Publications related to Selective etching of AlInN/GaN heterostructures for MEMS technology

High density lithium niobate photonic integrated circuits

Rui Ning Wang, Tobias Kippenberg, Mikhail Churaev, Anat Siddharth, Zelin Tan, Nikolai Kuznetsov, Zihan Li, Junyin Zhang

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...

Nature Portfolio2023

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Demonstrating and Unraveling a Controlled Nanometer-Scale Expansion of the Vacancy Defects in Graphene by CO2

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Kuang-Jung Hsu

A controlled manipulation of graphene edges and vacancies is desired for molecular separation, sensing and electronics applications. Unfortunately, available etching methods always lead to vacancy nucleation making it challenging to control etching. Herein ...

Wiley-VCH Verlag GmbH2022

Smart Slit Assembly Employing Continuously Tunable MEMS Shutter

Benedikt Guldimann, Niels Quack, Gergely Huszka, Hamed Sattari, Anton Lagosh

We present the concept and detailed design of a Smart Slit Assembly for next generation spectrometers, and we experimentally demonstrate operation of an individual 221 mu m x 111 mu m smart slit channel employing a MEMS actuated shutter to continuously mod ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Systematic design of millisecond gasification reactor for the incorporation of gas-sieving nanopores in single-layer graphene

Kumar Varoon Agrawal, Shiqi Huang, Luis Francisco Villalobos Vazquez de la Parra, Shaoxian Li, Kuang-Jung Hsu

Etching an ensemble of vacancy defects (nanopores) in single-layer graphene (SLG) to obtain a high density of nanopores with an effective size that enables high-performance gas sieving is challenging. This is because nanopore nucleation and expansion are u ...

2021

Mems Shutter Based Variable Optical Attenuator Integrated With Large Core Multimode Rectangular Waveguides

Benedikt Guldimann, Niels Quack, Gergely Huszka, Hamed Sattari, Anton Lagosh

We present the concept and design, and we report on the experimental performance of a broadband Variable Optical Attenuator (VOA) for integration with large-core rectangular multimode waveguides. Operation of an individual 221 mu m x 111 mu m optical waveg ...

IEEE2021

Optimized electrochemical breakdown etching using temporal voltage variation for formation of nanopores in a silicon membrane

Miao Zhang

Dielectric breakdown etching is a well-known method of making nanopores on thin (similar to 50 nm) dielectric membranes. However, voltage driven translocation of biomolecules through such nanopores becomes extremely fast. For improved detection, for instan ...

ELSEVIER SCIENCE SA2021

The Michelangelo step: removing scalloping and tapering effects in high aspect ratio through silicon vias

Edoardo Charbon, Sandro Carrara, Simone Frasca, Rebecca Camilla Leghziel

We present here, for the first time, a fabrication technique that allows manufacturing scallop free, non-tapered, high aspect ratio in through-silicon vias (TSVs) on silicon wafers. TSVs are among major technology players in modern high-volume manufacturin ...

Nature Research2021

Real- and Q-space travelling: multi-dimensional distribution maps of crystal-lattice strain (epsilon(044)) and tilt of suspended monolithic silicon nanowire structures

Yusuf Leblebici, Alex Dommann, Zuhal Tasdemir, Antonia Neels, Simone Dolabella

Silicon nanowire-based sensors find many applications in micro- and nano-electromechanical systems, thanks to their unique characteristics of flexibility and strength that emerge at the nanoscale. This work is the first study of this class of micro- and na ...

INT UNION CRYSTALLOGRAPHY2020

Enhancement of optical quality factor by thermal annealing of single crystal diamond micro-resonators

Niels Quack, Marcell Kristof Kiss, Teodoro Graziosi, Sichen Mi

We report on the increase in optical quality factor of a suspended single crystal diamond micro-disk resonator by thermal annealing. The resonators are fabricated by Deep Reactive Ion Etching (DRIE) to obtain circular pillars in bulk single crystal diamond ...

IEEE2018

Monolithic Fabrication of Silicon Nanowires Bridging Thick Silicon Structures

Yusuf Leblebici, Oliver Peric, Davide Sacchetto, Zuhal Tasdemir

A monolithic process is developed for the fabrication of Si nanowires within thick Si substrates. A combination of anisotropic etch and sidewall passivation is utilized to protect and release Si lines during the subsequent deep etch. An etch depth of 10 mu ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2018

Single crystal diamond micro-disk resonators by focused ion beam milling

Niels Quack, Marcell Kristof Kiss, Teodoro Graziosi, Sichen Mi

We report on single crystal diamond micro-disk resonators fabricated in bulk chemical vapor deposition diamond plates (3 mm x 3 mm x 0.15 mm) using a combination of deep reactive ion etching and Focused Ion Beam (FIB) milling. The resulting structures are ...

2018

III-Nitride Semiconductor Photonic Nanocavities on Silicon

Ian Michael Rousseau

Optical nanocavities enhance light-matter interaction due to their high quality factors (Q) and small modal volumes (V). The control of light-matter interaction lies at the heart of potential applications for integrated optical circuits, including optical ...

EPFL2018

Control of the interaction strength of photonic molecules by nanometer precise 3D fabrication

Jürgen Brugger, Yuliya Lisunova

Applications for high resolution 3D profiles, so-called grayscale lithography, exist in diverse fields such as optics, nanofluidics and tribology. All of them require the fabrication of patterns with reliable absolute patterning depth independent of the su ...

Nature Research2017

Superplastic behavior of silica nanowires obtained by direct patterning of silsesquioxane-based precursors

Yusuf Leblebici, Mustafa Yilmaz, Mohammad Nasr Esfahani

Silica nanowires spanning 10 μm-deep trenches are fabricated from different types of silsesquioxane-based precursors by direct e-beam patterning on silicon followed by release through deep reactive ion etching. Nanowire aspect ratios as large as 150 are ac ...

Institute of Physics2017

High-aspect ratio nanopatterning via combined thermal scanning probe lithography and dry etching

Jürgen Brugger, Yuliya Lisunova

Thermal scanning probe lithography is an emerging nanofabrication technique for rapid prototyping of arbitrary topographies in thermally sensitive resist. This feature, paired to the recent advances in dry plasma etching techniques, allows the fabrication ...

Elsevier2017

Release area confinement in Contour Mode Resonators

Luis Guillermo Villanueva Torrijo, Annalisa De Pastina, Andrea Lozzi

In this paper we propose a modified fabrication process to finely define the region surrounding the resonator that undergoes Si etching in CMRs. The unpredictable undercut has been shown to lead to Q instability within microns' variation. High aspect ratio ...

Ieee2017

Fabrication defects and grating couplers in III-nitride photonic crystal nanobeam lasers (Conference Presentation)

Jean-François Carlin, Nicolas Grandjean, Raphaël Butté, Ian Michael Rousseau

We report a numerical and experimental investigation of fabrication tolerances and outcoupling in optically pumped III-nitride nanolasers operating near lambda = 460 nm, in which feedback is provided by a one-dimensional photonic crystal nanobeam cavity an ...

Spie-Int Soc Optical Engineering2016

A Deep Etching Mechanism for Trench-Bridging Silicon Nanowires

Yusuf Leblebici, Zuhal Tasdemir

Introducing a single silicon nanowire with a known orientation and dimensions to a specific layout location constitutes a major challenge. The challenge becomes even more formidable, if one chooses to realize the task in a monolithic fashion with an extrem ...

Institute of Physics2016

Microfluidic Scintillation Detectors for High Energy Physics

Pietro Maoddi

This thesis deals with the development and study of microfluidic scintillation detectors, a technology of recent introduction for the detection of high energy particles. Most of the interest for such devices comes from the use of a liquid scintillator, whi ...

EPFL2015