Publications related to An empirical study on the characterization of machined surface integrity by chip morphology in dry end-milling of titanium alloy

Related publications (30)

DiffCheck: A scan-CAD evaluation tool for digital manufacturing and assembly processes in timber construction

Yves Weinand, Julien Gamerro, Stefana Parascho, Andrea Settimi, Marianthi Eririni Kladeftira, Eleni Maria Skevaki, Damien Lambert Alain Félicien Gilliard

In digital timber construction, scanning technologies and point cloud data are widely used due to the accessibility of affordable 3D sensors, photogrammetry, and userfriendly CAD tools. While typically not employed for accuracy checks in timber fabrication ...

CRC Press2025

TSLAM: a tag-based object-centered monocular navigation system for augmented manual woodworking

Yves Weinand, Julien Gamerro, Andrea Settimi, Hong-Bin Yang

TimberSLAM (TSLAM) is an object-centered, tag-based visual self-localization and mapping (SLAM) system for monocular RGB cameras. It was specifically developed to support a robust and augmented reality pipeline for close-range, noisy, and cluttered fabrica ...

2024

Near-Zero Parasitic Shift Flexure Pivots Based on Coupled n-RRR Planar Parallel Mechanisms

Simon Nessim Henein, Etienne Frédéric Gabriel Thalmann, Florent Cosandier, Loïc Benoît Tissot-Daguette

Flexure pivots, which are widely used for precision mechanisms, generally have the drawback of presenting parasitic shifts accompanying their rotation. The known solutions for canceling these undesirable parasitic translations usually induce a loss in radi ...

2024

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Corrosion behavior and tribological-microstructural characterization of Al/ZrO2-Gr hybrid composite fabricated via Friction Stir Processing

Seyyedezzatollah Moosavi

The present study investigates the microstructural evolution, tribological properties, and corrosion behavior of hybrid metal matrix composites reinforced by a combination of graphite (Gr) and zirconia (ZrO2) particles fabricated by Friction Stir Processin ...

2023

The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys

William Curtin, Carolina Baruffi, You Rao

Mo-Ti alloys form solid solutions over a wide range of compositions, with lattice misfit parameters increasing significantly with titanium content. This indicates a strong increase in the critical stress for edge dislocation motion. Here, we probe the tran ...

SPRINGERNATURE2023

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Eric Boillat, Alexandre Masserey

Laser polishing (LP) is a process that allows a significant reduction of the surface roughness of a metal workpiece via re-melting a shallow layer of material. However, the practical use of LP is limited due to the difficulty of satisfying the high surface ...

MDPI2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Olivier Martin, Christian Santschi, Hsiang-Chu Wang, Jeonghyeon Kim, Debdatta Ray

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

Modelling Workflow for Segmented Timber Shells using Wood-wood Connections

Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...

Springer2019

Screw vs. edge dislocation strengthening in body-centered-cubic high entrophy alloys and implications for guided alloy design

William Curtin, Francesco Maresca, Carolina Baruffi

Body-centered-cubic (BCC) high entropy alloys (HEAs) can show exceptionally high strength up to high temperatures. Mechanistic theories are needed to guide alloy discovery within the immense multicomponent HEA compositional space. Here, two new theories fo ...

SPRINGER HEIDELBERG2022

In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting

Helena Van Swygenhoven, Nicola Casati, Karl Alan Sofinowski

A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...

2019

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

In Situ Deformation Studies of HCP Metal Alloys with Neutron Diffraction, X-Ray Diffraction, and High Resolution Digital Image Correlation

Karl Alan Sofinowski

Mg and Ti alloys are attractive materials for structural applications in the transportation and biomedical industries due to their high strength-to-weight ratios. However, due to their hexagonally close-packed (HCP) lattice structure, they exhibit poor for ...

EPFL2019

In situ characterization of work hardening and springback in grade 2 alpha-titanium under tensile load

Helena Van Swygenhoven

Plastic effects during sheet metal forming can lead to undesirable distortions in formed components. Here, the three-stage work hardening and plastic strain recovery ("springback") in a cold-rolled, alpha-phase commercially pure titanium is examined. Inter ...

2019

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

Aude Billard, Rui Wu

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy

Roland Logé

As cast FeCrCuMnNi high entropy alloys were heat treated at different temperatures and times. Structure and mechanical properties of the heat treated alloy were studied using X-Ray diffraction, tensile test, hardness test and scanning electron microscopy. ...

2019

Segmented Spiral Using Inter-Connected Timber Elements

Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Martin Thomas Nakad

This paper describes the construction process of a scenographic structure - five meters high spiral. It consists of following parts: CAD modeling work-flow, prototyping and FEM structural calculation, assembly and on-site loading test. The structure was co ...

INT CENTER NUMERICAL METHODS ENGINEERING2019

A new hybrid Additive Manufacturing process combining Selective Laser Melting and Laser Shock Peening

Nikola Kalentics

Additive Manufacturing (AM) in whole and especially Selective Laser Melting (SLM) are already making a revolution in the way parts are designed and manufactured with the ability to produce lightweight parts with unprecedented complex geometries which are o ...

EPFL2018

Operando X-ray diffraction during laser 3D printing: from machine design to experiments and computer simulations

Samy Hocine

The importance of additive manufacturing, also known as 3D printing, has grown exponentially in the recent years thanks to its high flexibility to manufacture intricate parts. This process can be divided into many different sub-categories, depending on the ...

EPFL2020