Publications related to Ultrafast carbothermal reduction of silica to silicon using a CO2 laser beam

Related publications (30)

Bodily implant microelectrode and bodily implant microelectrode fabrication method

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

The present invention concerns a bodily implantable or probe device and microelectrode fabrication method comprising providing at least one silicon substrate including an electronic device or unit; providing, on a first side of the silicon substrate, at le ...

2024

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Yves Bellouard, Victor Carle Adrien Boureau, Ruben Ricca

Crystallization of amorphous layers has been demonstrated under various radically different laser-exposure conditions, including continuous wave (cw) and pulsed lasers. Here, we investigate the specific role of ionization in the crystallization of dielectr ...

2024

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Sylvain Dunand

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Waterborne Virus Transport and Risk Assessment in Lake Geneva Under Climate Change

Tamar Kohn, Chaojie Li

Climate changes influence lake hydrodynamics and radiation levels and thus may affect the fate and transport of waterborne pathogens in lakes. This study examines the impact of climate change on the fate, transport, and associated risks of four waterborne ...

2024

Equivalent black carbon concentration measured with an aethalometer AE33 during the Arctic Ocean 2018 expedition

Julia Schmale, Andrea Baccarini, Benjamin Jérémy Laurent Heutte

Equivalent black carbon (eBC) mass concentration was measured with a commercial aethalometer (model AE33, Magee Scientific, Berkeley, USA). Measurements were performed onboard of the Swedish icebreaker (I/B) Oden from August to September 2018 as part of th ...

EPFL Infoscience2024

Benign termination of runaway electron beams on ASDEX Upgrade and TCV

Stefano Coda, Basil Duval, Joan Decker, Umar Sheikh, Claudia Colandrea, Luke Simons, Jean Arthur Cazabonne

This paper discusses the development of a benign termination scenario for runaway electron (RE) beams on ASDEX Upgrade and TCV. A systematic study revealed that a low electron density (n e) companion plasma was required to achieve a large MHD instability, ...

Iop Publishing Ltd2024

Wavelength-stabilized figure-of-9 thulium-doped all-fiber laser emitting 560 fs pulses

Camille Sophie Brès, Moritz Bartnick, Gayathri Bharathan

We demonstrate a figure-of-9 all-fiber thulium-doped laser (TDFL) that generates 560 fs long pulses at 1948 nm wavelength. In order to achieve self-starting passive mode-locking, we utilize an in-fiber Faraday rotator to induce a nonreciprocal phase shift. ...

Iop Publishing Ltd2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Simone Iadanza

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Lyesse Laloui, Elena Ravera, Sofie Elaine ten Bosch

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

Pergamon-Elsevier Science Ltd2024

Single-Photon Avalanche Diode Image Sensors for Harsh Radiation Environments

Ming-Lo Wu

The space industry has experienced substantial growth in recent years, leading to rapid advancements in space exploration and space-based technologies. Consequently, the study of electronics and sensor performance in extreme environments has become crucial ...

EPFL2024

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

Radiation-tolerant Multichannel Dew Point Temperature Monitoring System for High Energy Physics Applications

Amar Kapic

The next generation of high-energy physics (HEP) detectors will predominantly be silicon-based. As pixel sensor technology gains momentum and the number of channels surpasses one billion (for a volume of approximately 20 m3) to achieve the high resolution ...

EPFL2023

On the interaction of femtosecond laser pulses with layered dielectric materials

Ruben Ricca

Materials properties are strictly dependent on their microstructure. The internal symmetries and the disposition of the constituting atoms of a material, which depend on its crystallographic structure, greatly affect its response to mechanical, electromagn ...

EPFL2023

In situ monitoring of femtosecond laser-induced modifications in dielectrics

Olivier Bernard

Over the last decades, the progress made in the generation of laser pulses shorter than a picosecond (10^-12 s) has allowed us to reach extreme optical power intensities exceeding 10^15 W cm^-2. This tremendous power has triggered an abundance of original ...

EPFL2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Assim Boukhayma, Olivier Bernard, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Silica aerogel as rear reflector in silicon heterojunction solar cells for improved infrared response

Deniz Türkay

Silicon (Si), with its indirect bandgap, is a non-ideal absorber. Thus, various strategies to boost silicon solar cells' efficiency, including advanced texturing, multilayer anti-reflecting coating, and rear reflectors are utilized. Dielectrics, deposited ...

ELSEVIER2023