Guido HaefeliEnseignement et PhD Doctorant·es actuel·les Federico Ronchetti, Gauri Napoletano A co-dirigé les thèses EPFL de Axel Kuonen, Olivier Göran Girard, Carina Trippl Cours Particle detection PHYS-440 Introduction des différentes interactions des particules dans la matière. Différentes techniques de détection comme scintillateurs, détecteurs à gas, silicium, et détecteurs pour identification de particules.
Olivier SchneiderAprès une thèse en physique des particules à l'Université de Lausanne, soutenue en 1989, Olivier Schneider rejoint le LBL, Lawrence Berkeley Laboratory (Californie), pour travailler sur l'expérience CDF au Tevatron de Fermilab (Illinois), d'abord au bénéfice d'une bourse de chercher débutant du Fonds National Suisse pour la Recherche Scientifique, puis comme post-doc au LBL. Il participe à la construction et à la mise en service du premier détecteur de vertex au silicium fontionnant avec succès auprès d'un collisionneur hadronique, détecteur qui a permis la découverte du sixième quark, appelé "top". Dès 1994, il revient en Europe et participe à l'expérience ALEPH au grand collisionneur électron-positon du CERN (Genève), comme boursier puis comme titulaire d'un poste de chercheur au CERN. Il se spécialise en physique des saveurs lourdes. En 1998, il est nommé professeur associé à l'Université de Lausanne, puis professeur extraordinaire à l'EPFL en 2003, et enfin professeur ordinaire à l'EPFL en 2010. Ayant participé depuis 1997 à la préparation de l'expérience LHCb au collisionneur LHC du CERN, entrée en fonction à fin 2009, il en analyse maintenant les données. Il contribue aussi depuis 2001 à l'exploitation des données enregistrées par l'expérience Belle au laboratoire KEK (Tsukuba, Japon). Ces deux expériences étudient principalement les désintégrations de hadrons contenant un quark b, ainsi que la violation de CP, c'est-à-dire le non-respect de la symétrie entre matière et antimatière.
Véronique MichaudBackground: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France) Activités: Depuis Janvier 2018: Vice-Doyenne de la faculté des ingénieurs, en charge de l'éducation. Juin 2012-Dec.2017: Directrice de la Section Science et Génie des Matériaux Depuis Avril 2017, Professeur Associée EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009 : collaboratrice Scientifique EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Environ 300 publications of which 140 in peer-reviewed journals
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Nadine BalucEnseignement et PhD A dirigé les thèses EPFL de Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Marianne LiebiEnseignement et PhD Doctorant·es actuel·les Atreyee Acharya, Dominique Olivier Windisch, Sici Wang, Torne Tänzer, Else Linnea Rensmo, Carolina Gutierrez Bolaños Cours Material science at large scale facilities MSE-435 Ce cours donne une introduction à la recherche sur les matériaux utilisant les rayons X et les neutrons. Après une introduction aux grands instruments de recherche, nous plongerons dans les différentes méthodes, y compris des exemples d'application dans divers domaines de la
Cécile HébertCécile Hébert est née en France, en 1970. Elle a obtenu son diplôme d'ingénieure (option physique) puis son doctorat ("Etude d'un nouveau filtre d'énergie des électrons pour le microscope électronique à transmission") à l'Ecole centrale de Paris. Doctorante dans le laboratoire du professeur Jouffrey, elle a créé un nouveau filtre d'énergie des électrons, pour le microscope électronique à transmission, qui a été breveté par le CNRS.
En tant que post-doctorante dans le laboratoire du professeur Schattschneider, elle a mené à bien une étude marquante sur la simulation des structures fines des seuils de perte d'énergie des électrons en comparaison avec l'expérience. En 2005, elle a été l'une des actrices principales dans l'élaboration du projet européen CHIRALTEM visant à développer dans le microscope électronique à transmission une méthode similaire à la méthode XMCD (X Ray Magnetic Circular Dichroism) connue en spectrométrie d'absorption des rayons X.
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
Esther AmstadEnseignement et PhD Doctorant·es actuel·les Reece Carolann Whatmore, Marc Elies Grädel, François Raphaël Rivat, Rocio Garcia Montero, Robin Michel Studer, Brian David Ridenour, Harsha Koganti, Zoubeir Saraw, Louisa Rinaldi, Greta Cocchi, Gaia Dupont A dirigé les thèses EPFL de Antoine Claude Jean Vian, Huachuan Du, Gianluca Etienne, Mathias Steinacher, Efe Armagan, Alvaro Lino Boris Charlet, Michael David Kessler, Aysu Ceren Okur, Matteo Hirsch, Chuen-Ru Li, Pauline Camille Charlotte Pradal, Gaia De Angel
Vivek SubramanianEnseignement et PhD Doctorant·es actuel·les Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar A dirigé les thèses EPFL de Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed A co-dirigé les thèses EPFL de Mohammad Jafarpour Cours Organic and printed electronics MICRO-505 Ce cours traite de la mise en œuvre des technologies de l'électronique organique et imprimée: les matériaux, les procédés d'impression
Jeremy Luterbacher
- Masters degree in Chemical Engineering obtained in 2007 at the Swiss Federal Institute of Technology, Lausanne (EPFL) (enrolled fall 2005, currently in 3rd semester). Relevant courses: Advanced Separation Processes, Advanced Chemical Reaction Engineering, Process Development and Polymer Chemistry and Macromolecular Engineering. - Bachelors degree in Chemistry and Chemical Engineering obtained in 2005 at the Swiss Federal Institute of Technology, Lausanne (EPFL). Relevant courses: Transport phenomena, Separation processes, Process command, Applied Energetics, Chemical Reaction Engineering, Chemical Kinetics, Quantum chemistry and Thermodynamics. - High school Maturity completed at the Nyon High School, 2002 (major subjects: biology-chemistry, advanced math, and Latin). Maturity essay completed 12-2001 with distinction - Secondary School certificate obtained in 1999 at the Gland secondary School, Latin-Greek section
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Enseignement et PhD Doctorant·es actuel·les Nicola Carrara, Berlind Vosberg, Maja Lopandic, Sneha Cheriyamparambil, Thanh Thi Hà Lê, Suqiu Jiang, Adam William Woodhouse, Kunita Numabe A dirigé les thèses EPFL de Stefano Tugulu, Markus Scholl, Harald Nuhn, Nadja Franz, Raphaël Barbey, Bojana Portmann, Maarten Danial, Dusko Paripovic, Sanhao Ji, Nicolas Bertrand Schüwer, Zuzana Kadlecova, Görçin Görkem Sahin Kurtuldu, Caroline Sugnaux, Sole
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Pascal Alexander SchouwinkEnseignement et PhD Cours Advanced Solid State and Surface Characterization CH-633 Principles and Applications of X-ray Diffraction CH-632
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 