Publications related to Thermal stability of nanometric TiC-carbon composites: effects of carbon allotropes and Zr milling impurities

Related publications (31)

In Situ Recrystallization and Phase Transformations in Laser Processing of Metals and Alloys : Microstructure Design and Monitoring

Laser Powder Bed Fusion (LPBF) is a method of Additive Manufacturing extensively used for metal 3D printing. It utilises a laser to selectively melt metallic powder particles based on a Computer Aided Design (CAD) model. This technique enables the construc ...

EPFL2025

A downsized laser powder bed fusion device for operando neutron studies: design and experiments

Roland Logé

This work reports on the development of a downsized laser powder bed fusion device for operando neutron characterization. The design considerations, device configurations, and detailed setup are described. The device is optimized for installations at neutr ...

2025

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

Stefano Mischler

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Diagenetic isotope exchange in biocalcites for paleoclimate reconstruction

Deyanira Graciela Cisneros Lazaro

The oxygen isotope compositions of fossil biocalcites, such as foraminifera, bivalves, brachiopods, and belemnites have allowed for reconstructions of sea surface and deep ocean temperatures throughout the Phanerozoic and constitute the most important reco ...

EPFL2024

The isotopic signature of U(V) during bacterial reduction

Marinella Mazzanti, Rizlan Bernier-Latmani, Radmila Faizova, Ashley Richards Brown, Margaux Camille Andréa Molinas

The two-step electron transfer during bacterial reduction of UVI to UIV is typically accompanied by mass-independent fractionation of the 238U and 235U isotopes, whereby the heavy isotope accumulates in the reduced product. However, the role of the UV inte ...

2024

Atomic level insight into irradiation effects in nuclear fuel materials

Shaileyee Bhattacharya

Microstructural evolution during in-pile irradiation, radiation damage effects and fission products behavior in UO2 nuclear fuel are key issues in understanding and for the modeling of the performance as well as safety characteristics of nuclear fuels in t ...

EPFL2024

Contradict mechanism of long-term magnesium and sodium sulfate attacks of nano silica-modified cement mortars - Experimental and thermodynamic modeling

Qiao Wang

The mechanisms of external sulfate attack on cement mortars containing nano silica have been studied under full immersion conditions after 3 years. The sulfate degradation processes were compared between sodium sulfate and magnesium sulfate solutions with ...

Elsevier Sci Ltd2024

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

High power electrostatic beam splitter for a proton beamline

Hua Zhang, Mike Seidel

The High Intensity Proton Accelerator facility (HIPA) delivers a 590 MeV cw (50.6 MHz) proton beam with up to 1.4 MW beam power (2.4 mA) to spallation and meson production targets serving particle physics experiments and material research. The main acceler ...

2024

Organic matters, but inorganic matters too: column examination of elevated mercury sorption on low organic matter aquifer material using concentrations and stable isotope ratios

Lorenz Schwab

Sorption of mercury (Hg) in soils is suggested to be predominantly associated with organic matter (OM). However, there is a growing collection of research that suggests that clay minerals and oxides are also important solid phases for the sorption of solu ...

2024

Technical note: Two-component electrical-conductivity-based hydrograph separation employing an exponential mixing model (EXPECT) provides reliable high-temporal-resolution young water fraction estimates in three small Swiss catchments

Jana Freiin von Freyberg

The young water fraction represents the portion of water molecules in a stream that have entered the catchment relatively recently, typically within 2-3 months. It can be reliably estimated in spatially heterogeneous and nonstationary catchments from the a ...

Copernicus Gesellschaft Mbh2024

Soliton gas: Theory, numerics, and experiments

Andrey Gelash

The concept of soliton gas was introduced in 1971 by Zakharov as an infinite collection of weakly interacting solitons in the framework of Korteweg-de Vries (KdV) equation. In this theoretical construction of a diluted (rarefied) soliton gas, solitons with ...

Amer Physical Soc2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Spectral and thermodynamic properties of interacting electrons with dynamical functionals

Tommaso Chiarotti

Empowered by ever-increasing computational power and algorithmic developments, electronic-structure simulations continue to drive research and innovation in materials science. In this context, ab-initio calculations offer an unbiased platform for the under ...

EPFL2023

Influence of temperature on phase assemblages of belite-ye'elimite cement

Karen Scrivener, Diana Londoño Zuluaga, Natechanok Chitvoranund

This paper studies the effect of temperature on the phase assemblages of belite-ye'elimite cement. A comparison is made between thermodynamic modelling and experimental data at 28 and 180 days of hydration at 5, 20, 40, and 60 degrees C. The fast reaction ...

Pergamon-Elsevier Science Ltd2023

Nature-Inspired Stalactite Nanopores for Biosensing and Energy Harvesting

Aleksandra Radenovic, Victor Carle Adrien Boureau, Andrey Chernev, Mukeshchand Thakur, Tzu-Heng Chen, Yunfei Teng, Vasily Artemov, Lucie Navratilova, Nianduo Cai

Nature provides a wide range of self-assembled structures from the nanoscale to the macroscale. Under the right thermodynamic conditions and with the appropriate material supply, structures like stalactites, icicles, and corals can grow. However, the natur ...

Wiley-V C H Verlag Gmbh2023

Electromagnetic processes of nuclear excitation: from direct photoabsorption to free electron and muon capture

Simone Gargiulo

In the vast expanse of the Universe and on our planet, nuclei exist in a state of excitement. These excited nuclear states (isomers) can persist for varying periods, from fractions of a second to billions of years and beyond, before decaying to their groun ...

EPFL2023

Growth and investigation of Argon thin films adsorbed on graphite by means of Ultrafast Electron Diffraction

Paolo Usai

Starting from our big universe to the microscopic world, phase transitions play an important role in nature. Just after the Big Bang our universe experienced multiple phase transitions, from high-temperature plasma to the matter we know today. Phase transi ...

EPFL2023

Mercury Isotope Fractionation during Dark Abiotic Reduction of Hg(II) by Dissolved, Surface-Bound, and Structural Fe(II)

Lorenz Schwab

Stable mercury (Hg) isotope ratios are an emerging tracer for biogeochemical transformations in environmental systems, but their application requires knowledge of isotopic enrichment factors for individual processes. We investigated Hg isotope fractionatio ...

Amer Chemical Soc2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023