Fabrication and test of implantable thin-film electrodes for stimulation and recording of biological signals

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The present invention concerns a bodily implantable or probe device and microelectrode fabrication method comprising providing at least one silicon substrate including an electronic device or unit; providing, on a first side of the silicon substrate, at le ...

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

This thesis presents an extensive exploration of neuroelectronic interfaces, focusing on microfabrication, in silico modeling, and their applications in designing and fabricating devices for neural interfacing. The research encompasses both peripheral nerv ...

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

Fast and uniform ion transport within the solid electrolyte interphase (SEI) is considered a crucial factor for ensuring the long-term stability of metal electrodes. In this study, we present the fabrication of ultrathin artificial interphases consisting o ...

Over the last decades, implantable neural interfaces have been extensively explored and effectively deployed to address neurological and mental health disorders. The existing solutions present several limitations. Firstly, the physical size of the implanta ...

Tantalum is receiving increasing attention in the biomedical field due to its biocompatible nature and superior mechanical properties. However, the bioinert nature of tantalum still poses a challenge and limits its integration into the bone tissue. To addr ...

Continuous dendrites growth, as well as corrosion and side reactions of Zn metal anode seriously hinder the development of aqueous zinc ion batteries. To address these issues, oleic acid (OA) is dispersed into a 2 M ZnSO4 solution to form a novel colloidal ...

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

Spinal Cord Injury (SCI) affects almost 500,000 people every year, causing complete paralysis of both legs in severe cases, with no current treatment perspective. However, new neuroengineering technologies, such as the Brain Spine Interface (BSI), have eme ...

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoco ...

A closed-loop neuromodulation system, including an electrode array that is implantable to a brain of a subject, analog front-end device (AFD) for selectively selecting and reading a plurality of channels from electrode array, a finite impulse response (FIR ...

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

High-temperature compatible passivating contacts based on phosphorus doped polysilicon (poly-Si(n)) on a thin silicon oxide, employed on the rear side of bifacial n-PERT like solar cells provide an efficiency increase while being compatible with current ph ...

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting ...

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

Recently, flexible and soft bioelectronic interfaces have been proposed as a solution to improve existing neural interfaces that currently present mechanical mismatch with the soft tissue. These are devices fabricated with thin polymeric or elastomeric bac ...

Titanium dioxide of bronze phase (TiO2(B)) has attracted considerable attention as a promising alternative lithium/sodium-ion battery anode due to its excellent operation safety, good reversible capacity, and environmental friendliness. However, several in ...

Fabrication and test of implantable thin-film electrodes for stimulation and recording of biological signals

Chat with Graph Search

Bodily implant microelectrode and bodily implant microelectrode fabrication method

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Modeling, fabrication and validation of 3D neural interfaces for peripheral nerves and brain organoids

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Pure Amorphous and Ultrathin Phosphate Layer with Superior Ionic Conduction for Zinc Anode Protection

Miniaturised, Wireless and Distributed Neural Interface Toward Cortical Visual Prosthesis

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

A colloidal aqueous electrolyte modulated by oleic acid for durable zinc metal anode

Additive and digital manufacturing of transient sensors and bioelectronics

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Brain-controlled spinal cord stimulation to restore mobility after spinal cord injury

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches

A multichannel versatile brain activity classification and closed loop neuromodulation system, device and method using a highly multiplexed mixed-signal front-end

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

22.8% full-area bifacial n-PERT solar cells with rear side sputtered poly-Si (n) passivating contact

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Conformable neural interfaces : from engineering stretchability at the micro-scale to translational applications

Bronze-Phase TiO2 as Anode Materials in Lithium and Sodium-Ion Batteries