Publications associées à Tailoring the hydraulic impedance of out-of-plane micromachined electrospray sources with integrated electrodes

Impact of beam-coupling impedance on the Schottky spectrum of bunched beam

Tatiana Pieloni, Nicolas Frank Mounet, Christophe Emmanuel R. Lannoy

The Schottky monitors of the Large Hadron Collider (LHC) can be used for non-invasive beam diagnostics to estimate various bunch characteristics, such as tune, chromaticity, bunch profile or synchrotron frequency distribution. However, collective effects, ...

Iop Publishing Ltd2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

On the use of Cramér-Rao Lower Bound for least-variance circuit parameters identification of Li-ion cells

Mario Paolone, Vladimir Sovljanski

Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) are widely used to characterize the impedance and estimate parameters of electrochemical systems such as batteries. We use a generic ECM with ten parameters grouped to model ...

2024

Portable impedance-sensing device for microorganism characterization in the field

Sandro Carrara, Karim Bouzid

A variety of biosensors have been proposed to quickly detect and measure the properties of individual microorganisms among heterogeneous populations, but challenges related to cost, portability, stability, sensitivity, and power consumption limit their app ...

Nature Portfolio2023

Self-Synchronized Grid Impedance Estimation Unit using Interpolated DFT Technique

Drazen Dujic, Jules Christian Georges Macé, Andrea Cervone

Estimating the impedance of a grid-connected device or of a grid at the point of common coupling is important for evaluating the interaction between them. Impedance measurement involves a perturbation injection device, that perturbs the system, and a measu ...

2023

NbN films with high kinetic inductance for high-quality compact superconducting resonators

Edoardo Charbon, Simone Frasca, Pasquale Scarlino, Vincent Jean Yves Jouanny, Fabian Oppliger, Fabrizio Minganti, Marco Scigliuzzo, Roberto Musio

Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on NbN thin films present a o ...

American Physical Society (APS)2023

Portable Multi-Frequency Impedance-Sensing Device for Bacteria Classification in a Flowing Liquid

Sandro Carrara, Karim Bouzid

This paper presents a novel impedance-sensing device and its related microfluidics system developed to characterize the macroscopical properties of bacteria and microparticles. The system is based on a phase-sensitive detector with square-waves excitation ...

IEEE2022

Optimization of Edge Profile for Improved Anti-Resonance Quality Factor in Lithium Niobate SH0 Resonators

Luis Guillermo Villanueva Torrijo, Silvan Stettler

Thin-film lithium niobate (LNO) has been identified as a promising material platform for enabling high electromechanical coupling and low-loss piezoelectric resonators for filtering applications. In this work, the design and fabrication of fundamental shea ...

IEEE2022

Terminal Characteristics Measurements and Analysis of the Three-Phase Active Front End Converter Building Block

Marko Petkovic, Drazen Dujic

The safe and reliable operation of modern power system imposes the need to describe and estimate the system stability through impedance-admittance measurement and identification. The integration and operation of medium voltage equipment in existing infrast ...

Wiley2021

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

Aude Billard, Rui Wu

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

Single-Phase Measurement of the Output Impedance of the Four-Quadrant Cascaded H-Bridge Converter Cell Using Wideband Signals

Marko Petkovic, Drazen Dujic

The development and integration of power electronics equipment and converters for medium voltage ac and dc application has created different subsystem interactions that require proper investigation, understanding, description and estimation of global syste ...

IEEE2020

Real-Time Detection of Aerosol Metals Using Online Extractive Electrospray Ionization Mass Spectrometry

Christian Ludwig, Mohamed Tarik, Houssni Lamkaddam

Metal emissions are of major environmental and practical concern because of their highly toxic effects on human health and ecosystems. Current technologies available in the market for their detection are typically limited by a time resolution of 1 h or lon ...

AMER CHEMICAL SOC2020

Positional dependence of particles and cells in microfluidic electrical impedance flow cytometry: origin, challenges and opportunities

Philippe Renaud, Jonathan Bastien Cottet

Microfluidic electrical impedance flow cytometry is now a well-known and established method for single-cell analysis. Given the richness of the information provided by impedance measurements, this non-invasive and label-free approach can be used in a wide ...

2020

Infinitesimal asphericity changes the universality of the jamming transition

Matthieu Wyart, Carolina Brito Carvalho dos Santos

The jamming transition of non-spherical particles is fundamentally different from the spherical case. Non-spherical particles are hypostatic at their jamming points, while isostaticity is ensured in the case of the jamming of spherical particles. This stru ...

IOP PUBLISHING LTD2020

On the Differential Input Impedance of an Electro-Explosive Device

In this paper, a model for the input impedance of a hot-wire electro-explosive device (EED) based on differential-mode measurements is proposed. The model represents the EED using three transmission line segments in cascade. The characteristics of each seg ...

Institute of Electrical and Electronics Engineers2018

Impedance-based real-time position sensor for lab-on-a-chip devices

Philippe Renaud, Harald Van Lintel, Jonathan Bastien Cottet

This paper presents the theoretical and experimental development of an integrated position sensor for lab-on-a-chip devices. The interest for single cell analysis is growing. However, this requires monitoring and controlling cell displacements in real time ...

2018

Label-free identification of activated T lymphocytes through tridimensional microsensors on chip

Carlotta Guiducci, Elena Bianchi, Enrica Rollo, George Coukos, Enrico Tenaglia, Alexandre Harari

Label-free approaches to assess cell properties ideally suit the requirements of cell-based therapeutics, since they permit to characterize cells with minimal perturbation and manipulation, at the benefit of sample recovery and re-employment for treatment. ...

Elsevier2017

On the Optimisation of Multi-Degree-of-Freedom Acoustic Impedances of Low-Frequency Electroacoustic Absorbers for Room Modal Equalisation

Hervé Lissek, Etienne Thierry Jean-Luc Rivet, Sami Driss Karkar

Low-frequency electroacoustic absorbers have recently been developed as a solution for the modal equalisation. Firstly investigated in waveguides, the technique consists in matching the acoustic impedance at a closed-box loudspeaker diaphragm to the charac ...

2017

Phase Corrected H-Plane Horn Antenna in Gap SIW Technology

Juan Ramon Mosig, Marc Esquius Morote, Lei Wang

This communication introduces a modified substrate integrated waveguide (SIW), the gap SIW, and deduces an approximate closed-form expression for calculating its effective width, taking into account the fringing and coupling fields around the gap. As an im ...

Ieee-Inst Electrical Electronics Engineers Inc2017

Stability Considerations for Variable Impedance Control

Aude Billard, Klas Jonas Alfred Kronander

Impedance control is a commonly used control architecture for robotic manipulation. For increased flexibility, the impedance can be programmed to vary during the task. This has important implications on the stability properties of the control system, which ...

Ieee-Inst Electrical Electronics Engineers Inc2016