Publications related to Correction to: Numerical evaluation of test setups for determining the shear strength of masonry (vol 51, 110, 2018)

Related publications (28)

Framework to engineer existing bridges for sustainability, validated by applications

A framework to engineer existing structures, in particular bridges, and novel engineering methods and technologies are presented to extend the service duration of existing bridges while meeting the requirements of modern use. Accurate determination of brid ...

TAYLOR & FRANCIS LTD2025

Corrosion Behavior of Heat-Treated Fe-Based Shape Memory Alloys

Jean-Michel Sallese, Stefano Mischler, Anna Neus Igual Muñoz, Pranav Vivek Kulkarni

The influence of various heat treatments on the corrosion behavior of a novel iron-based shape memory alloy (Fe-SMA), Fe-17Mn-6Si-10Cr-4Ni-1(V,C), used as prestressing elements in civil engineering was examined through electrochemical corrosion methods. SM ...

2025

Local Shear Stress and Dyslipidemia Interfere with Actin Cyto-Skeleton and Lysosomal Organization Contributing to Vascular Fragility

Nikolaos Stergiopoulos, Rodrigo Araujo Fraga Da Silva

Shear stress is one of the major hemodynamic forces acting on the endothelium. However, it is not well known how endothelial cells (EC) respond mechanically to these stimuli in vivo. Here we investigated whether changes in biomechanics properties and shear ...

2024

Damage-augmented digital twins towards the automated inspection of buildings

Katrin Beyer, Radhakrishna Achanta, Bryan German Pantoja Rosero

Current procedures for the rapid inspection of buildings and infrastructure are subjective, time-consuming, and cumbersome to document, necessitating new technologies to automate the process and eliminate these shortcomings. Fortunately, recent development ...

2023

High Resolution Light-Based 3D Printing Of Cell-Laden Bio Constructs

Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot, Jorge Andres Madrid Wolff, Antoine Vincent Boniface

MARY ANN LIEBERT, INC2023

Toward Band n78 Shear Bulk Acoustic Resonators Using Crystalline Y-Cut Lithium Niobate Films With Spurious Suppression

Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli

This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...

Institute of Electrical and Electronics Engineers2023

Thermo-hydro-mechanical behavior of energy barrettes: Field experiments and numerical simulations

Lyesse Laloui, Alessandro Francesco Rotta Loria, Elena Ravera

Over the past two decades, the thermo-hydro-mechanical behavior of earth-contact structures such as piles, walls, slabs, and tunnels, which simultaneously provide structural support and energy supply, has been studied through various field experiments and ...

ELSEVIER2023

Output regulation via trajectory tracking for chemical reactors with jacket dynamics

Dominique Bonvin

This work deals with a control strategy to regulate homogeneous reaction systems in reactors equipped with a cooling jacket. The reaction system is expressed in terms of vessel extents and viewed as a single-input (the inlet coolant temperature), two-outpu ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Transcapacitances Modeling in ultra-thin gate-all-around junctionless nanowire FETs, including 2D quantum confinement

Farzan Jazaeri

In this work, we propose an analytical model for the intrinsic transcapacitances in ultra-thin gate-all-around junctionless nanowire field effect transistors in the presence of confined energy states of electrons. The validity of the developed model is con ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Programmable Seizure Detector Using a 32-bit RISC Processor for Implantable Medical Devices

Alexandre Schmid, Keyvan Farhang Razi

A programmable patient-customized epileptic seizure detector is proposed in this paper to enable neurologists and patients to have constructive interactions with the implantable medical device. The programmability feature is enabled by designing a low-powe ...

IEEE2023

Assessing real-world gait with digital technology? Validation, insights and recommendations from the Mobilise-D consortium

Kamiar Aminian, Anisoara Ionescu, Abolfazl Soltani

Background: Although digital mobility outcomes (DMOs) can be readily calculated from real-world data collected with wearable devices and ad-hoc algorithms, technical validation is still required. The aim of this paper is to comparatively assess and validat ...

BioMed Central2023

Neural Distributed Image Compression with Cross-Attention Feature Alignment

Ali Garjani

We consider the problem of compressing an information source when a correlated one is available as side information only at the decoder side, which is a special case of the distributed source coding problem in information theory. In particular, we consider ...

IEEE COMPUTER SOC2023

Design and Development of a Diagnostic System for a Non-Intercepting Direct Measure of the SPIDER Ion Source Beamlet Current

Basile Marie Jacques Pouradier Duteil

Stable and uniform beams with low divergence are required in particle accelerators; therefore, beyond the accelerated current, measuring the beam current spatial uniformity and stability over time is necessary to assess the beam performance, since these pa ...

MDPI2023

Hydrogen-sieving zeolitic films by coating zeolite nanosheets on porous polymeric support

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Mostapha Dakhchoune, Xuekui Duan

The synthesis of high-performance gas-sieving zeolitic film is challenging because it involves seeded secondary growth which is complex and difficult to reproduce. Additionally, expensive asymmetric inorganic porous supports are often needed for calcinatio ...

ELSEVIER2023

Investigation of nickel iron layered double hydroxide for water oxidation in different pH electrolytes

Michael Graetzel, Dan Ren, Lichen Bai

Nickel iron layered double hydroxide (NiFe LDH) is one of the best oxygen evolution reaction (OER) catalysts in alkaline electrolytes. However, it performs poorly in neutral electrolytes, and the detailed mechanism is still unclear. Herein, we introduce el ...

ELSEVIER2023

Uniaxial Cyclic and Tensile Tests on Structural Metallic Materials

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Selimcan Ozden

Experimental data is imperative to characterize the behavior of materials used in structural analysis models. The aim of this data paper is to establish a database of material-scale uniaxial experiments, primarily conducted at EPFL, to assist with simulati ...

ASCE-AMER SOC CIVIL ENGINEERS2023

Single-arm diagnostic electrocardiography with printed graphene on wearable textiles

Ata Jedari Golparvar

Stimulated by the COVID-19 outbreak, the global healthcare industry better acknowledges the necessity of innovating novel methods for remote healthcare monitoring and treating patients outside clinics. Here we report the development of two different types ...

ELSEVIER SCIENCE SA2023

Maximum likelihood estimation of distribution grid topology and parameters from Smart Meter data

Lisa Carole Françoise Laurent, Giancarlo Ferrari Trecate, Jean-Sébastien Hubert Brouillon

This paper defines a Maximum Likelihood Estimator (MLE) for the admittance matrix estimation of distribution grids, utilising voltage magnitude and power measurements collected only from common, unsychronised measuring devices (Smart Meters). First, we pre ...

IEEE2023

Atmospheric water harvesting in semi-arid regions by membranes: A techno-economic assessment

Kumar Varoon Agrawal, Marina Micari, Xuekui Duan

The availability of a reliable and sufficient amount of water constitutes one of the Sustainable Development Goals set by the United Nations. The provision of water is still challenging in many regions of the world, especially in arid and semi-arid regions ...

ELSEVIER2023

The role of the visual field size in artificial vision

Diego Ghezzi

Objective. Artificial vision has been and still is the subject of intense research. The ultimate goal is to help blind people in their daily life. Approaches to artificial vision, including visual prostheses and optogenetics, have strongly focused on resto ...

IOP Publishing Ltd2023