Publications related to Analysis, modeling and design of a CMOS Super-Regenerative Receiver for implanted medical devices under square and sinusoidal quench signals

Related publications (30)

Design Trade-offs of Second Harmonic Minimization in Solid-State Transformers

In two-stage solid-state transformers (SSTs) equipped with LLC DC/DC converters for galvanic isolation, fixed-frequency open-loop operation of LLC stages has been a straightforward and prevailing design choice. Meanwhile, with a closed-loop-operated LLC co ...

Institute of Electrical and Electronics Engineers (IEEE)2025

DEMO: Dielectric elastomer actuators (DEAs) for the restoration of facial movements

Yves Perriard, Yoan René Cyrille Civet, Stefania Maria Aliki Konstantinidi, Simon Holzer, Andres Osorio Salazar, Marc Michel Charles Favier

Facial paralysis is a highly burdening condition, resulting in a patient's inability to move his musculature on one or both sides of the mouth. The restoration of facial movement is crucial for enhancing the overall patients' quality of life. The use of DE ...

SPIE2025

Magnetism of Single Surface Adsorbed Atoms Studied with Radio-Frequency STM

Clément Marie Soulard

This thesis investigates the magnetic properties of single atoms and molecules adsorbed on thin magnesium oxide decoupling layers, grown on a silver single crystal. To address these systems experimentally, we use a low temperature scanning tunneling micros ...

EPFL2024

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

Cong Ding

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Mohammad Javad Karimi

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Teaching Not To

Charlotte Malterre-Barthes

Two design studios were successively taught in two schools of architecture: one at the Harvard Graduate School of Design (GSD) and the other at the Swiss Federal Institute of Technology in Lausanne (EPFL) in Lausanne, Switzerland, based on "A Global Morato ...

Taylor & Francis Inc2024

Course Design - A Visual and Modular Approach

Marc Laperrouza

This book has been designed for instructors in higher education or adult training who wish to develop a new course or revise an existing one. It adopts a practical, visual, and modular approach based on the principle of constructive alignment. At its heart ...

EPFL Press2024

Technology-Aware Logic Synthesis for Superconducting Electronics

Giovanni De Micheli, Alessandro Tempia Calvino, Siang-Yun Lee, Dewmini Sudara Marakkalage, Mingfei Yu, Rassul Bairamkulov

Superconducting electronics provide us with cryogenic digital circuits that can rival established technologies in performance and energy consumption. Today, the lack of tools for the design of large-scale integrated superconducting circuits is a major obst ...

2024

An aircraft assembly process formalism and verification method based on semantic modeling and MBSE

Dimitrios Kyritsis, Jinzhi Lu, Xiaochen Zheng

The aircraft assembly system is highly complex involving different stakeholders from multiple domains. The design of such a system requires comprehensive consideration of various industrial scenarios aiming to optimize key performance indicators. Tradition ...

Elsevier Sci Ltd2024

Models implemented in the methodological approach to design the initial STEP first wall contour

Kevin Henricus Annemarie Verhaegh, Davide Galassi, Filippo Bagnato, Dario Vaccaro

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

The Current State of the OBI DICT Project: A Bilingual e-Dictionary of Oracle-Bone Inscriptions with AI Image Recognition

Shuo Wen

This article reports on the current state of the OBI DICT project, a bilingual e-dictionary of oracle-bone inscriptions (OBI), incorporating artificial intelligence (AI) image recognition technology. It first provides a brief overview of the development of ...

Buro Van Die Wat2024

Highly Parallel RTL Simulation

Seyedmahyar Emami

Verification and testing of hardware heavily relies on cycle-accurate simulation of RTL. As single-processor performance is growing only slowly, conventional, single-threaded RTL simulation is becoming impractical for increasingly complex chip designs and ...

EPFL2024

A diversity-driven discovery of potential nanoporous materials for energy-related applications

Sauradeep Majumdar

The design and discovery of potential novel materials is critical for the advancement of climate change mitigation technologies. In this respect, metal-organic frameworks (MOFs) have received considerable attention over the last two decades. The combinatio ...

EPFL2024

Non-contact sensing for anomaly detection in wind turbine blades: A focus-SVDD with complex-valued auto-encoder approach

Olga Fink, Gaëtan Michel Frusque

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs of WTBs, reduce capacity factors of wind farms, and occasionally lead to severe and disastrous consequence ...

2024

Surface segregation in high-entropy alloys from alchemical machine learning

Michele Ceriotti, Sandip De, Guillaume André Jean Fraux, Arslan Mazitov, Nataliya Lopanitsyna

High-entropy alloys (HEAs), containing several metallic elements in near-equimolar proportions, have long been of interest for their unique mechanical properties. More recently, they have emerged as a promising platform for the development of novel heterog ...

Iop Publishing Ltd2024

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

Soft-Switching CO Hysteresis Losses in GaN HEMTs: A Resonant-Sawyer-Tower Measurement Method

Yoan Sedjro Codjia, Yassin Bashar Salih Al-Nuaimee, Elison de Nazareth Matioli, Hongkeng Zhu, Yuan Zong

The inherent dissipated energy losses (Ediss) during the charging-discharging cycle of output capacitance (CO) in gallium nitride high-electron-mobility transistors (GaN HEMTs) limit their efficiency in soft-switching applications. Accurate characterizatio ...

Institute of Electrical and Electronics Engineers (IEEE)2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Strategy to systematically design and deploy the ITER plasma control system: A system engineering and model-based design approach

Richard Pitts, Federico Alberto Alfredo Felici, Federico Pesamosca, Anna Ngoc Minh Trang Vu

The paper details the process of developing the ITER Plasma Control System (PCS), that is, how to design and deploy it systematically, in the most efficient and effective manner. The integrated nature of the ITER PCS, with its multitude of coupled control ...

Elsevier Science Sa2024

An explorative method to support design decisions based on carbon constraints and daylight sufficiency needs

Nazanin Rezaei Oghazi

The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...

EPFL2024