Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Bokeon KwakExpertise
Bio-inspired robotics, Edible Robotics, Soft Robotics
Marianne LiebiMarianne Liebi is Tenure-Track Assistant Professor at EPF Lausanne and head of the Laboratory for X-ray characterization of materials (cam-X) and the group “
Structure and Mechanics of Advanced Materials
” at PSI. She has been appointed in 2021 at EPFL where she is part of the Institute of Materials within the School of Engineering. Marianne Liebi studied Food Science at ETH Zurich where she also obtained her PhD in 2013 in the Laboratory of Food Process Engineering lead by Prof. Erich J. Windhab. Within this project started using small-angle neutron scattering at PSI for the characterization of soft-matter, namely of magnetic alignable self-assembly structures. As a Postdoc in the coherent X-ray scattering group at the Swiss Light Source she worked from 2013-2016 on method development in SAXS tensor tomography. In 2016 she moved to Sweden where after a short period at the NanoMAX beamline, MAXIV Laboratory, Lund she started her own research group in 2017 as Assistant Professor at the Chalmers University of Technology, Gothenburg, and became Docent in Physics in spring 2020. She kept her affiliation at Chalmers University of Technology, where still part of her group is located (
Liebi research group
) when moving back to Switzerland in 2020 where she was Scientific Group Leader in the Center for X-ray Analytics at Empa, St.Gallen, before starting the joint position between EPFL and PSI in November 2021.
Tara HabibiCurrent Work
SafeShore ProjectPrincipal Investigator Climate change will lead to significant sea level rise and more frequent, intense storm surges. These developments pose severe risks to coastal regions, threatening human lives, cultural heritage, and economic stability. Conventional shoreline protection methods, such as seawalls and armour blocks, have proven effective. However, their reliance on heavy concrete makes them slow to construct and environmentally unsustainable. To address these challenges, t
Victor Carle Adrien BoureauExpertise
Aberration-corrected TEM and STEMQuantative microscopyElectron diffractionStrain mapping (GPA, precession 4D-STEM)Electric and magnetic field mapping (electron holography, DPC, 4D-STEM)
Teaching & PhD Past EPFL PhD Students as codirector Pierpaolo Ranieri Courses Scanning and Analytical Transmission Electron Microscopy MSE-735 This intensive course discusses advanced TEM techniques such as: scanning TEM; analytical TEM using EELS and EDX; aberration corrected imaging; and image s
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Ayush AgarwalCurrent work
Developing size resolved elemental analysis methods for characterizing nano-objects in process effluents and environmental samples
Education PhD | Energy - Chemistry and Chemical Engineering 2020 – 2020 EPFL – École polytechnique fédérale de Lausanne / Paul Scherrer Institute M.Sc. | Chemical Engineering for Energy and Environment 2017 – 2019 KTH Royal Institute of Technology B.E. (Hons.) | Chemical Engineering 2011 – 2015 Birla I
Stefana ParaschoTeaching & PhD PhD Students Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Courses Capitalizing on Uncertainty AR-809 SUMMER SCHOOL - Capitalizing on Uncertainty is a 6-day Summer school exploring uncertainty as a productive resource in design and fabrication through lectures, hands-on experiments, and the collaborative design and construction of a full-scale structure in a human-robot fabrication setting. Digital design and making: A criti
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
Show more