Lucie NavratilovaExpertise
Scanning electron microscopy SEM Dual beam microscope SEM/FIB EDX analysis
Teaching & PhD Courses 3D Electron Microscopy and FIB-Nanotomography MSE-704 The principles of 3D surface (SEM) reconstruction and its limitations will be explained. 3D volume reconstruction and tomography methods by electron microscopy (SEM/FIB and TEM) will be explained and compared with x-ray tomography. Scanning electron microscopy techniques (a) MSE-636(a) This intensive course is inten
Barbora Bártová2015 scientist in Environmental microbiology laboratory EML and Interdisciplinary centre for electron microscopy CIME - EPFL
2012-2015 senior fellow in Material science, Engineering department CERN
2008-2011 postdoctoral researcher in Interdisciplinary centre for electron microscopy CIME EPFL
2006-2007 postdoctoral researcher within the Marie Curie Research Training Network Multimat, University of Antwerp
Harald BruneOriginaire de Münich en Allemagne, né en 1961, Harald Brune obtient son diplôme en physique de l'Université Ludwig Maximilians en 1989. Après une thèse en chimie physique à l'Institut Fritz-Haber de la Société Max-Planck à Berlin il obtient son titre de docteur ès sciences en 1992. Dès cela, il rejoint le groupe du Prof. K. Kern à l'Institut de physique expérimentale à l'EPFL. En 1995 il est chercheur invité à Copenhague travaillant en modélisation chez le Prof. J. Nørskov. De retour à l'EPFL, il se voit décerné le prix Latsis EPFL 1996 pour ses études par microscopie à effet tunnel de processus atomiques déterminants la croissance cristalline de couches minces. En 1998 il obtient son habilitation (venia legendi) en Physique et est nommé Maître d'enseignement et de recherche (MER) en nanophysique à l'EPFL. La même année il recoit une offre de Professeur Ordinaire (C4) de l'Université Philipps de Marburg. Début 1999 il réfuse cette offre et accepte un poste de Professeur Extraordinaire à l'EPFL et s'installe au sein de l'Institut de la Physique des Nanostructures. Il est nommé Professeur Ordinaire en 2005. Sa recherche porte sur les propriétés physiques (en particulier le magnétisme et la structure électronique) de nouvelles formes de la matière condensée comme des nanostructures et des couches ultra-minces. Il s'intéresse également à la catalyse hétérogène sur des systèmes inspirés dans leur composition et taille par celle des sites actives dans les enzymes en biologie. Il enseigne la Physique Générale pour ingénieurs, la Physique des matériaux solides pour physiciens, les méthodes expérimentales pour physiciens, ainsi que la Physique des surfaces, interfaces et nanostrcutures à l'école doctorale.
Aleksandra RadenovicFrom April 2021 Full Professor 2015 -2021 Associate Professor2008-2015 Tenure-Track Assistant Professor2004-2007 Postdoc at the University of California, Berkeley in the group of Prof.Liphardt2003 PhD student of Prof. Dietler in Laboratory of Physics of Living Matter, University of Lausanne 1999 Diploma thesis on the subject of the Raman spectroscopy of beta carotene1994-1999 Physics department at the University of Zagreb1994 baccalaureate, Classical gymnasium
Philippe BuffatBorn in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Elise Rose ErayTeaching & PhD Courses Practical - Antanasijevic Lab BIO-614 The students will learn: 1) how to handle viral protein antigens and antibody samples 2) how to assemble and purify immune complexes using liquid chromatography 3) how to image them on an electron microscope
Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
Ivo UtkeTeaching & PhD PhD Students Camilla Minzoni Past EPFL PhD Students as codirector Vinzenz Friedli, Laurent Bernau, Luisa Berger Courses Nanofabrication with focused electron and ion beams MSE-619 Nanofabrication with focused charged particle beams (SEM, FIB) and their applications such as lithography, gas assisted deposition / etching, and milling are discussed and the limitations of these processes are developed based on the acquired understanding of the interactions.
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Lorenz HerrmannTeaching & PhD Courses Advanced Microscopy for Materials MSE-677 This course provides an overview of advanced materials characterization techniques, focusing on modern Scanning Electron Microscopy (SEM) combined with Focused Ion Beam (FIB) systems (dual-beam), as well as Transmission Electron Microscopy (TEM) and Atom Probe Tomography (APT).
Xavier MaederTeaching & PhD PhD Students Samuel Felix Bojarski, Kamila Elzbieta Hamulka, Philipp Konrad Clewie Kroeker Past EPFL PhD Students as codirector Nicolò Maria Della Ventura Courses Advanced Microscopy for Materials MSE-677 This course provides an overview of advanced materials characterization techniques, focusing on modern Scanning Electron Microscopy (SEM) combined with Focused Ion Beam (FIB) systems (dual-beam), as well as Transmission Electron Microscopy (TEM) and Atom Probe Tomography (A
Henning Paul-Julius StahlbergMission
We use high-resolution cryo-electron microscopy to study neurodegeneration and other protein systems. We also develop novel imaging technology in the areas of electron microscopy hardware and applications, sample preparation, data collection schemes, and data analysis software systems. The Stahlberg group is supported by the University of Lausanne, Faculty of Medicine and Biology, and by the EPFL, Faculty of Basic Sciences, Physics Institute. The LBEM is a research laboratory of both UNIL and EPFL.
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Marina PivettaTeaching & PhD PhD Students Serni Toda Cosi, Simon Vejs Kjeldgaard-Jensen Past EPFL PhD Students as codirector Giulia Pacchioni, Jean-Guillaume De Groot, Sébastien Reynaud Courses Frontiers in nanosciences PHYS-407 The course covers relevant experimental and theoretical concepts in nanoscale science, from fundamental aspects like quantum tunneling and quantum size effects, to hot topics like quantum transport and nanoscale magnetism. Solid state physics PHYS-337 This lectur
Jean-Philippe HoggeTeaching & PhD PhD Students Constant Philippe Panisset, Pierrick Paul Louis Giroud-Garampon Past EPFL PhD Students Sudheer Kumar Jawla, Guillaume Michel Le Bars Past EPFL PhD Students as codirector Falk Braunmüller Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined th
Jonathan SchneiderTeaching & PhD Courses Integrative structural biology for Life sciences BIO-643 Hands-on course in Biomolecular Integrative Structural Biology by SV experts in the field of X-ray crystallography, cryo-Electron Microscopy, Bio-NMR and protein modeling tools. No previous knowledge in Structural Biology or Bioinformatics is required.
Anna-Sophia KrebsTeaching & PhD Courses Integrative structural biology for Life sciences BIO-643 Hands-on course in Biomolecular Integrative Structural Biology by SV experts in the field of X-ray crystallography, cryo-Electron Microscopy, Bio-NMR and protein modeling tools. No previous knowledge in Structural Biology or Bioinformatics is required.
Thomas La GrangeExpertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Microscopy, Electron Energy Loss Spectroscopy, Energy Dispersive Spectroscopy, Materials Science, High-speed deformation, Dislocation Dynamics, Skyrmionics, Martensitic Phase Transformation Theory, Solidification
Expertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Micro
Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
