Publication

Structural Characterization of Traditional Moment-Resisting Timber Joinery

Related publications (23)

Reusability Assessment of Obsolete Reinforced Concrete Structural Components

Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes, Corentin Jean Dominique Fivet

The production of concrete, the most widely used construction material, detrimentally affects the environment. Obsolete reinforced concrete (RC) load-bearing structures, even when still in good condition, are today prematurely crushed and landfilled or rec ...

Springer2023

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

Nicolas Henry Pierre Louis Rogeau

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023

From Marshall Plan to “Hilton in the wild”: The Transnational History of a Cooperative Housing Block in Esat, Ankara

Sila Karatas

This paper concerns the planning, design, and construction history of a postwar multifamily housing block in Ankara, Turkey, viewed from the perspective of the transnational and local networks behind its realization. Built by the Mintrak Building Cooperati ...

2022

A Collaborative Workflow to Automate the Design, Analysis, and Construction of Integrally-Attached Timber Plate Structures

Pierre Latteur, Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper introduces a computational framework that fosters collaboration between architects, engineers, and contractors by bridging the gap between architectural design, structural analysis, and digital construction. The present research is oriented towa ...

CAADRIA2022

Case-Study on the Creep Behavior of Interconnected Timber Elements using Wood-Wood Connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet, Martin Thomas Nakad

With the increasing use of automation and computer-aided manufacturing in timber construction, a standardized timber construction system using digitally produced wood-wood connections has recently been developed for basic building components. Its structura ...

EPFL2021

Structural design methodology in Integrally-Attached Timber Plate structures

Aryan Rezaei Rad, Petras Vestartas

The immediate application of research discoveries requires a global and exact understanding of the structure under consideration. To gain insight into the complex behavior of structures, numerical simulations are carried out in parallel to physical experim ...

Routledge, Taylor & Francis Group2021

Upcycling Space Structures (Preface to special issue)

Olivier Baverel, Corentin Jean Dominique Fivet

The construction industry’s contribution to the deterioration of Earth’s ecosystem is huge. 11% of all anthropic greenhouse gas emissions worldwide are due to the construction, demolition, and transformation of buildings and infrastructure. Construction an ...

2021

Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections

Julien Gamerro

Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...

EPFL2020

Experimental investigations on the load-carrying capacity of digitally produced wood-wood connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

The rise of digital fabrication has increased the use of wood-wood connections inspired by traditional carpentry in modern timber constructions. With recent developments on standard construction systems, the mechanical behavior of such joints for in-plane ...

2020

Exploration of spatial structures made from reused elements and the design of optimal kits-of-parts

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Gennaro Senatore

Reuse reduces raw material use, waste generation and energy consumption caused by building construction. A substantial share of these impacts is contributed by load-bearing systems be-cause of their mass- and energy-intensive production process. Therefore, ...

Taylor & Francis Group2019

Design of Truss Structures Through Reuse

Joseph Jean François Desruelle, Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Gennaro Senatore

This paper presents structural optimization techniques to design truss structures that make best use of a given stock of structural components. Still little explored, the reuse of structural components over multiple service lives has the potential to signi ...

2019

Reconsidering traditional timber joinery for sustainable structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting

Timber construction plays an important role in architectural history, in modern construction methods and in sustainable design, for which wood-only joinery techniques have been used for centuries. Traditional joinery typologies are the product of successiv ...

2018

Overpass bridge of the L3378 road near Fulda-Lehnerz First application of UHPFRC in road bridge construction in Germany. Part 1

Eugen Brühwiler

Aging bridges of the German federal road network often cannot be rehabilitated or replaced timely due to insufficient funding and complex regulations of building laws. Consequently, novel building materials and alternative solutions get the opportunity to ...

2018

Experimental investigation of the influence of integral mechanical attachments on structural behaviour of timber folded surface structures

Yves Weinand, Christopher Werner Matthias Robeller, Andrea Stitic

Structural behaviour of timber folded surface systems greatly depends on the connections ability to transfer the occurring forces between the adjacent elements and finally to the supports. This paper focuses on multiple tab-and-slot joints (MTSJ), where di ...

2018

A Modular Timber Construction System for the Sustainable Vertical Extension of Office Buildings

Emmanuel Rey, Sophie Lufkin, Aleksis Dind

Most European cities are facing urban densification issues. In this context, a solution to create usable spaces without additional pressure on land consists in the vertical extension of existing buildings. Given their abundance in the building stock, terti ...

2018

Optimum Truss Design with Reused Stock Elements

Joseph Jean François Desruelle, Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Gennaro Senatore

This paper proposes the application of optimization techniques to design reticular structures made from a stock of reused elements. Still little explored, the reuse of structural components over multiple service lives has the potential to reduce the enviro ...

2018

Integrally attached timber folded surface structures : geometrical, experimental and numerical study

Andrea Stitic

In structural engineering, folded surface structures present one of the concepts for construction of self supporting column free systems. They utilize structural benefits of folding to achieve material saving and improve structural efficiency. The folding ...

EPFL2017

Brevets de la maison en béton, 1892-1923 : visions d'une construction monolithique, d'Edison à Le Corbusier

Gia Bao Khue Aurélie Do-Tran

Looking back at the history of concrete houses around 1900, we can discover how reinforced concrete, initially tied to construction systems of renowned inventors (and other less known), is gradually becoming autonomous and a material on its own, highlighte ...

EPFL2017

Ensayos cuasi-estáticos cíclicos de muros delgados de concreto reforzado en edificios colombianos

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

The use of thin reinforced concrete walls (thickness of 8 to 12 cm) in Latin America has become a popular building construction practice in the last two decades. Several existing studies indicate that the inelastic deformation capacity could be limited and ...

2017

Long-term design of FRP-PUR web-core sandwich structures in building construction

Julia De Castro San Roman Fest, Thomas Keller, Sonia Yanes Armas

The structural behavior of GFRP-polyurethane (PUR) web-core sandwich structures subjected to sustained loading was investigated. As a basis, a study of the mechanical behavior of rigid PUR foams used as core materials was conducted, with emphasis on creep. ...

Elsevier2017