Publications related to Cost-effective dual-polarised leaky-wave antennas enabled by three-dimensional printing

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Arnaud Bertsch, Jürgen Brugger, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

Deep-UV approaches and printing of indium zinc oxide thin-film transistors targeting their processing on thermosensitive substrates

Alessio Mancinelli

Novel metal-oxides (MOx) semiconductors for thin-film transistors (TFTs) are being developed as they can offer superior electric performances over organic-based counterparts. MOx TFTs processed on foil could be exploited in smart labels as RFID and NFC tag ...

EPFL2021

A data-driven perspective on the colours of metal-organic frameworks

Luc Patiny, Seyedmohamad Moosavi, Berend Smit, Mehrdad Asgari, Christopher Patrick Ireland, Kevin Maik Jablonka

Colour is at the core of chemistry and has been fascinating humans since ancient times. It is also a key descriptor of optoelectronic properties of materials and is often used to assess the success of a synthesis. However, predicting the colour of a materi ...

2021

All-Printed Electrocorticography Array for In Vivo Neural Recordings

Fabian Michael Lütolf, Diego Ghezzi, Eleonora Borda, Laura Ferlauto, Nenad Marjanovic

Bioelectronic and neuroprosthetic interfaces rely on implanted microelectrode arrays (MEAs) to interact with the human body. Printing techniques, such as inkjet and screen printing, are attractive methods for the manufacturing of MEAs because they allow fl ...

2020

Inkjet printed mesoscopic perovskite solar cells with custom design capability

Frank Nüesch, Jakob Heier, Sina Abdolhosseinzadeh

Customizable solar cells are required for aesthetic indoor and outdoor photovoltaic deployment as well as for the freedom of design of small and portable power supplies. We demonstrate that drop on demand inkjet printing can be used for the fabrication of ...

ROYAL SOC CHEMISTRY2020

Inkjet Printing of Complex Soft Machines with Densely Integrated Electrostatic Actuators

Samuel Rosset, Herbert Shea, Samuel Schlatter, Giulio Grasso

A multimaterial inkjet printing method for integrated soft multifunctional machines is reported, combining dense arrays of electrostatic actuators, multilayer electrical routing, and complex networks of microfluidic channels in one printing process. Most a ...

2020

Dimensional scaling of high-speed printed organic transistors enabling high-frequency operation

Vivek Subramanian

Printed electronics has promised to deliver low-cost, large-area and flexible electronics for mass-market applications for some time; however, so far one limiting factor has been device performance. Over the last decade, great progress has been made in ter ...

IOP PUBLISHING LTD2020

Implementation of Functional Microfluidic Dispensing Tools Enabling Enhanced Control in Extrusion Bioprinting

Ludovic Serex

Inspired from additive manufacturing's success, the structuring of biocompatible materials through bioprinting has become a growing field of research in the past fifteen years. It opened the door to a plethora of applications ranging from the fabrication o ...

EPFL2019

Rapid inkjet printing of high catalytic activity Co3O4 /N-rGO layers for oxygen reduction reaction

Hubert Girault, Véronique Amstutz, Emad Oveisi, Andreas Stephan Lesch, Victor Costa Bassetto

The accurate and reproducible large-scale production of catalyst layers containing low-cost, abundant electrocatalysts gains in importance. Herein, pivotal factors are discussed that need to be considered when a combined inkjet printing and photonic curing ...

2018

Compact laser-assisted tools for high-resolution additive manufacturing

Paul Delrot

Micro-additive manufacturing has become an enabling technology in biomedical research as it allows for instance creating functional microstructures or studying cellular interactions at the microscale. Among the various manufacturing techniques laser-actuat ...

EPFL2018

Dye-sensitized solar cells with inkjet-printed dyes

Michael Graetzel, Shaik Mohammed Zakeeruddin, Syed Ghufran Hashmi

The slow process in which the light absorbing dye molecules are adsorbed from solution on the nano-crystalline TiO2 photoelectrode film has been a handicap to the fast and cost-effective fabrication of dye-sensitized solar cells (DSSCs) using printing tech ...

Royal Soc Chemistry2016

Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID Antennas

Nico de Rooij, Francisco Molina Lopez, Danick Briand, Jinyu Jason Ruan

We report the modeling, and geometrical and electrical characterization, of inkjet and screen-printed patterns on different polymeric substrates for use as antennas in radio-frequency identification (RFID) applications. We compared the physical and electri ...

Springer Verlag2014

New Tools for Hydrogel-Based 3D Bioprinting

Andrea Negro

The in vitro recapitulation of tissue and organ function represents one of the main objectives of tissue engineering. Developments in this field have numerous applications, from alleviating the shortage of donor organs to providingmore representative pla ...

EPFL2014

Stencil Lithography and Inkjet Printing as New Tools for Life Sciences Research

Kristopher Pataky

This thesis work focuses on applying microtechnology to produce three toolkits for life-sciences research. The first technique presented is nanostencil lithography for patterning cell adhesions. Nanostencil lithography is a shadow-mask micro and nanopatter ...

EPFL2011