Publications associées à Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels

Publications associées (39)

Additive Manufacturing of Metal Matrix Composites for Space Applications

Titanium-based Metal Matrix Composites (MMCs) offer remarkable mechanical, thermal, and corrosion resistance properties and are of high interest to several industrial sectors, including aerospace. One of the main commercial drawbacks of these materials, wh ...

EPFL2025

A Multiaxial Plasticity Model with Softening for Simulating Inelastic Cyclic Local Buckling in Steel Beam Columns Using Fiber Elements

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Diego Isidoro Heredia Rosa

This paper proposes a new effective multiaxial plasticity model to simulate inelastic cyclic buckling in steel frame members. The proposed constitutive formulation is expressed within the framework of rate-independent metal plasticity and replicates the pr ...

American Society of Civil Engineers (ASCE)2025

Understanding imbibition in cementitious materials including C-S-H strain measurement and geometric restriction

Maya Nicole Harris

Cementitious materials show anomalous behaviour during capillary imbibition: a lack of linearity of the mass gain versus the square root of time. This is considered to be caused by the water retention in the calcium silicate (C-S-H) structure (and conseque ...

2025

How Stress Biaxiality Controls Crack Morphology and Apparent Fracture Energy of Dikes and Sills

Marie Estelle Solange Violay, Antoine Guggisberg

The emplacement of dikes and sills plays a crucial role in crustal mechanics. The parameter used to describe their resistance to propagation, fracture energy, remains controversial. Here, we show how different stress biaxiality levels experienced by dikes ...

2025

Mechanoreceptive soft robotic molluscoids made of granular hydrogel-based organoelectronics

Esther Amstad, Josephine Anna Eleanor Hughes, Nana Obayashi, Lorenzo Lucherini, Francesca Bono

The viscoelasticity of many soft polymers renders flexible sensors susceptible to hysteresis and signal drift that limit their accuracy. To reduce the impact of viscoelasticity on the signal without compromising the softness of the material, we introduce e ...

2025

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Elyas Ghafoori, Christian Leinenbach, Irene Ferretto

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

Engineering Symmetry Breaking Interfaces by Nanoscale Structural-Energetics in Orthorhombic Perovskite Thin Films

Duncan Thomas Lindsay Alexander, Bernat Mundet

The atomic configuration of phases and their interfaces is fundamental to materials design and engineering. Here, we unveil a transition metal oxide interface, whose formation is driven by energetic influences─epitaxial tensile strain versus oxygen octahed ...

2025

Thermomechanical constitutive modeling of the Kirigami-inspired shape memory alloy

Yves Perriard, Thomas Guillaume Martinez, Marjan Ghorbani, Xinxin Liao

Shape memory alloys (SMAs) are unique materials capable of recovering predefined shapes through reversible phase transformations between austenite and martensite phases. This behavior enables SMAs to exhibit the shape memory effect and pseudoelasticity, al ...

2025

Experimental and ab initio derivation of interface stress in nanomultilayered coatings: Application to immiscible Cu/W system with variable in-plane stress

Claudia Cancellieri, Pandula Manura Liyanage

Interface stress is a fundamental descriptor for interphase boundaries and is defined in strict relation to the interface energy. In nanomultilayers with their intrinsically high interface density, the functional properties are dictated by the interface st ...

Elsevier2024

A Multiscale Bayesian Approach to Quantification and Denoising of Energy-dispersive X-ray Data

Cécile Hébert, Duncan Thomas Lindsay Alexander, Pau Torruella Besa

Energy dispersive x-ray (EDX) spectrum imaging yields compositional information with a spatial resolution down to the atomic level. However, experimental limitations often produce extremely sparse and noisy EDX spectra. Under such conditions, every detecte ...

IOP Publishing Ltd2025

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Congzhe Wang

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

Texture-enhanced Mechanical Stability of Transparent Electrodes for Flexible Optoelectronics with Near-infrared Response

Simon Baptiste Rieckhoff

Transparent electrodes with high conductivity and mechanical robustness are essential for flexible opto-electronic applications. Indium tin oxide (ITO) single layers have long been considered as unsuitable for flexible applications due to their brittleness ...

WILEY2025

Microsecond Time-Resolved Cryo-Electron Microscopy

Oliver Florian Harder

Recently, single-particle cryo-electron microscopy emerged as a technique capable of determining protein structures at near-atomic resolution and resolving protein dynamics with a temporal resolution ranging from second to milliseconds. This thesis describ ...

EPFL2024

Passivating oxidation behavior of Ti0.12Al0.21B0.67 coatings investigated by scanning transmission electron microscopy and chemical environment dependent density functional theory simulations

Johann Michler

The oxidation behavior of stoichiometric Ti0.12Al0.21B0.67 coatings is investigated by scanning transmission electron microscopy (STEM) after oxidizing for 1, 4 and 8 h at 700 degrees C and at 800 and 900 degrees C. In the as deposited state, a similar to ...

PERGAMON-ELSEVIER SCIENCE LTD2025

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Corentin Jean-Marie Rémi Noël, Barnaby Padraig Fryer

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

2024

Comprehensive benchmarking and user guide for the characterization of CVD-grown transition metal chalcogenides

Andras Kis, Yanfei Zhao

Since the discovery of graphene in 2004, there has been rapid progress in research on two-dimensional (2D) material’s potential applications with significant impact. Efforts to bring 2D materials closer to industrial production, quality assessment, and sta ...

Academia.edu Journals2025

Structural study of nickelate based heterostructures

Duncan Thomas Lindsay Alexander, Bernat Mundet, Chih-Ying Hsu

Heterostructures consisting of SmNiO3 and NdNiO3 alternating layers with additional LaAlO3 spacer layers were grown and fully characterized by means of x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy. A change in t ...

Aip Publishing2024

A Hybrid Method for Optimizing Radiation of Implantable Antennas in Diverse Scenarios

Anja Skrivervik, Mingxiang Gao

This paper presents a combination of three computational methods in a hybrid approach designed to model the radiation of antennas within arbitrarily shaped capsules implanted in a host body. A surface method of moments is employed to represent the radiatio ...

IEEE2025

Strain engineering and strain measurement by spring tethers on suspended epitaxial GaN-on-Si photonic crystal devices

Romuald Houdré, Jun Wang

Suspended epitaxial gallium nitride (GaN) on silicon (Si) photonic crystal devices suffer from large residual tensile strain, especially for long waveguides, because fine structures tend to crack due to large stress. By introducing spring-like tethers, des ...

Iop Publishing Ltd2024

High brightness neutron source optimized for very high pulsed magnetic field experiments

Mina Akhyani

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024