Publications related to Formation and Stabilization of Inorganic Halide Perovskites for Photovoltaics

Related publications (33)

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

Perovskite solar cells (PSCs) offer an attractive solution to increase the efficiency of PV panels via perovskite/silicon tandems thanks to their potential cost-effectiveness and high efficiency. In inverted PSC architecture (p-i-n), commonly used hole con ...

EPFL2024

Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Nickel oxide (NiOx)-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial r ...

Wiley2024

Phase-stable indium sulfide achieves an energy conversion efficiency of 14.3% for solar-assisted carbon dioxide reduction to formate

Michael Graetzel, Jingshan Luo, Jing Gao, Jun Li

Tremendous efforts have been made in developing highly selective catalysts for electrochemical CO 2 conversion to formate. However, the rapid deactivation resulting from structural reconstruction and phase transition poses considerable challenges to the sy ...

Cell Press2024

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Mounir Driss Mensi, Masaud Hassan S Almalki, Anwar Qasem M Alanazi

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Elsevier2024

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Mohammad Khaja Nazeeruddin, Bin Ding, Yong Ding

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate du ...

Nature Portfolio2024

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Wei-Hsu Hu

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

EPFL2024

Computational Studies on the Stability of Organic-Inorganic Hybrid Halide Lead Perovskites

Mathias Dankl

Perovskite-based solar cells are currently the most rapidly advancing photovoltaic technology but concerns about their long-term stability are still impeding full-scale commercialization. This thesis provides computational insights into some of the stabili ...

EPFL2024

Elimination of buried interfacial voids for efficient perovskite solar cells

Bin Ding, Xianfu Zhang

Establishing optimal interfacial contact is crucial for enhancing the efficiency of perovskite solar cells (PSCs). However, formation of voids at buried interface of perovskite films often hinders this critical objective. Our investigation reveals that the ...

Elsevier2024

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

David Lyndon Emsley, Aditya Mishra, Michael Allan Hope, Manuel Cordova, Ümmügülsüm Günes

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

Wiley-VCH Verlag GmbH2024

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Parnian Ferdowsi, Kevin Sivula, Jun Ho Yum, Jiyoun Seo

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Royal Society of Chemistry2024

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Strain relaxation and multidentate anchoring in n-type perovskite transistors and logic circuits

Mohammad Khaja Nazeeruddin, Olga Syzgantseva

The engineering of tin halide perovskites has led to the development of p-type transistors with field-effect mobilities of over 70 cm2 V-1 s-1. However, due to their background hole doping, these perovskites are not suitable for n-type transistors. Ambipol ...

Nature Portfolio2024

Steric hindrance driven passivating cations for stable perovskite solar cells with an efficiency over 24%

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Yi Zhang, Jianxing Xia

In this work, a series of passivating salts for perovskite solar cells (PSCs) based on ortho-methylammonium iodide functional units are molecularly engineered to study the steric hindrance driven passivation effect. The incorporation of fluorine atoms into ...

Royal Society of Chemistry2023

Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Zaiwei Wang, Mingyang Wei

Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field cont ...

American Association for the Advancement of Science2023

Role of Ionic Liquids in Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Bin Ding, Yong Ding, Xianfu Zhang

Although the power conversion efficiency of perovskite solar cells (PSCs) has reached 25.7%, there is still great potential for improvement in their performance and stability. In the past few years, ionic liquids (ILs) have been extensively investigated an ...

WILEY-V C H VERLAG GMBH2023

Interface connection of functionalized carbon nanotubes for efficient and stable perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia

The ionic defects of hetero-junction interfaces always attract and trap carriers via surface electrostatic forces, which are crucial for the efficiency and intrinsic stability of perovskite solar cells (PSCs). Herein, functionalized carbon nanotubes (CNTs) ...

Royal Society of Chemistry2023

Foldable Hole-Transporting Materials for Merging Electronic States between Defective and Perfect Perovskite Sites

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Yi Zhang, Hiroyuki Kanda, Kasparas Rakstys, Jianxing Xia, Keith Gregory Brooks, Xiaoxin Gao

Defective and perfect sites naturally exist within electronic semiconductors, and considerable efforts to reduce defects to improve the performance of electronic devices, especially in hybrid organic-inorganic perovskites (ABX(3)), are undertaken. Herein, ...

Wiley-V C H Verlag Gmbh2023

CsPbBr3 Quantum Dots-Sensitized Mesoporous TiO2 Electron Transport Layers for High-Efficiency Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jingshan Luo, Felix Thomas Eickemeyer, Hong Zhang, Jing Gao

The carrier transport layer plays a critical role in high efficiency and stable perovskite solar cells (PSCs). Herein, CsPbBr3 quantum dots-sensitized mesoporous TiO2 (CPB-TiO2) electron transport layer for fabricating high-quality perovskite films with en ...

WILEY-V C H VERLAG GMBH2023

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Yelin Hu, Hongwei Zhu, Zhongjin Shen, Jialin Wang

Surface defects cause non-radiative charge recombination and reduce the photovoltaic performance of perovskite solar cells (PSCs), thus effective passivation of defects has become a crucial method for achieving efficient and stable devices. Organic ammoniu ...

WILEY-V C H VERLAG GMBH2023