Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Titanium-based Metal Matrix Composites (MMCs) offer remarkable mechanical, thermal, and corrosion resistance properties and are of high interest to several industrial sectors, including aerospace. One of the main commercial drawbacks of these materials, wh ...

Cementitious materials show anomalous behaviour during capillary imbibition: a lack of linearity of the mass gain versus the square root of time. This is considered to be caused by the water retention in the calcium silicate (C-S-H) structure (and conseque ...

The viscoelasticity of many soft polymers renders flexible sensors susceptible to hysteresis and signal drift that limit their accuracy. To reduce the impact of viscoelasticity on the signal without compromising the softness of the material, we introduce e ...

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

The atomic configuration of phases and their interfaces is fundamental to materials design and engineering. Here, we unveil a transition metal oxide interface, whose formation is driven by energetic influences─epitaxial tensile strain versus oxygen octahed ...

Interface stress is a fundamental descriptor for interphase boundaries and is defined in strict relation to the interface energy. In nanomultilayers with their intrinsically high interface density, the functional properties are dictated by the interface st ...

Energy dispersive x-ray (EDX) spectrum imaging yields compositional information with a spatial resolution down to the atomic level. However, experimental limitations often produce extremely sparse and noisy EDX spectra. Under such conditions, every detecte ...

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

Transparent electrodes with high conductivity and mechanical robustness are essential for flexible opto-electronic applications. Indium tin oxide (ITO) single layers have long been considered as unsuitable for flexible applications due to their brittleness ...

Recently, single-particle cryo-electron microscopy emerged as a technique capable of determining protein structures at near-atomic resolution and resolving protein dynamics with a temporal resolution ranging from second to milliseconds. This thesis describ ...

The oxidation behavior of stoichiometric Ti0.12Al0.21B0.67 coatings is investigated by scanning transmission electron microscopy (STEM) after oxidizing for 1, 4 and 8 h at 700 degrees C and at 800 and 900 degrees C. In the as deposited state, a similar to ...

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

Since the discovery of graphene in 2004, there has been rapid progress in research on two-dimensional (2D) material’s potential applications with significant impact. Efforts to bring 2D materials closer to industrial production, quality assessment, and sta ...

Heterostructures consisting of SmNiO3 and NdNiO3 alternating layers with additional LaAlO3 spacer layers were grown and fully characterized by means of x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy. A change in t ...

This paper presents a combination of three computational methods in a hybrid approach designed to model the radiation of antennas within arbitrarily shaped capsules implanted in a host body. A surface method of moments is employed to represent the radiatio ...

Suspended epitaxial gallium nitride (GaN) on silicon (Si) photonic crystal devices suffer from large residual tensile strain, especially for long waveguides, because fine structures tend to crack due to large stress. By introducing spring-like tethers, des ...

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

Recent surging interest in strengthening of High Entropy Alloys (HEAs) with possible chemical ordering motivates the development of new theory. Here, an existing theory for random alloys that accounts for solute-dislocation and solute–solute interactions i ...

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Living photovoltaics are microbial electrochemical devices that use whole cell–electrode interactions to convert solar energy to electricity. The bottleneck in these technologies is the limited electron transfer between the microbe and the electrode surfac ...

Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels

Chat with Graph Search

Additive Manufacturing of Metal Matrix Composites for Space Applications

Understanding imbibition in cementitious materials including C-S-H strain measurement and geometric restriction

Mechanoreceptive soft robotic molluscoids made of granular hydrogel-based organoelectronics

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Engineering Symmetry Breaking Interfaces by Nanoscale Structural-Energetics in Orthorhombic Perovskite Thin Films

Experimental and ab initio derivation of interface stress in nanomultilayered coatings: Application to immiscible Cu/W system with variable in-plane stress

A Multiscale Bayesian Approach to Quantification and Denoising of Energy-dispersive X-ray Data

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Texture-enhanced Mechanical Stability of Transparent Electrodes for Flexible Optoelectronics with Near-infrared Response

Microsecond Time-Resolved Cryo-Electron Microscopy

Passivating oxidation behavior of Ti0.12Al0.21B0.67 coatings investigated by scanning transmission electron microscopy and chemical environment dependent density functional theory simulations

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Comprehensive benchmarking and user guide for the characterization of CVD-grown transition metal chalcogenides

Structural study of nickelate based heterostructures

A Hybrid Method for Optimizing Radiation of Implantable Antennas in Diverse Scenarios

Strain engineering and strain measurement by spring tethers on suspended epitaxial GaN-on-Si photonic crystal devices

High brightness neutron source optimized for very high pulsed magnetic field experiments

Solute-strengthening in metal alloys with short-range order

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Polydopamine-coated photoautotrophic bacteria for improving extracellular electron transfer in living photovoltaics