Bio-Inspired Fluorine-Free Self-Cleaning Polymer Coatings

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The nonlinear decay of oscillations of a liquid column in a U-shaped tube is investigated within the theoretical framework of the projection method formalized by Bongarzone et al. [Chaos 31, 123124 (2021)]. Starting from the full hydrodynamic system supple ...

In the last twenty years, a number of studies have been dedicated to the development of thin ceramic coating for the electrical insulation of Ag-sheathed Bi-2212 wires. Instead of preparing a coating by mixing different compounds in house, this technical n ...

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

Supramolecular self-assembly in water based on non-covalent bonding is attracting major attention due to the potential of hydrogels and aqueous polymers in biomedical applications. Although supramolecular polymerization in organic solvents is well establis ...

The influence of post-heat treatment on the microstructure and properties of 4D printed Fe-17Mn-5Si-10Cr-4Ni (wt. %) shape memory alloy (SMA) produced via a laser powder bed fusion process is investigated in this study. It is shown that heat-treatment temp ...

Understanding hierarchical self-assembly of biological structures requires real time measurement of the self-assembly process over a broad range of length- and timescales. The success of high-speed atomic force microscopy (HS-AFM) in imaging small scale mo ...

Gravity force, surface tension, oscillating boundary layers, viscous dissipation, static meniscus, contact angle hysteresis, and moving contact lines are typical features of sloshing dynamics. All these ingredients influence capillary-gravity waves in a co ...

Selective area epitaxy constitutes a mainstream method to obtain reproducible nanomaterials. As a counterpart, self-assembly allows their growth without costly substrate preparation, with the drawback of uncontrolled positioning. We propose a mixed approac ...

The reaction of cis-blocked, square-planar MII complexes with tetratopic N-donor ligands is known to give metallasupramolecular assemblies of the formula M2nLn. These assemblies typically adopt barrel-like structures, with the ligands paneling the sides of ...

The hydrophobic-water interface plays a key role in biological interactions. However, both the hydrophobic-water interfacial molecular structure and the origin of the negative zeta potential of hydrophobic droplets in water are heavily contested. We report ...

A facile in situ and UV printing process was demonstrated to create self-cleaning synthetic replica of natural petals and leaves. The process relied on the spontaneous migration of a fluorinated acrylate surfactant (PFUA) within a low-shrinkage acrylated h ...

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

At the interface with solids, the mobility of liquid molecules tends to be reduced compared with bulk, often resulting in increased local order due to interactions with the surface of the solid. At room temperature, liquids such as water and methanol can f ...

Fabrication of wear-resistant omniphobic surfaces is a persistent scientific challenge and essential for various applications such as in paint industries, fluid transport, antifouling, reduction of friction drag on ship hulls, and stain resistant textiles. ...

Adsorption of calf serum organic matter from a phosphate-buffered solution was studied using the electrochemical quartz crystal microbalance with additional dissipation measurements. Two types of crystal surfaces were used: one rough with micrometer-range ...

We present a mechanism for a generic, powerful force of assembly and mobility for transmembrane proteins in lipid bilayers. This force is a pre-transition (or pre-melting) effect for the first-order transition between ordered and disordered phases in the m ...

When two solids start rubbing together, frictional sliding initiates in the wake of slip fronts propagating along their surfaces in contact. This macroscopic rupture dynamics can be successfully mapped on the elastodynamics of a moving shear crack. However ...

Conjugated polymers and small molecules are a promising class of semiconducting materials for application in macroelectronic and energy conversion devices. The development of high performance devices employing this class of semicrystalline materials ultima ...

Protein-polymer conjugates are a class of molecules that combine the stability of polymers with the diversity, specificity, and functionality of biomolecules. These bioconjugates can result in hybrid materials that display properties not found in their ind ...

Bio-Inspired Fluorine-Free Self-Cleaning Polymer Coatings

Chat with Graph Search

Stick-slip-to-stick transition of liquid oscillations in a U-shaped tube

Examination of commercial ceramic coatings for the electrical insulation of Bi-2212 wire

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Mechanistic Insight into Supramolecular Polymerization in Water Tunable by Molecular Geometry

Effect of post-heat treatment conditions on shape memory property in 4D printed Fe-17Mn-5Si-10Cr-4Ni shape memory alloy

Large‐Range HS‐AFM Imaging of DNA Self‐Assembly through In Situ Data‐Driven Control

Theoretical framework to analyze the combined effect of surface tension and viscosity on the damping rate of sloshing waves

Simultaneous Selective Area Growth of Wurtzite and Zincblende Self-Catalyzed GaAs Nanowires on Silicon

The Intricate Structural Chemistry of MII2nLn-Type Assemblies

Charge transfer across C-H center dot center dot center dot O hydrogen bonds stabilizes oil droplets in water

A Facile in Situ and UV Printing Process for Bioinspired Self-Cleaning Surfaces

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Nanopillars Enabling III-V Integration on Si (100) and (111)

Thermally-nucleated self-assembly of water and alcohol into stable structures at hydrophobic interfaces

Self-Replenishing, Wear-Resistant and Anti-Sticking Surfaces Based on Liquid Impregnation of Microstructured Mesoporous α-AI₂O₃ [Alpha Alumina] Matrices

Adsorption of organic matter on titanium surfaces with nano- and micro-scale roughness studied with the electrochemical quartz crystal microbalance dissipation technique

Pre-transition effects mediate forces of assembly between transmembrane proteins

Onset of sliding across scales: How the contact topography impacts frictional strength

Tailoring self-assembly and optoelectronic properties of organic semiconductors via macromolecular engineering

Self-assembly of protein-polymer conjugates for drug delivery