Publications related to Effect of spilling from adjacent orifices on the velocity field and pressures in front of needle stop-logs

Related publications (27)

Vapor compression and energy dissipation in a collapsing laser-induced bubble

Mohamed Farhat, Danail Obreschkow, Davide Bernardo Preso, Armand Baptiste Sieber

The composition of the gaseous phase of cavitation bubbles and its role on the collapse remains to date poorly understood. In this work, experiments of single cavitation bubbles in aqueous ammonia serve as a novel approach to investigate the effect of the ...

Aip Publishing2024

Unraveling cartilage degeneration through synergistic effects of hydrostatic pressure and biomimetic temperature increase

Dominique Pioletti, Peyman Karami, Naser Nasrollahzadeh Mamaghani, Yanheng Guo, Theofanis Stampoultzis, Vijay Kumar Rana

Cartilage degeneration, typically viewed as an irreversible, vicious cycle, sees a significant reduction in two essential biophysical cues: the well-established hydrostatic pressure (HP) and the recently discovered transient temperature increase. Our study ...

Cell Press2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Fiber pumps for wearable fluidic systems

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

Incorporating pressurized fluidic circuits into textiles can enable muscular support, thermoregulation, and haptic feedback in a convenient wearable form factor. However, conventional rigid pumps, with their associated noise and vibration, are unsuitable f ...

American Association for the Advancement of Science2023

Research data supporting 'Fiber pumps for wearable fluidic systems'

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

The dataset supporting 'Fiber pumps for wearable fluidic systems', published in Science in March 2023. In this work, we present a fluidic pump in the form of a flexible and stretchable tube. These tubes - or 'fiber pumps' - can generate significant fluidic ...

2023

Improving the Accuracy of Fracture Toughness Measurement in Burst Experiments

Guanyi Lu

Experimental studies suggest that the fracture toughness of rocks increases with the confining pressure. Among many methods to quantify this dependency, a so-called burst experiment (Abou-Sayed, 1978) may be the most widely applied in practice. Its thick w ...

SPRINGER WIEN2022

Overflow pressure characterization in lined plunge pools for slab sizing

Giovanni De Cesare, Pedro Filipe De Almeida Manso

This study presents an experimental work on dynamic pressures at the bottom of a lined plunge pool that receives overflow rectangular impinging jets and aims at improving the design criteria for pool slabs. The experiments were conducted in a fairly large ...

International Association for Hydro-Environment Engineering and Research (IAHR)2022

Bottom-Pressure Development Due to an Abrupt Slope Reduction at Stepped Spillways

Anton Schleiss, Michael Pfister, José Pedro Gamito de Saldanha Calado Matos, Mohammad Javad Ostad Mirza

Fluctuating bottom-pressures on stepped chutes are relevant for the spillway design. An abrupt slope reduction causes a local alteration of the bottom-pressure development. Little information is available regarding the air–water flow properties near an abr ...

2022

Temperature- and pressure-dependence of the hydrogen bond network in plastic ice VII

Livia Eleonora Bove Kado, Umbertoluca Ranieri, Maria Rescigno

We model, via classical molecular dynamics simulations, the plastic phase of ice VII across a wide range of the phase diagram of interest for planetary investigations. Although structural and dynamical properties of plastic ice VII are mostly independent o ...

AIP Publishing2022

In flow acoustic characterisation of a 2D active liner with local and non local strategies

Hervé Lissek, Maxime Volery

The design and the grazing flow aeroacoustical characterization of a 2D active liner based on an array of electroacoustic absorbers are presented in this paper. The strategy stands on a pressure-based, current-driven digital architecture for impedance cont ...

2022

Plunging Circular Jets: Experimental Characterization of Dynamic Pressures Near the Stagnation Zone

Gregoire Aurelien Marie Jamet, Giovanni De Cesare, Pedro Filipe De Almeida Manso

Spillways are a requirement for dams’ safety, mainly preventing overtopping during floods. A common spillway solution involves plunging jets, which dissipate a considerable flow energy in the plunge pool. Energy dissipation has to occur in a controlled man ...

2022

The concept of the mobilized domain: how it can explain and predict the forces exerted by a cohesive granular avalanche on an obstacle

Christophe Ancey, Johan Alexandre Philippe Gaume, Betty Sovilla, Michael Lukas Kyburz

The calculation of the impact pressure on obstacles in granular flows is a fundamental issue of practical relevance, e.g. for snow avalanches impacting obstacles. Previous research shows that the load on the obstacle builds up, due to the formation of forc ...

2022

Device for measuring instantaneous sprint velocity

Kamiar Aminian, Farzin Dadashi, Benoît Mariani, Salil Apte

The invention concerns a device for measuring instantaneous sprint velocity, said device consisting of at least one position and/or one velocity sensor and one IMU sensor that respectively provide position and/or velocity and acceleration signals and where ...

2021

Pressure on obstacles induced by granular snow avalanches

Michael Lukas Kyburz

The increasing population and the consequential demand for dwelling and recreation areas lead to more frequent conflicts between humans and natural hazards. In mountainous regions snow avalanches are, therefore, still a major threat to humans and infrastru ...

EPFL2021

Planar hydrodynamic traps and buried channels for bead and cell trapping and releasing

Philippe Renaud, Arnaud Bertsch, Daniel Migliozzi, Jonathan Bastien Cottet, Clémentine Sophie Sarah Lipp

We present a novel concept for the controlled trapping and releasing of beads and cells in a PDMS microfluidic channel without obstacles present around the particle or in the channel. The trapping principle relies on a two-level microfluidic configuration: ...

ROYAL SOC CHEMISTRY2021

Implantable blood pressure monitor

Grégoire Courtine, Jordan Squair

An implantable blood pressure monitor has two or more elements configured to wrap at least part way around a blood vessel. Changes in pressure within the blood vessel may be sensed by detecting movements of the elements or forces applied to the elements. A ...

2021

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021

Deep Boltzmann Machines: Rigorous Results at Arbitrary Depth

Emanuele Mingione, Diego Alberici

A class of deep Boltzmann machines is considered in the simplified framework of a quenched system with Gaussian noise and independent entries. The quenched pressure of a K-layers spin glass model is studied allowing interactions only among consecutive laye ...

2021

In situ control of the helical and skyrmion phases in Cu2OSeO3 using high-pressure helium gas up to 5 kbar

Henrik Moodysson Rønnow, Arnaud Magrez, Ivica Zivkovic, Jonathan White

We report a small-angle neutron scattering study of the helical and skyrmion lattice order in single-crystal Cu2OSeO3 under quasihydrostatic helium gas pressures up to 5 kbar. By using helium gas as the pressure-transmitting medium (PTM) we ensure pressure ...

AMER PHYSICAL SOC2020

Physical Mechanism and Flow Control of Tip Vortex Cavitation

Ali Amini

Occurrence of cavitation in hydraulic machines is a challenging issue because it is often accompanied with loss of efficiency, noise emissions, vibrations, and erosion damages. Tip vortices, in particular, are an ideal site for the development of cavitatio ...

EPFL2020