Publications related to Advanced receiver algorithms for MIMO wireless communications

Related publications (30)

Bodily implant microelectrode and bodily implant microelectrode fabrication method

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

The present invention concerns a bodily implantable or probe device and microelectrode fabrication method comprising providing at least one silicon substrate including an electronic device or unit; providing, on a first side of the silicon substrate, at le ...

2024

A Generalized Adjusted Min-Sum Decoder for 5G LDPC Codes: Algorithm and Implementation

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Yifei Shen, Yuqing Ren, Hassan Harb

5G New Radio (NR) has stringent demands on both performance and complexity for the design of low-density parity-check (LDPC) decoding algorithms and corresponding VLSI implementations. Furthermore, decoders must fully support the wide range of all 5G NR bl ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

High-Throughput and Flexible Belief Propagation List Decoder for Polar Codes

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Yifei Shen, Yuqing Ren, Andreas Toftegaard Kristensen, Leyu Zhang

Due to its high parallelism, belief propagation (BP)decoding is amenable to high-throughput applications and thusrepresents a promising solution for the ultra-high peak datarate required by future communication systems. To bridge theperformance gap compare ...

Ieee-Inst Electrical Electronics Engineers Inc2024

A Back-Illuminated SPAD Fabricated With 40 nm CMOS Image Sensor Technology Achieving Near 40% PDP at 940 nm

Won Yong Ha

This article introduces a back-illuminated (BI) single-photon avalanche diode (SPAD) based on 40 nm CMOS image sensor (CIS) technology which is the most advanced technology node for the fabrication of a SPAD up to date. It's based on a P-well (PW) and deep ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Low Power LDPC Decoding by Reliable Voltage Down-Scaling

Andreas Peter Burg

Low-Density Parity-Check (LDPC) decoder is among the power hungry building blocks of wireless communication systems. Voltage scaling down to Near-Threshold (NT) voltages substantially improves energy efficiency, in theory up 10x. However, tuning the voltag ...

IEEE2023

Investigation and Mitigation of Moisture- and Potential-Induced Degradation Mechanisms of Silicon Heterojunction Solar Cells and Modules

Olatz Arriaga Arruti

Photovoltaic (PV) technology is one of the most promising renewable energy sources. The PV market is dominated by crystalline silicon (c-Si) based technologies, thus ensuring their long-term performance is of paramount importance for manufacturers, investo ...

EPFL2023

Performance and degradation in silicon PV systems under outdoor conditions in relation to reliability aspects of silicon PV modules - Summary of results of COST Action PEARL PV

Andrew Wayne Fairbrother, David Moser

This paper presents the main results of COST Action PEARL PV, aiming at finding connections between the observed performance of monitored PV systems and degradation causes and failure modes according to literature with a focus on the most dominant technolo ...

IEEE2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Vapor Deposition of Perovskite Solar Cells

Quentin Jean-Marie Armand Guesnay

Thanks to the continuous improvement of crystalline silicon (c-Si) solar cells, largely dominating the market, photovoltaic electricity is nowadays the cheapest source of energy on the market. Yet, solar energy is far from being completely harvested, as t ...

EPFL2023

Rear textured p-type high temperature passivating contacts and their implementation in perovskite/silicon tandem cells

Christophe Ballif, Sylvain Nicolay, Quentin Thomas Jeangros, Antoine Descoeudres, Soo-Jin Moon, Andrea Ingenito, Philippe Wyss, Arnaud Walter

Silicon solar cells based on high temperature passivating contacts are becoming mainstream in the photovoltaic industry. Here, we developed a high-quality boron-doped poly-silicon hole contact. When combined with a co-processed phosphorus-doped poly-silico ...

Royal Soc Chemistry2023

Status and perspectives of crystalline silicon photovoltaics in research and industry

Christophe Ballif, Franz-Josef Haug, Mathieu Gérard Boccard

Crystalline silicon (c-Si) photovoltaics has long been considered energy intensive and costly. Over the past decades, spectacular improvements along the manufacturing chain have made c-Si a low-cost source of electricity that can no longer be ignored. Over ...

2022

SiNx and AlOx Nanolayers in Hole Selective Passivating Contacts for High Efficiency Silicon Solar Cells

Audrey Marie Isabelle Morisset

The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiNx and AlOx nanolayers as promising interface dielectrics to enable high efficiency ho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Carrier-selective contacts using metal compounds for crystalline silicon solar cells

Mathieu Gérard Boccard, Julie Amandine Dreon

Solar cells rely on the efficient generation of electrons and holes and the subsequent collection of these photoexcited charge carriers at spatially separated electrodes. High wafer quality is now commonplace for crystalline silicon (c-Si) based solar cell ...

WILEY2023

Secret Key Generation Using Short Blocklength Polar Coding Over Wireless Channels

Yanina Yurina Shkel

This paper investigates the problem of secret key generation from correlated Gaussian random variables in the short blocklength regime. Short blocklengths are commonly employed in massively connected IoT sensor networks in 5G and beyond wireless systems. P ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Material Development for Perovskite/Silicon Tandem Photovoltaics

Peter Joseph Fiala

The developed world is built on the fact that energy is readily available and functionally infinite. The electricity from the wall, the gas at the station, and the heat in our homes are reliable and low-cost. But this comfort is so far only possible throug ...

EPFL2022

Wireless neuromodulation with porous silicon

Silvestro Micera

Wireless optoelectronic devices are fabricated by controlling the porosity of p-type silicon, enabling in vivo efficient, non-genetic optoelectronic modulation of peripheral nerve activity. ...

NATURE PORTFOLIO2022

Monolithic Perovskite-Silicon Tandem Solar Cells: From the Lab to Fab?

Christophe Ballif, Quentin Thomas Jeangros, Antonin Faes, Chien-Jen Yang, Fan Fu

This review focuses on monolithic 2-terminal perovskite-silicon tandem solar cells and discusses key scientific and technological challenges to address in view of an industrial implementation of this technology. The authors start by examining the different ...

Wiley-V C H Verlag Gmbh2022

In Situ Reflectometry and Diffraction Investigation of the Multiscale Structure of p-Type Polysilicon Passivating Contacts for c-Si Solar Cells

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Audrey Marie Isabelle Morisset

The integration of passivating contacts based on a highly doped polycrystalline silicon (poly-Si) layer on top of a thin silicon oxide (SiOx) layer has been identified as the next step to further increase the conversion efficiency of current mainstream cry ...

AMER CHEMICAL SOC2022