Guido HaefeliTeaching & PhD PhD Students Federico Ronchetti, Gauri Napoletano Past EPFL PhD Students as codirector Axel Kuonen, Olivier Göran Girard, Carina Trippl Courses Particle detection PHYS-440 The course will cover the physics of particle detectors. It will introduce the experimental techniques used in nuclear and particle physics. The lecture includes the interaction of particles with matter, scintillators, gas detectors, silicon detectors, detectors for particle ID and photo-detectors.
Olivier SchneiderAfter his thesis defense in particle physics in 1989 at University of Lausanne, Olivier Schneider joins LBL, the Lawrence Berkeley Laboratory (California), to work on the CDF experiment at the Tevatron in Fermilab (Illinois), first as a research fellow supported by the Swiss National Science Foundation, and later as a post-doc at LBL. He participates in the construction and commissioning of the first silicon vertex detector to operate successfully at a hadron collider; this detector enabled the discovery of the sixth quark, named "top". Since 1994, he comes back to Europe and participates in the ALEPH experiment at CERN's Large Electron-Positron Collider, as CERN fellow and then as CERN scientific staff. He specializes in heavy flavour physics. In 1998, he becomes associate professor at University of Lausanne, then extraordinary professor at the Swiss Institute of Technology Lausanne (EPFL) in 2003, and finally full professor at EPFL in 2010. Having worked since 1997 on the preparation of the LHCb experiment at CERN's Large Hadron Collider, which started operation in 2009, he is now analyzing the first data. He also contributes since 2001 to the exploitation of the data recorded at the Belle experiment (KEK laboratory, Tsukuba, Japan). These two experiments study mainly the decays of hadrons containing a b quark, as well CP violation, i.e. the non-invariance under the symmetry between matter and antimatter.
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Marianne LiebiMarianne Liebi is Tenure-Track Assistant Professor at EPF Lausanne and head of the Laboratory for X-ray characterization of materials (cam-X) and the group “
Structure and Mechanics of Advanced Materials
” at PSI. She has been appointed in 2021 at EPFL where she is part of the Institute of Materials within the School of Engineering. Marianne Liebi studied Food Science at ETH Zurich where she also obtained her PhD in 2013 in the Laboratory of Food Process Engineering lead by Prof. Erich J. Windhab. Within this project started using small-angle neutron scattering at PSI for the characterization of soft-matter, namely of magnetic alignable self-assembly structures. As a Postdoc in the coherent X-ray scattering group at the Swiss Light Source she worked from 2013-2016 on method development in SAXS tensor tomography. In 2016 she moved to Sweden where after a short period at the NanoMAX beamline, MAXIV Laboratory, Lund she started her own research group in 2017 as Assistant Professor at the Chalmers University of Technology, Gothenburg, and became Docent in Physics in spring 2020. She kept her affiliation at Chalmers University of Technology, where still part of her group is located (
Liebi research group
) when moving back to Switzerland in 2020 where she was Scientific Group Leader in the Center for X-ray Analytics at Empa, St.Gallen, before starting the joint position between EPFL and PSI in November 2021.
Cécile HébertCécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris.
As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.
Arnaud BertschTeaching & PhD PhD Students Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo Past EPFL PhD Students as codirector Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Courses Advanced microfabrication practicals MICRO-373 This TP allows for in-depth training on advanced micro and nanofabrication methods in a clean-room environment for selected applications, gain deeper knowledge in MEMS/NEMS processes, work in a small group together with PhD stude
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Jeremy LuterbacherExpertise
Biomass conversion Heterogeneous catalysis
See: https://www.epfl.ch/labs/lpdc/luterbacher/ Education Postdoc | Chemical Engineering 2014 – 2014 Univsersity of Wisconsin-Madison PhD | Chemical Engineering 2012 – 2012 Cornell University Master | Chemical Engineering 2010 – 2010 Cornell University Master | Chemical Engineering 2007 – 2007 �cole Polytechnique F�d�rale de Lausanne Bachelor | Chemistry and Ch Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Pascal Alexander SchouwinkTeaching & PhD Courses Advanced Solid State and Surface Characterization CH-633 State-of-the-art surface/thin film characterization methods of polycrystalline/nano/amorphous materials. Selected topics from X-ray scattering (SAXS/GISAXS, PDF, GIWAXS, HRXRD), electronic and optical spectroscopy (XPS, AES, SERS, TERS), scanning probe and electron microscopy (STM, AFM, HRTEM, SEM). Principles and Applications of X-ray Diffraction CH-632 Basic theoretical aspects of Crystallograph
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 