was analyzed under optical UV filters with different cutoff wavelengths. Cell types studied included interdigitated back contact (IBC), passivated emitter and rear totally diffused (PERT), an ...

The J–V bump and hysteresis in perovskite solar cells are studied combining measurement and simulation, linking them to spatial collection efficiency changes from ionic charge accumulation, as visualised in external quantum efficiency (EQE) spectra. ...

Electron-withdrawing molecules (EWMs) have exhibited remarkable efficacy in boosting the performance of perovskite solar cells (PSCs). However, the underneath mechanisms governing their positive attributes remain inadequately understood. Herein, we conduct ...

A simple diphenylamine-based hole transporting material V1553 was synthesized and incorporated into a perovskite solar cell, which showed remarkable power conversion efficiency close to 23%. The investigated HTM was synthesized via one-step catalyst-free c ...

Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improveme ...

Tin–lead (Sn–Pb) mixed perovskite solar cells (PSCs) offer the potential for higher power conversion efficiency (PCE) than their pure lead counterparts. However, the lack of a well-defined Sn/Pb compositional profile results in disordered internal electric ...

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Surface passivation has been widely employed to suppress non-radiative charge recombination and prevent interfacial charge accumulation in perovskite photovoltaics. In this report, carbazole modified with ammonium iodide connected via alkyl chains of diffe ...

Host-guest complexation offers a promising approach for mitigating surface defects in perovskite solar cells (PSCs). Crown ethers are the most widely used macrocyclic hosts for complexing perovskite surfaces, yet their supramolecular interactions and funct ...

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate du ...

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Full-area passivating contacts based on SiOx/poly-Si stacks are key for the new generation of industrial silicon solar cells substituting the passivated emitter and rear cell (PERC) technology. Demonstrating a potential efficiency increase of 1 to 2% compa ...

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

Suppression of energy disorders in the vertical direction of a photovoltaic device, along which charge carriers are forced to travel, has been extensively studied to reduce unproductive charge recombination and thus achieve high-efficiency perovskite solar ...

Perovskite solar cells (PSCs) offer an attractive solution to increase the efficiency of PV panels via perovskite/silicon tandems thanks to their potential cost-effectiveness and high efficiency. In inverted PSC architecture (p-i-n), commonly used hole con ...

Utilization of small molecules as passivation materials for perovskite solar cells (PSCs) has gained significant attention recently, with hundreds of small molecules demonstrating passivation effects. In this study, a high-accuracy machine learning model i ...

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Ultraviolet Filtration Passivator for Stable High-Efficiency Perovskite Solar Cells

Chat with Graph Search

Enhancing lifetime, forecasting, and economic benefits of photovoltaic technologies undergoing UV-induced degradation with optical filtering

Visualising ionic screening in perovskite solar cells: a bumpy ride along the J–V curve

Unraveling the Role of Electron-Withdrawing Molecules for Highly Efficient and Stable Perovskite Photovoltaics

Facile and Low-Cost Design Alternative of Spiro-OMeTAD as p-Type Semiconductor for Efficient Perovskite Solar Cells

All-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites

Buried SnI2 Induces Gradient Heterojunctions in Sn–Pb Perovskite Solar Cells

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Carbazole Treated Waterproof Perovskite Films with Improved Solar Cell Performance

Tailored Supramolecular Interactions in Host–Guest Complexation for Efficient and Stable Perovskite Solar Cells and Modules

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Development and characterization of N2O-plasma oxide layers for high-temperature p-type passivating contacts in silicon solar cells

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Micro-homogeneity of lateral energy landscapes governs the performance in perovskite solar cells

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

Machine Learning for Screening Small Molecules as Passivation Materials for Enhanced Perovskite Solar Cells

Stress tolerance of lightweight glass-free PV modules for vehicle integration