César PulgarinProf. C. Pulgarin is Chemist from Lausanne University, Master in environmental chemistry from Geneva University, Ph D in synthesis bio-inspired of natural substances from Neuchâtel University. During his education he carried out several industrial trainings.
Since March 1989, he has been working at the EPFL where he is leader of the Advanced Oxidation Processes Group (GPAO) active in the development chemical, photochemical, electrochemical, ultrasonic processes, their coupling between them and with biological systems to degrade chemical and microbiological pollutants in water and air. He has an H index of 40 and he is the world most cited author in 1) TiO2 photo-assisted bacterial inactivation in water and 2) Coupling of photochemical and biological processes for pollutant degradation. He has been involved in ten African, South American and European international research projects. He has been Swiss representative in COST program 540.
Alex DommannTeaching & PhD Courses CCMX Advanced Course - Advanced X-ray Diffraction Methods for Coatings: strain, defects and deformation analysis of thin films MSE-628 After introducing thin film and HR-XRD characterisation methods, theory and limitations are discussed, including examples and how the film structure influences its characteristics. Protocols are presented for establishing reproducible and reliable measurements, and for interpreting their results. X-Ray Analysis for thin films
Hatice Altug2020-current Full Professor at the Institute of Bioengineering, EPFL, Switzerland2013-2020 Associate Professor (with tenure) at the Institute of Bioengineering, EPFL, Switzerland 2013 Associate Professor (with tenure) at Electrical and Computer Engineering Department of Boston University, USA 2007-2013 Assistant Professor (tenure-track) at Electrical and Computer Engineering Department of Boston University, USA 2007 Post-doctoral Fellow at Center for Engineering in Medicine of Harvard Medical School, USA 2000-2007 PhD. in Applied Physics at Stanford University, USA 1996-2000 B.S. in Physics at Bilkent University, Turkey
Frank NüeschTeaching & PhD PhD Students Elodie Didier, Ceren Mitmit, João Pedro Ferreira Assunção, Vahid Charkhesht Past EPFL PhD Students Hui Zhang, Simon Johannes Dünki, Yee Song Ko, Lei Wang, Sandra Christina Jenatsch, Nicolas Alexandre Serge Leclaire, Donatas Gesevicius, Surendra Babu Anantharaman, Markus Regnat, Philip Horst Caspari, Patrik Schürch, David Reber, Karen Verena Strassel, Sina Abdolhosseinzadeh, Matthias Diethelm, Francis Owusu, Camilla Arietta Vael-Garn, Yeerlan Adeli, Wei-Hsu Hu, Cansu Zeytun Kara
David Michael Volpe RuggieroTeaching & PhD PhD Students Ömer Faruk Behçet, Elias Merhi, Enrico Pinelli, Ahmad Abdulrahman Ahmad Majdouba, Muhammad Mahmood Mohi Ud Din Courses Reinforced concrete structures CIVIL-323 This course introduces the student to the behaviour and design of reinforced concrete structures. The student will learn the principles of analysis of reinforced concrete and how to design common concrete elements including columns, beams, and slabs. Reinforced concrete structures - advanced topics
Vinay SharmaExpertise
Computational Mechanics, Graph Machine Learning.
Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Raffaella BuonsantiTeaching & PhD PhD Students Riya Gupta, Jennifer Calderon Mora, Coline Boulanger, Moritz Tritschler, Marco Fabbiano, Seyedmohamadjavad Chabok, Hugh Andrew Warkentin Past EPFL PhD Students Chethana Janardhana Gadiyar, Seryio Saris, Valeria Mantella, Seyedehbehnaz Varandili, Pranit Srinivas Iyengar, Yannick Thomas Guntern, Jan Vávra, Laia Castilla Amorós, Valery Okatenko, Ona Segura Lecina, Ludovic Emile Frédy Zaza, Petru Pasquale Albertini Courses Introduction to chemical engineering Laboratory Works
Dragan DamjanovicDragan Damjanovic received BSc diploma in Physics from the Faculty of Natural Sciences and Mathematics, University of Sarajevo, in 1980, and PhD in Ceramics Science from the Department of Materials Science and Engineering, College of Earth and Mineral Sciences, the Pennsylvania State University (PSU) in 1987. From 1988 to 1991 he was a research associate in the Materials Research Laboratory at the PSU. He joined the Ceramics Laboratory, Department of Materials Science and Engineering, Ecole polytechnique fédérale de Lausanne in 1991. He is currently a "professeur titulaire", heads the Group for Ferroelectrics and Functional Oxides at the Institute of Materials and teaches undergraduate and graduate courses on structure and electrical properties of materials. The research activities include fundamental and applied investigations of piezoelectric, ferroelectric and dielectric properties of a broad class of materials.
Cristina Ramona Cudalbu MoldovanCristina Cudalbu obtained her Bachelors of Science degree in Medical Physics in 2002 and Masters of Science degree in Biophysics and Medical Physics in 2003, both from University Babes-Bolyai, Cluj-Napoca, Romania. In 2006 she obtained her PhD degree in Localized Proton MRS and time domain quantification of cerebral metabolites at 7T and 4.7T at University Lyon 1, RMN Laboratory, Villeurbanne, France.In 2007, she joined, as a Scientist, the Laboratory for Functional and Metabolic Imaging at EPFL, where she implemented new acquisition and quantification techniques for in vivo nitrogen, proton and carbon MRS for preclinical studies. Starting 2012, Cristina Cudalbu was appointed as Research Staff Scientist and 9.4T MRI Operational Manager at Centre d’Imagerie Biomédicale (CIBM) at EPFL. She is now developing new research lines at CIBM, being oriented towards new acquisition and quantification techniques for in vivo proton, phosphorous, carbon, nitrogen MRS and fast MRSI, diffusion weighted spectroscopy and brain macromolecules quantification. She is now applying these developments on chronic hepatic encephalopathy, a research area that she developed at CIBM (https://actu.epfl.ch/news/when-liver-disease-affects-the-brain/), and on different collaborative projects with researchers from the five partner institutions of CIBM. Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Jeremy LuterbacherExpertise
Biomass conversion Heterogeneous catalysis
See: https://www.epfl.ch/labs/lpdc/luterbacher/ Education Postdoc | Chemical Engineering 2014 – 2014 Univsersity of Wisconsin-Madison PhD | Chemical Engineering 2012 – 2012 Cornell University Master | Chemical Engineering 2010 – 2010 Cornell University Master | Chemical Engineering 2007 – 2007 �cole Polytechnique F�d�rale de Lausanne Bachelor | Chemistry and Ch 