Publications associées à An empirical study on the characterization of machined surface integrity by chip morphology in dry end-milling of titanium alloy

TSLAM: a tag-based object-centered monocular navigation system for augmented manual woodworking

Yves Weinand, Julien Gamerro, Andrea Settimi, Hong-Bin Yang

TimberSLAM (TSLAM) is an object-centered, tag-based visual self-localization and mapping (SLAM) system for monocular RGB cameras. It was specifically developed to support a robust and augmented reality pipeline for close-range, noisy, and cluttered fabrica ...

2024

Near-Zero Parasitic Shift Flexure Pivots Based on Coupled n-RRR Planar Parallel Mechanisms

Simon Nessim Henein, Florent Cosandier, Etienne Frédéric Gabriel Thalmann, Loïc Benoît Tissot-Daguette

Flexure pivots, which are widely used for precision mechanisms, generally have the drawback of presenting parasitic shifts accompanying their rotation. The known solutions for canceling these undesirable parasitic translations usually induce a loss in radi ...

2024

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys

William Curtin, Carolina Baruffi, You Rao

Mo-Ti alloys form solid solutions over a wide range of compositions, with lattice misfit parameters increasing significantly with titanium content. This indicates a strong increase in the critical stress for edge dislocation motion. Here, we probe the tran ...

SPRINGERNATURE2023

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Alexandre Masserey, Eric Boillat, Bastian Meylan

Laser polishing (LP) is a process that allows a significant reduction of the surface roughness of a metal workpiece via re-melting a shallow layer of material. However, the practical use of LP is limited due to the difficulty of satisfying the high surface ...

MDPI2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Christian Santschi, Olivier Martin, Debdatta Ray, Jeonghyeon Kim, Hsiang-Chu Wang

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

Screw vs. edge dislocation strengthening in body-centered-cubic high entrophy alloys and implications for guided alloy design

William Curtin, Francesco Maresca, Carolina Baruffi

Body-centered-cubic (BCC) high entropy alloys (HEAs) can show exceptionally high strength up to high temperatures. Mechanistic theories are needed to guide alloy discovery within the immense multicomponent HEA compositional space. Here, two new theories fo ...

SPRINGER HEIDELBERG2022

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

Aude Billard, Rui Wu

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Operando X-ray diffraction during laser 3D printing: from machine design to experiments and computer simulations

Samy Hocine

The importance of additive manufacturing, also known as 3D printing, has grown exponentially in the recent years thanks to its high flexibility to manufacture intricate parts. This process can be divided into many different sub-categories, depending on the ...

EPFL2020

Phase Studies of Additively Manufactured Near Beta Titanium Alloy-Ti55511

Helena Van Swygenhoven, Nicola Casati

The effect of electron-beam melting (EBM) and selective laser melting (SLM) processes on the chemical composition, phase composition, density, microstructure, and microhardness of as-built Ti55511 blocks were evaluated and compared. The work also aimed to ...

2020

Modelling Workflow for Segmented Timber Shells using Wood-wood Connections

Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...

Springer2019

In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting

Helena Van Swygenhoven, Karl Alan Sofinowski, Nicola Casati

A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...

2019

In Situ Deformation Studies of HCP Metal Alloys with Neutron Diffraction, X-Ray Diffraction, and High Resolution Digital Image Correlation

Karl Alan Sofinowski

Mg and Ti alloys are attractive materials for structural applications in the transportation and biomedical industries due to their high strength-to-weight ratios. However, due to their hexagonally close-packed (HCP) lattice structure, they exhibit poor for ...

EPFL2019

In situ characterization of work hardening and springback in grade 2 alpha-titanium under tensile load

Helena Van Swygenhoven

Plastic effects during sheet metal forming can lead to undesirable distortions in formed components. Here, the three-stage work hardening and plastic strain recovery ("springback") in a cold-rolled, alpha-phase commercially pure titanium is examined. Inter ...

2019

Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy

Roland Logé, Ali Shabani

As cast FeCrCuMnNi high entropy alloys were heat treated at different temperatures and times. Structure and mechanical properties of the heat treated alloy were studied using X-Ray diffraction, tensile test, hardness test and scanning electron microscopy. ...

2019

Segmented Spiral Using Inter-Connected Timber Elements

Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Martin Thomas Nakad, Loïc Henri Pelletier

This paper describes the construction process of a scenographic structure - five meters high spiral. It consists of following parts: CAD modeling work-flow, prototyping and FEM structural calculation, assembly and on-site loading test. The structure was co ...

INT CENTER NUMERICAL METHODS ENGINEERING2019

A new hybrid Additive Manufacturing process combining Selective Laser Melting and Laser Shock Peening

Nikola Kalentics

Additive Manufacturing (AM) in whole and especially Selective Laser Melting (SLM) are already making a revolution in the way parts are designed and manufactured with the ability to produce lightweight parts with unprecedented complex geometries which are o ...

EPFL2018

Optimisation of Current and Pulse Duration in Electric Discharge Drilling of D2 Steel Using Graphite Electrode

Electric discharge machining (EDM) is one of the viable techniques for machining of D2 steel, in which the material removal occurs by spark erosion. The poor selection of EDM parameters affect the machining quality and productivity. Considering this, the p ...

2018