Publications related to Geometrical Impact on Guided Mode Excitation in Solar Cells

Related publications (47)

Enhancing lifetime, forecasting, and economic benefits of photovoltaic technologies undergoing UV-induced degradation with optical filtering

Christophe Ballif, Antonin Faes, Christian Michael Wolff, Marion Solange Madeleine Dussouillez

Ultraviolet-induced degradation (UV-ID) of various PV cell types was analyzed under optical UV filters with different cutoff wavelengths. Cell types studied included interdigitated back contact (IBC), passivated emitter and rear totally diffused (PERT), an ...

2025

Unraveling the Role of Electron-Withdrawing Molecules for Highly Efficient and Stable Perovskite Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Likai Zheng, Mingyang Wei

Electron-withdrawing molecules (EWMs) have exhibited remarkable efficacy in boosting the performance of perovskite solar cells (PSCs). However, the underneath mechanisms governing their positive attributes remain inadequately understood. Herein, we conduct ...

Wiley-VCH Verlag GmbH2025

A Spatiotemporal analysis of photovoltaic electricity storage potential in electric vehicles

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

Decarbonizing mobility and integrating more renewable sources in electricity production are necessary levers to meet the climate targets. Coupling electric vehicle (EV) charging with photovoltaic (PV) electricity generation could help to provide clean elec ...

Aalborg University2025

All-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Virginia Carnevali, Nikolaos Lempesis, Mingyang Wei, Vladislav Slama, Lorenzo Agosta

Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improveme ...

NATURE PORTFOLIO2025

Visualising ionic screening in perovskite solar cells: a bumpy ride along the J–V curve

Frank Nüesch

The J–V bump and hysteresis in perovskite solar cells are studied combining measurement and simulation, linking them to spatial collection efficiency changes from ionic charge accumulation, as visualised in external quantum efficiency (EQE) spectra. ...

Royal Society of Chemistry (RSC)2025

Machine-learning-empowered FDTD/FEM simulations for predictive solar energy absorption in plasmonic metamaterial nanocavity arrays

Amir Jafargholi

FDTD/FEM simulations, strengthened by machine learning, achieve 95.44% optical absorption efficiency in TiO 2 /TiN plasmonic nanocavities for solar energy harvesting. ...

Royal Society of Chemistry (RSC)2025

Facile and Low-Cost Design Alternative of Spiro-OMeTAD as p-Type Semiconductor for Efficient Perovskite Solar Cells

Mohammad Khaja Nazeeruddin

A simple diphenylamine-based hole transporting material V1553 was synthesized and incorporated into a perovskite solar cell, which showed remarkable power conversion efficiency close to 23%. The investigated HTM was synthesized via one-step catalyst-free c ...

WILEY-V C H VERLAG GMBH2025

Self-dispatching a renewable energy community by means of battery energy storage systems

Mario Paolone, Francesco Gerini, Matthieu Benoit C. Jacobs

Renewable energy communities, where citizens, businesses, and institutions produce, consume, store, and share energy, are increasingly pivotal in energy markets. The use of shared community batteries introduces the challenge of adapting control strategies ...

2025

Hybrid Ag-mesh/Ta-doped TiO2 thin film configuration as a visible and near-infrared transparent electrode

Andreas Schueler, Jérémy Jacques Antonin Fleury, Krishna Manwani

This study focuses on the fabrication of a hybrid Ag-mesh/Ta-doped TiO2 (TTO) electrode that has a low sheet resistance and high transparency in the visible and near-infrared region, thereby holding significant commercialization potential. Here, ∼82 nm thi ...

2025

Device Performance of Emerging Photovoltaic Materials (Version 5)

Mohammad Khaja Nazeeruddin

This 5th annual "Emerging PV Report" highlights the latest advancements in the performance of emerging photovoltaic (e-PV) devices across various e-PV research areas, as documented in peer-reviewed articles published since August 2023. Updated graphs, tabl ...

WILEY-V C H VERLAG GMBH2024

Reliability and Long-term Performance of Building Integrated Photovoltaic (BIPV) Modules

Ebrar Özkalay

Solar photovoltaics (PV) is one of the most competitive renewable energy technologies in order to meet the increasing global energy demand and decrease CO2 emissions by competing effectively with fossil fuels. One of the important applications of PV energy ...

EPFL2024

Processing factors affecting roughness, optical and mechanical properties of nanocellulose films for optoelectronics

Tiffany Abitbol

This work aims to understand how nanocellulose (NC) processing can modify the key characteristics of NC films to align with the main requirements for high-performance optoelectronics. The performance of these devices relies heavily on the light transmittan ...

Elsevier Sci Ltd2024

Micro-homogeneity of lateral energy landscapes governs the performance in perovskite solar cells

Mohammad Khaja Nazeeruddin, Yong Ding

Suppression of energy disorders in the vertical direction of a photovoltaic device, along which charge carriers are forced to travel, has been extensively studied to reduce unproductive charge recombination and thus achieve high-efficiency perovskite solar ...

Nature Portfolio2024

Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications

Fabiana Lisco

Lightweight modules are essential for next-generation vehicle-integrated photovoltaic (VIPV) applications, such as solar-powered cars, allowing integration of solar cells beyond the roof, and on the hood, boot and body panels, and thereby extending the dri ...

Elsevier2024

Structural divergence of molecular hole selective materials for viable p-i-n perovskite photovoltaics: a comprehensive review

Mohammad Khaja Nazeeruddin, Peng Gao

Perovskite solar cells (PSCs) have garnered significant attention within the photovoltaic research community due to their remarkable progress in just one decade. Among the device configurations, the p-i-n structured PSC offers several advantages, including ...

Royal Society of Chemistry2024

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Kléber Nicolet-dit-Félix, Christophe Ballif, Matthieu Despeisse, Aïcha Hessler-Wyser, Jacques Levrat, Antonin Faes, Gianluca Cattaneo, Umang Bhupatrai Desai, Fahradin Mujovi

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024

Dataset to accompany publication "Best practices in measuring absorption at the macro- and microscale"

Giulia Tagliabue, Alan Richard Bowman, Fateme Kiani Shahvandi, Jiaming Ma

This dataset accompanies the publication "Best practices in measuring absorption at the macro- and microscale" published in APL Photonics. The data can be used to reproduce original plots in figures 1-4 in the main text and all original plots in the suppor ...

Zenodo2024

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

David Lyndon Emsley, Aditya Mishra, Michael Allan Hope, Manuel Cordova, Ümmügülsüm Günes

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

Wiley-VCH Verlag GmbH2024

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

Machine Learning for Screening Small Molecules as Passivation Materials for Enhanced Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Utilization of small molecules as passivation materials for perovskite solar cells (PSCs) has gained significant attention recently, with hundreds of small molecules demonstrating passivation effects. In this study, a high-accuracy machine learning model i ...

Wiley-VCH Verlag Gmbh2024