Publications related to A Low-Rate Identification Method for Digital Predistorters Based on Volterra Kernel Interpolation

Identification of typical district configurations: A two-step global sensitivity analysis framework

François Maréchal, Jonas Schnidrig, Cédric Terrier

The recent geopolitical conflicts in Europe have underscored the vulnerability of the current energy system to the volatility of energy carrier prices. In the prospect of defining robust energy systems ensuring sustainable energy supply in the future, the ...

Pergamon-Elsevier Science Ltd2024

Vibrational NDT with Under-sampled Data through Physics-informed Neural Networks

Olga Fink

The vibrational response of solid materials and structural components is substantially governed by their mechanical and geometrical properties. Low-frequency vibrations and modal frequencies are sensitive to global geometrical deviations, while high-freque ...

2023

A Proximal-Point Lagrangian-Based Parallelizable Nonconvex Solver for Bilinear Model Predictive Control

Colin Neil Jones, Yingzhao Lian, Yuning Jiang

Nonlinear model predictive control (NMPC) has been widely adopted to manipulate bilinear systems with dynamics that include products of the inputs and the states. These systems are ubiquitous in chemical processes, mechanical systems, and quantum physics, ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Photonic radar for contactless vital sign detection

Yang Liu

Vital sign detection is used across ubiquitous scenarios in medical and health settings, and contact and wearable sensors have been widely deployed. However, they are unsuitable for patients with burn wounds or infants with insufficient areas for attachmen ...

Nature Publishing Group2023

An Error-Based Approximation Sensing Circuit for Event-Triggered Low-Power Wearable Sensors

David Atienza Alonso, Silvio Zanoli, Alexandre Sébastien Julien Levisse, Tomas Teijeiro Campo, Flavio Ponzina

Event-based sensors have the potential to optimize energy consumption at every stage in the signal processing pipeline, including data acquisition, transmission, processing, and storage. However, almost all state-of-the-art systems are still built upon th ...

2023

Identification of typical district configurations: A two-step global sensitivity analysis framework

François Maréchal, Jonas Schnidrig, Cédric Terrier

The recent geopolitical conflicts in Europe highlighted the sensibility of the current energy system to the volatility of energy carrier prices. In the prospect of defining robust energy system configurations to ensure energy supply stability, it is necess ...

2023

Optimizing Sales Forecasting, Inventory, Pricing and Sourcing Decisions

Yara Kayyali El Alem

In this thesis we address various factors that contribute both theoretically and practically to mitigating supply demand mismatches. The thesis is composed of three chapters, where each chapter is an independent scientific paper. In the first paper, we dev ...

EPFL2023

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Franco Maloberti, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

Kyojin Choo

This work presents an acoustic analog front-end based on a delta sigma-modulated sample and average common-mode feedback technique. The proposed feedback offers a process and temperature stable high pass (HP) frequency corner, unity dc feedback gain, and a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Spike-Based Sensing and Communication for Highly Energy-Efficient Sensor Edge Nodes

Mihai Adrian Ionescu, Teodor Rosca

Highly energy-efficient wireless sensor nodes are a prerequisite for a sustainable operation of the Internet of things. Therefore, classical approaches for system design based on digital signal processing are not a viable solution, but system design has to ...

IEEE2022

Aging investigation of the latest standard dual power modules using improved interconnect technologies by power cycling test

Yi Zhang, Rui Wu

The latest standard "New Dual" power module has been developed for both silicon and silicon-carbide devices to meet the increasing demands in high reliability and high temperature power electronic applications. Due to the new package is just starting to re ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Spray-Assisted Formation of Micrometer-Sized Emulsions

Esther Amstad, Mathias Steinacher

Emulsion drops with defined sizes are frequently used to conduct chemical reactions on picoliter scales or as templates to form microparticles. Despite tremendous progress that has been achieved in the production of emulsions, the high throughput formation ...

AMER CHEMICAL SOC2022

High-Speed ADC Design and Optimization for Wireline Links

Ayça Akkaya

The ever-growing global internet traffic has increased demand for higher speed data transmission. As the bandwidth requirements of wireline links increase, extensive digital equalization techniques are required to compensate for the high-frequency channel ...

EPFL2021

Uncertain Sampling with Certain Priors

Golnooshsadat Elhami

Sampling has always been at the heart of signal processing providing a bridge between the analogue world and discrete representations of it, as our ability to process data in continuous space is quite limited. Furthermore, sampling plays a key part in unde ...

EPFL2021

An 8-Bit 800 MS/s Loop-Unrolled SAR ADC With Common-Mode Adaptive Background Offset Calibration in 28 nm FDSOI

Yusuf Leblebici, Ayça Akkaya, Firat Çelik

This paper presents a low-power single-channel 8-bit loop-unrolled (LU) successive approximation register (SAR) analog-to-digital-converter (ADC) with a novel common-mode adaptive background comparator offset calibration scheme. LU-SAR ADCs use multiple co ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Analysis system and method for analysing the movement of a portion of the body and/or of a human prosthesis

Silvestro Micera, Andrea Crema, Fiorenzo Artoni

An analysis method (200) for analysing the pressure exerted by a portion of the body and/or of a human prosthesis comprises the following steps: sampling data generated by the portion of the body and/or the human prosthesis during a threshold calibration p ...

2021

Energy-Efficient Design Techniques for High-Speed Wireline Serial Links

Firat Çelik

The exponential growth in computing power and multimedia services has caused a tremendous increase in data traffic in recent years. This increase in data traffic brings a strong demand for data bandwidth of electrical input/output (I/O) links and pushes th ...

EPFL2021

Printed Iontophoretic‐Integrated Wearable Microfluidic Sweat‐Sensing Patch for On‐Demand Point‐Of‐Care Sweat Analysis

Danick Briand, Silvia Demuru, Brince Paul Kunnel

In recent years, wearable epidermal sweat sensors have received extensive attention owing to their great potential to provide personalized information on the health status of individuals at the molecular level. For on‐demand medical analysis of sweat in se ...

Wiley2021

A 32 Gb/s PAM-16 TX and ADC-Based RX AFE with 2-tap embedded analog FFE in 28 nm FDSOI

Yusuf Leblebici, Ayça Akkaya, Firat Çelik

This paper presents a 32 Gb/s 16-level pulse amplitude modulation (PAM-16) source-series-terminated transmitter (TX) and a receiver (RX) analog front-end (AFE) in 28 nm FDSOI. The 8-way time-interleaved successive-approximation register (SAR) analog-to-dig ...

2021

A 0.4 nJ Excitation Energy Bridge-to-Digital Converter for Implantable Pulmonary Artery Pressure Monitoring

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) suitable for measuring the pulmonary artery pressure of heart failure patients with an implantable system. The duty-cycled bridge uses resistanc ...

IEEE2021