Publications related to Gyrokinetic moment-based simulations of the Dimits shift

Related publications (40)

First measurements of velocity-space resolved intra-ELM fast-ion losses on the TCV tokamak

Ambrogio Fasoli, Basil Duval, Benoît Labit, Alexander Karpushov, Mario Ludovico Podesta, Jesús Poley Sanjuán, Umesh Kumar

Edge Localised Modes (ELMs) induced fast-ion losses have been characterised in the energy, E, and pitch, λ = v ∥ / v , space using a unique Fast Ion Loss Detector (FILD) on the tokamak à configuration variable. The FILD is equipped with a 128 Avalanche Pho ...

IOP Publishing Ltd2025

Effects of reflected electrons on the efficiency of high-power gyrotrons

Jean-Philippe Hogge, Jérémy Genoud

Efficiency is a key factor for high-power gyrotrons, particularly in future fusion power plants, where a large number of gyrotron units will be required for plasma heating. A single-stage depressed collector enhances efficiency from approximately 35% to 50 ...

2025

DC and quench performance assessment from the EUROfusion HTS Quench Experiment campaign and projection to magnet operation

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Nikolay Bykovskiy, Hugues Marie Alain Bajas, Jack Richard Greenwood

Seven different high current conductors for fusion applications, made of High Temperature Superconducting stacked tapes, have been successfully tested in the Quench Experiment campaign supported by EUROfusion and carried out in SULTAN. The aim of this exte ...

2025

Electromagnetic instability and turbulence in plasmas with positive and negative triangularity

Olivier Sauter, Justin Richard Ball, Matteo Vallar, Reinart Andreas J. Coosemans

While a number of studies exist comparing positive triangularity (PT) and negative triangularity (NT) δ, the nature of how the normalized electron pressure β affects microinstabilities and turbulence in fusion devices with substantial δ has not been studie ...

AIP Publishing2025

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Mengdi Kong

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

IOP Publishing Ltd2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Comprehensive Screening of Plasma-Facing Materials for Nuclear Fusion

Nicola Marzari, Paolo Ricci, Andrea Fedrigucci

Plasma-facing materials (PFMs) represent one of the most significant challenges for the design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the harshest material environment: intense bombardment of neutrons and plasma ...

2024

Full-F turbulent simulation in a linear plasma device using a gyro-moment approach

Paolo Ricci, Baptiste Jimmy Frei

Simulations of plasma turbulence in a linear plasma device configuration are presented. These simulations are based on a simplified version of the gyrokinetic (GK) model proposed by Frei et al. [J. Plasma Phys. 86, 905860205 (2020)], where the full-F distr ...

Aip Publishing2024

The dynamic genetic determinants of increased transcriptional divergence in spermatids

Christina Ernst

Cis-genetic effects are key determinants of transcriptional divergence in discrete tissues and cell types. However, how cis- and trans-effects act across continuous trajectories of cellular differentiation in vivo is poorly understood. Here, we quantify al ...

Nature Portfolio2024

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Mounir Driss Mensi, Masaud Hassan S Almalki, Anwar Qasem M Alanazi

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Elsevier2024

Numerical tools for burning plasmas

Laurent Villard, Jonathan Graves, Alberto Bottino, Ben McMillan, Emmanuel Lanti, Baruch Rofman

The software stack under development within a European coordinated effort on tools for burning plasma modelling is presented. The project is organised as a Task (TSVV Task 10) under the new E-TASC initiative (Litaudon et al 2022 Plasma Phys. Control. Fusio ...

IOP Publishing Ltd2023

Chemical Trend of Nonradiative Recombination in Cu(In,Ga)Se2 Alloys

Stefano Falletta

Nonradiative recombination in Cu(In,Ga)Se2 (CIGS) solar cells has long been attributed to the antisite defects MCu (M = In, Ga), but the underlying mechanism is still elusive. Using rigorous first-principles calculations, we demonstrate that the antisites ...

American Physical Society (APS)2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Downscaling of Historical Wind Fields over Switzerland Using Generative Adversarial Networks

Anthony Christopher Davison, Ophélia Mireille Anna Miralles

Near-surface wind is difficult to estimate using global numerical weather and climate models, because airflow is strongly modified by underlying topography, especially that of a country such as Switzerland. In this article, we use a statistical approach ba ...

2022

In Situ Reflectometry and Diffraction Investigation of the Multiscale Structure of p-Type Polysilicon Passivating Contacts for c-Si Solar Cells

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Audrey Marie Isabelle Morisset

The integration of passivating contacts based on a highly doped polycrystalline silicon (poly-Si) layer on top of a thin silicon oxide (SiOx) layer has been identified as the next step to further increase the conversion efficiency of current mainstream cry ...

AMER CHEMICAL SOC2022

The evolution of triphenylamine hole transport materials for efficient perovskite solar cells

Mohammad Khaja Nazeeruddin

In recent years, the dramatic increase in power conversion efficiency (PCE) coupled with a decrease in the total cost of third-generation solar cells has led to a significant increase in the collaborative research efforts of academic and industrial researc ...

Royal Society of Chemistry2022

Heat recovery potential from ventilated passive and active facades

Dolaana Khovalyg, Mohammad Rahiminejad

A ventilated air-space behind external claddings can potentially affect the thermal performance of the entire building structure. In particular, in the Building Integrated Photovoltaic (BIPV) facades, ventilated cavities are typically present between the P ...

TU Delft OPEN2022

Contact Design for Silicon Heterojunction Solar Cells

Luca Massimiliano Antognini

Today more than ever the world needs clean energy sources and thus a fast deployment and scaling up of the photovoltaic industry. In this context improving solar cell efficiency plays a major role. In order to achieve the maximum single junction efficiency ...

EPFL2022

Characterization and Development of Fired Passivating Contacts for Silicon Solar Cells

Mario Joe Lehmann

One of the key elements to improve mainstream crystalline silicon (c-Si) solar cell performance is surface passivation, which is at the center of the ongoing transition from cells with direct silicon-metal contacts to full area passivating contacts. In the ...

EPFL2022