Publications related to CNC-fabricated dovetails for Joints of Prefabricated CLT Components

Related publications (24)

Secure Interface Design Leveraging Hardware/Software Support

Computer systems rely heavily on abstraction to manage the exponential growth of complexity across hardware and software. Due to practical considerations of compatibility between components of these complex systems across generations, developers have favou ...

EPFL2024

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

Nicolas Henry Pierre Louis Rogeau

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023

Reuse of Load-Bearing Timber Elements - Case Study of a Lookout Tower in Lausanne, Switzerland

Corentin Jean Dominique Fivet, Julius Natterer, Jonas Warmuth, Edisson Xavier Estrella Arcos

The construction industry is jeopardizing Earth’s environment; current mitigation efforts do not suffice; and additional sustainable strategies are required. One such strategy consists of reusing structural building elements over multiple service lives. In ...

Curran Associates, Inc.2023

A Conceptual Framework for Integrating Conversational Agents in Digital Education

Juan Carlos Farah

The presence of conversational agents (or chatbots) in educational contexts has been steadily increasing over the past few years. Recent surveys have shown widespread interest in the use of chatbots in education, both for research and practice. Although th ...

EPFL2023

A Collaborative Workflow to Automate the Design, Analysis, and Construction of Integrally-Attached Timber Plate Structures

Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper introduces a computational framework that fosters collaboration between architects, engineers, and contractors by bridging the gap between architectural design, structural analysis, and digital construction. The present research is oriented towa ...

CAADRIA2022

Design of Integrally-Attached Timber Plate Structures

Yves Weinand

Design of Integrally-Attached Timber Plate Structures outlines a new design methodology for digitally fabricated spatial timber plate structures, presented with examples from recent construction projects. It proposes an innovative and sustainable design me ...

Routledge, Taylor & Francis Group, London, 20222021

Design-to-Fabrication Workflow for Raw-Sawn-Timber using Joinery Solver

Petras Vestartas

Currently, the Swiss timber industry in mountain areas largely exports unprocessed lumber and imports finished timber products due to the lack of digital tools. By using new digital design-to-production workflows, it is possible to investigate new building ...

EPFL2021

Structural design methodology in Integrally-Attached Timber Plate structures

Aryan Rezaei Rad, Petras Vestartas

The immediate application of research discoveries requires a global and exact understanding of the structure under consideration. To gain insight into the complex behavior of structures, numerical simulations are carried out in parallel to physical experim ...

Routledge, Taylor & Francis Group2021

An integrated design tool for timber plate structures to generate joints geometry, fabrication toolpath, and robot trajectories

Yves Weinand, Nicolas Henry Pierre Louis Rogeau

This paper presents an integrated design tool for structures composed of engineered timber panels that are connected by traditional wood joints. Recent advances in computational architecture have permitted to automate the fabrication and assembly of such s ...

2021

Virtual reality enabled building-data management through the combination of a fully integrated IFC-BIM model and an IoT-based building management system

Sergi Aguacil Moreno, Laurent Deschamps, Sebastian Duque Mahecha, Alexandre Denis Stoll, Tiago De Sousa Pereira

Professionals involved in building construction and monitoring increasingly implement new practices made available by Building Information Modelling (BIM), Virtual Reality (VR) and the Internet of Things (IoT). In spite of numerous efforts, most methods in ...

2021

Case-Study on the Creep Behavior of Interconnected Timber Elements using Wood-Wood Connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet, Martin Thomas Nakad

With the increasing use of automation and computer-aided manufacturing in timber construction, a standardized timber construction system using digitally produced wood-wood connections has recently been developed for basic building components. Its structura ...

EPFL2021

Reliability analysis of welded stud shear connectors on simply-supported bridge girders

Scott Walbridge, Matthew James Sjaarda

This paper examines the reliability of welded stud shear connectors for steel-concrete composite bridge girders. A finite element model of a simply-supported bridge was created featuring link connector elements representing the shear studs between beam and ...

CANADIAN SCIENCE PUBLISHING2021

Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections

Julien Gamerro

Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...

EPFL2020

Joinery Solver for Whole Timber Structures

Yves Weinand, Petras Vestartas

This paper presents a digital joinery generation method for whole-timber structures using wood-wood connections. The research is based on a collaboration with a local timber company located in a mountain area [1]. In this context, there is a need to explor ...

2020

Experimental investigations on the load-carrying capacity of digitally produced wood-wood connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

The rise of digital fabrication has increased the use of wood-wood connections inspired by traditional carpentry in modern timber constructions. With recent developments on standard construction systems, the mechanical behavior of such joints for in-plane ...

2020

The SONATA data format for efficient description of large-scale network models

Eilif Benjamin Muller, Werner Alfons Hilda Van Geit, James Gonzalo King, Jean-Denis Georges Emile Courcol, Judit Planas Carbonell, Michael Emiel Gevaert, Juan Bautista Hernando Vieites, Adrien Michel Achille Devresse

Increasing availability of comprehensive experimental datasets and of high-performance computing resources are driving rapid growth in scale, complexity, and biological realism of computational models in neuroscience. To support construction and simulation ...

2020

Characterization of mortar-timber and timber-timber cyclic friction in timber floor connections of masonry buildings

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

The seismic performance of buildings depends critically on the stiffness and strength of storey diaphragms. Whilst for modern reinforced concrete or steel structures the connection between floors and lateral resisting members is often assumed as monolithic ...

SPRINGER2020

Mechanical Characterization of Integrally-Attached Timber Plate Structures: Experimental studies and macro modeling technique

Aryan Rezaei Rad

Spurred by the recent advancements in Computer-Aided Design (CAD), Integral Mechanical Attachment (IMA) technique has been resurrected. Using IMAs, connections between timber elements are established through their form, instead of using additional connecto ...

EPFL2020

Experimental investigation of mesoscale variability of clear spruce mechanical properties in the radial direction

Thomas Keller, Anastasios Vassilopoulos, Alireza Farajzadeh Moshtaghin

The aim of this work is the investigation of mesoscale/local variability in mechanical properties of clear timber in the radial direction. Clear Norway spruce wood, Picea abies, was used for cutting specimens of different lengths with a small cross-section ...

2020

Modelling Workflow for Segmented Timber Shells using Wood-wood Connections

Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...

Springer2019