Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Sputtering

Related publications (30)

Nanostructure and Optical Property Tailoring of Zinc Tin Nitride Thin Films through Phenomenological Decoupling: A Pathway to Enhanced Control

Aïcha Hessler-Wyser, Johann Michler, Caroline Hain, Daniele Casari

This work addresses the need for precise control of thin film sputtering processes to enable thin film material tailoring on the example of zinc tin nitride (ZTN) thin films deposited via microwave plasma-assisted high power reactive magnetron sputtering ( ...

Amer Chemical Soc2024

Scanning Tunneling Microscopy for Molecules: Effects of Electron Propagation into Vacuum

Klaus Kern, Abhishek Grewal

Using scanning tunneling microscopy (STM), we experimentally and theoretically investigate isolated platinum phthalocyanine (PtPc) molecules adsorbed on an atomically thin NaCl(100) film vapor deposited on Au(111). We obtain good agreement between theory a ...

Amer Chemical Soc2024

Manufacturing-Enabled Tunability of Linear and Nonlinear Epsilon-Near-Zero Properties in Indium Tin Oxide Nanofilms

Jiaye Wu

Epsilon-near-zero (ENZ) materialshave attracted great interestdue to their exotic linear and nonlinear responses, which makes itsignificant to tune ENZ wavelengths for wavelength-dependent applications.However, studies to achieve tunability in a wide spect ...

AMER CHEMICAL SOC2023

Status of SPIDER beam source after the first 3.5 years of operation

Basile Marie Jacques Pouradier Duteil

SPIDER is the negative ion source testbed for ITER neutral beam injector. It is currently the largest negative ion source ever built, equipped with a 100 keV accelerator, aiming at producing a negative ion beam with an extracted current density in hydrogen ...

2023

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Caroline Hain

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

EPFL2023

Investigations on Caesium Dispersion and Molybdenum Coating on SPIDER Components

Basile Marie Jacques Pouradier Duteil

SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydroge ...

2023

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, Caroline Hain

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

Implementation of multi-component Zhdanov closure in SOLEDGE3X

Davide Galassi, Madhusudan Raghunathan

The multi-component fluid closure derived by Zhdanov (2002 Transport Processes in Multicomponent Plasma (London: Taylor and Francis)) is implemented in the fluid code SOLEDGE3X-EIRENE to deal with arbitrary edge plasma composition. The closure assumes no d ...

2022

Simulating energetic particle losses in JET plasmas with a reverse integration biasing scheme

Mario Ludovico Podesta, Matteo Vallar

An integrated energetic particle transport model has been constructed in JET plasmas constrained by experimental fast ion loss measurements. The model incorporates a synthetic fast ion loss detector identical to JET's thin-foil Faraday cup fast ion loss de ...

IOP Publishing Ltd2022

Near-field probing of image phonon-polaritons in hexagonal boron nitride on gold crystals

Sergejs Boroviks

Near-field mapping has been widely used to study hyperbolic phonon-polaritons in van der Waals crystals. However, an accurate measurement of the polaritonic loss remains challenging because of the inherent complexity of the near-field signal and the substr ...

AMER ASSOC ADVANCEMENT SCIENCE2022

Surface Analysis by Secondary Ion Mass Spectrometry (SIMS): Principles and Applications from Swiss Laboratories

Anders Meibom, Stéphane Laurent Escrig, Lukas Baumgartner, Florent Olivier Vivien Plane

Secondary Ion Mass Spectrometry (SIMS) extracts chemical, elemental, or isotopic information about a localized area of a solid target by performing mass spectrometry on secondary ions sputtered from its surface by the impact of a beam of charged particles. ...

SWISS CHEMICAL SOC2022

Vapor Transport Deposition of Methylammonium Iodide for Perovskite Solar Cells

Christophe Ballif, Quentin Thomas Jeangros, Florent Sahli, Björn Niesen, Cédric Bucher, Quentin Jean-Marie Armand Guesnay, Aymeric Michel Schafflützel, Nathanaël Miaz

Vapor-based processes are promising options to deposit metal halide perovskite solar cells in an industrial environment due to their ability to deposit uniform layers over large areas in a controlled environment without resorting to the use of (possibly to ...

2021

New Evidence for Ag-Sputtered Materials Inactivating Bacteria by Surface Contact without the Release of Ag Ions: End of a Long Controversy?

Juan Kiwi, Sami Rtimi

The study provides new evidence for Ag-coated polyester (PES) mediating Escherichia colt inactivation by way of genetically engineered E. coli (without porins, from now denoted porinless bacteria). This allows the quantification of the bactericidal kinetic ...

AMER CHEMICAL SOC2020

Comparison of high density and nitrogen seeded detachment using SOLPS-ITER simulations of the tokamak a configuration variable

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Kevin Henricus Annemarie Verhaegh, Mirko Wensing, Hugo De Oliveira, Lorenzo Martinelli

First of a kind SOLPS-ITER simulations on tokamak a configuration variable (TCV) that include nitrogen have been performed to model recent nitrogen seeded detachment experiments. Based on spectroscopic measurements, a nitrogen recycling coefficient R-p(N) ...

2020

Co-Sputtered Monocrystalline GeSn for Infrared Photodetection

Anna Fontcuberta i Morral, Andreas Schueler, Josef Andreas Schuler, Anna Krammer, Luc Burnier, Andrea Giunto, Nicolas Philippe Laurent Humblot

We demonstrate monocrystalline growth of GeSn on Ge and Si substrates by co-sputtering. We discuss the evolution of film growth with thickness, elucidating the effects of substrate temperature, sputtering source, and the importance of hydrogen dilution in ...

IEEE2020

Biological responses at the interface of Ti-doped diamond-like carbon surfaces for indoor environment application

Sami Rtimi

Diamond-like carbon (DLC) and titanium-doped DLC coatings were prepared by hybrid PECVD/direct current magnetron sputtering (DCMS). In this study, we show that the operating conditions of titanium-doped DLC coatings used for implants in surgical devices si ...

SPRINGER HEIDELBERG2020

Tribological behaviour of galvanic gold coatings reinforced with silica nanoparticles

Stefano Mischler, Anna Neus Igual Muñoz

Electroplated composite Au/SiO2 coatings on a nickel substrate have been produced by dispersing an emulsion of silica nanoparticles (20 nm in diameter) in an industrial hard-gold bath. The tribological behaviour of the Au/SiO2 coatings with different SiO2 ...

2020

Recent advances on sputtered films with Cu in ppm concentrations leading to an acceleration of the bacterial inactivation

Juan Kiwi, Sami Rtimi

This review focuses on the acceleration of the bactericidal and fungicidal effects by uniform, adhesive Cu-based nanocomposites on textile and thin polymer surfaces. The acceleration of the bacterial inactivation kinetics mediated by Cu, TiO2/Cu and ZrO2-T ...

ELSEVIER2020

Plasma-enhanced atomic layer deposition of nickel nanotubes with low resistivity and coherent magnetization dynamics for 3D spintronics

Anna Fontcuberta i Morral, Dirk Grundler, Simon Robert Escobar Steinvall, Maria Carmen Giordano

We report plasma-enhanced atomic layer deposition (ALD) to prepare conformal nickel thin films and nanotubes by using nickelocene as a precursor, water as the oxidant agent and an in-cycle plasma enhanced reduction step with hydrogen. The optimized ALD pul ...

2020

Miniaturized mr device comprising a cell culture micro-chamber and method for manufacturing such a device

Jürgen Brugger, Giovanni Boero, Marco Grisi, Gaurasundar Marc Conley

MR device (100) comprising a miniaturized magnetic resonance system (101) and a cell culture chamber (502) for the analysis of biological samples of less than about 1000 µm in size, wherein said device (100) is at least partially covered by a passivation-b ...

2020