Publications related to Dimensional stability analysis of a UV printed polymer microstructure for a novel glazing system

Related publications (22)

Stable cones in the thin one-phase problem

The aim of this work is to study homogeneous stable solutions to the thin (or fractional) one -phase free boundary problem. The problem of classifying stable (or minimal) homogeneous solutions in dimensions n >= 3 is completely open. In this context, axial ...

Johns Hopkins Univ Press2024

Reactive collision-free motion generation in joint space via dynamical systems and sampling-based MPC

Aude Billard, Nadia Barbara Figueroa Fernandez, Mikhail Koptev

Dynamical system (DS) based motion planning offers collision-free motion, with closed-loop reactivity thanks to their analytical expression. It ensures that obstacles are not penetrated by reshaping a nominal DS through matrix modulation, which is construc ...

Sage Publications Ltd2024

Benchmarking machine-readable vectors of chemical reactions on computed activation barriers

Anne-Clémence Corminboeuf, Puck Elisabeth van Gerwen, Ksenia Briling, Yannick Calvino Alonso

In recent years, there has been a surge of interest in predicting computed activation barriers, to enable the acceleration of the automated exploration of reaction networks. Consequently, various predictive approaches have emerged, ranging from graph-based ...

Royal Soc Chemistry2024

Fusing Pre-existing Knowledge and Machine Learning for Enhanced Building Thermal Modeling and Control

Loris Di Natale

Buildings play a pivotal role in the ongoing worldwide energy transition, accounting for 30% of the global energy consumption. With traditional engineering solutions reaching their limits to tackle such large-scale problems, data-driven methods and Machine ...

EPFL2024

Instability and trajectories of buoyancy-driven annular disks: A numerical study

François Gallaire, Pier Giuseppe Ledda

We investigate the stability of the steady vertical path and the emerging trajectories of a buoyancy -driven annular disk as the diameter of its central hole is varied. The steady and axisymmetric wake associated with the steady vertical path of the disk, ...

Amer Physical Soc2024

Frustrated magnets in the limit of infinite dimensions: Dynamics and disorder-free glass transition

Achille Mauri

We study the statistical mechanics and the equilibrium dynamics of a system of classical Heisenberg spins with frustrated interactions on a d -dimensional simple hypercubic lattice, in the limit of infinite dimensionality d -> infinity . In the analysis we ...

Amer Physical Soc2024

Learning the intrinsic dynamics of spatio-temporal processes through Latent Dynamics Networks

Alfio Quarteroni, Francesco Regazzoni, Stefano Pagani

Predicting the evolution of systems with spatio-temporal dynamics in response to external stimuli is essential for scientific progress. Traditional equations-based approaches leverage first principles through the numerical approximation of differential equ ...

Nature Portfolio2024

Transparent structured conductive coating for applications in smart windows

Jérémy Jacques Antonin Fleury

Solar radiation reaching the surface of the earth for a period of one hour contains more energy than that consumed by mankind over an entire year. Some of this solar energy is already collected by photovoltaic cells to cover the electricity needs of buildi ...

EPFL2023

One-Dimensional "Ghost Imaging" in Electron Microscopy of Inelastically Scattered Electrons

Fabrizio Carbone, Ivan Madan, Giovanni Maria Vanacore, Simone Gargiulo

Entanglement and correlation are at the basis of quantummechanicsand have been used in optics to create a framework for "ghostimaging". We propose that a similar scheme can be used in anelectron microscope to exploit the correlation of electrons with theco ...

2023

Taking a step back from glass towers facades to make them compatible with the 2050 targets

Sergi Aguacil Moreno, Bernard Paule

Skyscrapers or glass towers are an extremely common model throughout the world. In the current context of climate change and resource depletion, we need to develop new postures towards these objects, especially for existing buildings that are becoming obso ...

2023

Tuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo-Optical Properties

Stephen William Wasilewski

Facades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large-scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricatin ...

Wiley2023

Nonlinear dynamics and Kerr frequency comb formation in lattices of coupled microresonators

Tobias Kippenberg, Alexey Tikan, Aleksandr Tusnin

Recently, substantial progress has been made in the understanding of microresonators frequency combs based on dissipative Kerr solitons (DKSs). However, most of the studies have focused on the single-resonator level. Coupled resonator systems can open new ...

Nature Portfolio2023

Well-posedness Issues For the Half-Wave Maps Equation With Hyperbolic And Spherical Targets

Yang Liu

This thesis is a study of the global well-posedness of the Cauchy problems for half-wave maps from the Minkowski space of dimension n+1 to the 2-dimensional sphere and the hyperbolic plane. The work is mainly based on the results from Krieger-Sire 17' in ...

EPFL2023

Infrared-active phonons in one-dimensional materials and their spectroscopic signatures

Nicola Marzari, Thibault Daniel Pierre Sohier, Norma Rivano

Dimensionality provides a clear fingerprint on the dispersion of infrared-active, polar-optical phonons. For these phonons, the local dipoles parametrized by the Born effective charges drive the LO-TO splitting of bulk materials; this splitting actually br ...

Nature Portfolio2023

From thin plates to Ahmed bodies: linear and weakly nonlinear stability of rectangular prisms

Edouard Boujo, Giuseppe Antonio Zampogna

We study the stability of laminar wakes past three-dimensional rectangular prisms. The width-to-height ratio is set to W/H = 1.2, while the length-to-height ratio 1/6 < L/H < 3 covers a wide range of geometries from thin plates to elongated Ahmed bodies. F ...

Cambridge University Press2023

Discomfort glare from daylight: Influence of transmitted color and the eye's macular pigment

Sneha Jain

Designing architectural façades that allow sufficient daylight to create visually comfortable and pleasant environments is a challenging aspect of building design. It requires accounting for visual comfort and discomfort glare risks and understanding the f ...

EPFL2023

Emergent non-Hermitian localization phenomena in the synthetic space of zero-dimensional bosonic systems

Fabrizio Minganti

Phase transitions in non-Hermitian systems are at the focus of cutting edge theoretical and experimental research. On the one hand, parity-time- (PT-) and anti-PT-symmetric physics have gained ever-growing interest, due to the existence of non-Hermitian sp ...

AMER PHYSICAL SOC2023

Human sitting behavior at office work and its effect on metabolic rate under varying thermal exposure

Ryan Liao, Dolaana Khovalyg

Assessing and optimizing human indoor comfort is challenging as physiological, psychological, and environmental variables influence it. Therefore, it is crucial to understand variability of human physiological parameters and underlying mechanisms. Metaboli ...

2023

Thermal Conditions in Indoor Environments: Exploring the Reasoning behind Standard-Based Recommendations

Dolaana Khovalyg, Sarah Wael Ahmed Crosby

Professionals in the building design and operation fields typically look at standards and guidelines as a reliable source of information and guidance with regard to procedural, contractual, and legal scope and requirements that are relevant to accountabili ...

2023

Twisting instabilities in elastic ribbons with inhomogeneous pre-stress: A macroscopic analog of thermodynamic phase transition

Pedro Miguel Nunes Pereira de Almeida Reis, Michael Christopher Gomez

We study elastic ribbons subject to large, tensile pre-stress confined to a central region within the cross-section. These ribbons can buckle spontaneously to form helical shapes, featuring regions of alternating chirality (phases) that are separated by so ...

PERGAMON-ELSEVIER SCIENCE LTD2023