Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Voltage drop

Related publications (29)

Power Aware Placement of On-Chip Voltage Regulators

Rassul Bairamkulov

In traditional power delivery networks, the on-chip supply voltage is provided by board-level converters. Due to the significant distance between the converter and the load, variations in the load current are not effectively managed, producing a significan ...

Ieee-Inst Electrical Electronics Engineers Inc2024

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Kyojin Choo

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

X-Attack 2.0: The Risk of Power Wasters and Satisfiability Don’t-Care Hardware Trojans to Shared Cloud FPGAs

Mirjana Stojilovic, Dina Gamaleldin Ahmed Shawky Mahmoud, Beatrice Shokry Samir Shokry

Cloud computing environments increasingly provision field-programmable gate arrays (FPGAs) for their programmability and hardware-level parallelism. While FPGAs are typically used by one tenant at a time, multitenant schemes supporting spatial sharing of c ...

2024

DC Power Distribution Networks with Direct Current Transformers

Renan Pillon Barcelos

The shift towards DC power distribution networks, enabled by power electronics technologies, is changing the nature of electrical power systems. Nowadays, DC power distribution networks can effectively support the high penetration of distributed energy res ...

EPFL2024

On Energy Control of Modular Multilevel Converters

Milan Utvic

Owing to the advancements in the area of power electronics, efficient and flexible ac to dc conversion is made possible, bringing back into focus the idea of the dc power transmission at various voltage levels. Several technical and economical factors advo ...

EPFL2023

Protection unit for wide bandgap power switching device and method for operating the wide bandgap power switching device

Drazen Dujic, Chengmin Li

The invention relates to a method for operating a power switching device, particularly a wide bandgap power switching device, in a power application, particularly in a converter, comprising the steps of:- checking (S2) a transient voltage of or related to ...

2023

Control upgrade for the TCV coils power supplies

Damien Fasel, Ugo Siravo, Jérémie Dubray, Nicolas Cherix

The Tokamak a` Configuration Variable (TCV) coil converters are fed, during the plasma pulse, by a flywheel generator (FG) providing the AC voltages few seconds before the plasma pulse. The synchronization with the 120 Hz frequency delivered by the FG, var ...

ELSEVIER SCIENCE SA2023

Quench experiments on sub-size HTS Cable-In-Conduit Conductors for fusion applications: Data analysis and model validation

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Ortensia Dicuonzo

The recent experimental campaign, carried out in the upgraded SULTAN facility and supported by EUROfusion, investigated quench propagation in high field, sub-size HTS Cable-In-Conduit Conductors. The available experimental data consist of voltage, jacket a ...

ELSEVIER SCI LTD2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

IOP Publishing Ltd2023

Deep defects in InGaN LEDs: modeling the impact on the electrical characteristics

Nicolas Grandjean, Jean-François Carlin, Camille Haller

Deep defects have a fundamental role in determining the electro-optical characteristics and in the efficiency of InGaN light-emitting diodes (LEDs). However, modeling their effect on the electrical characteristics of the LED is not straightforward. ...

SPIE-INT SOC OPTICAL ENGINEERING2022

On the Ohmic-dominant heating mode of capacitively coupled plasma inverted by boundary electron emission

Haomin Sun, Guang-Yu Sun

Electron emission from the boundary is ubiquitous in a capacitively coupled plasma (CCP) and precipitates nonnegligible influence on the discharge properties. Here, we present Particle-in-Cell/Monte Carlo Collision simulation of an Ohmic-dominant heating m ...

AIP American Institute of Physics2022

High frequency IGCT operation for DC transformer

Gabriele Ulissi

In spite of the dominance of ac technology for the vast majority of power transmission and distribution since the late 19th century, the past decades have seen an increase in use of dc electrical power. In particular, this has been the case both in high vo ...

EPFL2022

Charge sensing properties ofmonolithic CMOS pixel sensors fabricated in a 65 nm technology

Francesco Piro

In this work the initial performance studies of the first small monolithic pixel sensors dedicated to charged particle detection, called CE-65, fabricated in the 65nm TowerJazz Panasonic Semiconductor Company are presented. The tested prototypes comprise m ...

ELSEVIER2022

Thermodynamics of organic electrochemical transistors

Matteo Cucchi

Though models describing the operating mechanism of organic electrochemical transistors (OECTs) have been developed, these models are unable to accurately reproduce OECT electrical characteristics. Here, the authors report a thermodynamic-based framework t ...

Nature Portfolio2022

Coordinated day-ahead dispatch of multiple power distribution grids hosting stochastic resources: An ADMM-based framework

Mario Paolone, Rahul Kumar Gupta, Sherif Alaa Salaheldin Fahmy

This work presents an optimization framework to aggregate the power and energy flexibilities in an interconnected power distribution systems. The aggregation framework is used to compute the day-ahead dispatch plans of multiple and interconnected distribut ...

Elsevier2022

Hybrid Modular Multilevel Converter for Pumped Hydro Storage Applications

Miodrag Basic

Energy balance in a power system must be maintained at all times, regardless of the variations in generation and consumption. Large Pumped Hydro Storage Plants (PHSPs) are introduced to the power system to accumulate the excess of energy during the low dem ...

EPFL2022

Design and Simulation of a Wide-Bandwidth CMUTs Array with Dual-Mixed radii and Multi Operating Modes

Yu Bai, Yihe Zhao

A capacitive micromachined ultrasonic transducers (CMUTs) array with dual-mixed radii is designed to improve bandwidth and realize multi-modes operating for immersed ultrasonic applications. The two-size (TS) CMUT array is composed of two sub-arrays with d ...

IEEE2021

p-GaN field plate for low leakage current in lateral GaN Schottky barrier diodes

Elison de Nazareth Matioli, Luca Nela, Catherine Erine

High-voltage gallium nitride Schottky barrier diodes (SBDs) suffer from large off-state leakage current, which further degrades during operation at high temperatures and limits the device blocking capabilities. The key to achieving low off-state leakage is ...

AIP American Institute of Physics2021

A Closed Time-Reversal Cavity for Electromagnetic Waves in Transmission Line Networks

Farhad Rachidi-Haeri, Marcos Rubinstein, Mario Paolone, Reza Razzaghi, Zhaoyang Wang

A closed time-reversal (TR) cavity has been considered a purely theoretical concept whose experimental realization was assumed to be impossible. In this article, we demonstrate that it is, in fact, possible to realize a closed TR cavity using a network of ...

2021

Schmitt trigger-based control strategy for the discharge phase of an ultra-high-voltage bidirectional flyback

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

The control strategy to discharge a capacitive load such as a dielectric elastomer actuator charged to several kilo-volts is critical to obtain a safe and reliable actuation. In the case of this publication, an ultra-high voltage bidirectional flyback conv ...

IEEE2021