Controlling charge-transfer at the gate interface of organic field-effect transistors

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Synthesizing high-quality epitaxial BaTiO3 (BTO) by means of high-vacuum chemical vapor deposition (HV-CVD) requires a precise control over precursor fluxes impinging onto the heated substrate surface so that the incorporation rates of all elements corresp ...

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

The engineering of tin halide perovskites has led to the development of p-type transistors with field-effect mobilities of over 70 cm2 V-1 s-1. However, due to their background hole doping, these perovskites are not suitable for n-type transistors. Ambipol ...

Full-area passivating contacts based on SiOx/poly-Si stacks are key for the new generation of industrial silicon solar cells substituting the passivated emitter and rear cell (PERC) technology. Demonstrating a potential efficiency increase of 1 to 2% compa ...

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

Applications demanding imaging at low-light conditions at near-infrared (NIR) and short-wave infrared (SWIR) wavelengths, such as quantum information science, biophotonics, space imaging, and light detection and ranging (LiDAR), have accelerated the develo ...

The versatility of half-bridge configuration of silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module contributes to its widespread adoption, highlighting the popularity and significance of its corresponding dual gat ...

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

The escalating energy demand and the imperative necessity to reduce the carbon footprint require transformative approaches to energy conversion. Materials chemistry plays a pivotal role in addressing these global challenges by developing novel materials fo ...

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

We introduce a new family of single-photon avalanche diodes (SPADs) with enhanced depletion regions in a 55-nm Bipolar-CMOS-DMOS (BCD) technology. We demonstrate how to systematically engineer doping profiles in the main junction and in deep p-well layers ...

The construction industry has recently increased the adoption of additive manufacturing (AM, also known as 3D-printing) technologies. This review paper presents the state of the art of ground-based AM systems in construction, focusing comprehensively on de ...

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

We demonstrate the use of both pixelated differential phase contrast (DPC) scanning transmission electron microscopy (STEM) and off-axis electron holography (EH) for the measurement of electric fields and assess the advantages and limitations of each techn ...

2D van der Waals heterojunctions (vdWH) have emerged as an attractive platform for the realization of optoelectronic synaptic devices, which are critical for energy-efficient computing systems. Photogating induced by charge traps at the interfaces indeed r ...

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Interfacial space charges significantly influence transport and recombination of charge carriers in optoelectronic devices. Due to the mixed ionic-electronic conducting properties of halide perovskites, not only electronic effects, but also ionic interacti ...

Organic electrochemical transistors (OECTs) have gained enormous attention due to their potential for bioelectronics and neuromorphic computing. However, their implementation into real-world applications is still impeded by a lack of understanding of the c ...

The digital revolution has significantly transformed our world over the past decades, driven by the scaling of transistor dimensions and the exponential increase in computation power. However, as the CMOS scaling era approaches its end, the semiconductor i ...

Selective area epitaxy (SAE), applied to semiconductor growth, allows tailored fabrication of intricate structures at the nanoscale with enhanced properties and functionalities. In the field of nanowires (NWs), it adds scalability by enabling the fabricati ...

Controlling charge-transfer at the gate interface of organic field-effect transistors

Chat with Graph Search

High-quality epitaxial BaTiO3 films grown by high-vacuum chemical vapor deposition for integrated electro-optical devices

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Strain relaxation and multidentate anchoring in n-type perovskite transistors and logic circuits

Development and characterization of N2O-plasma oxide layers for high-temperature p-type passivating contacts in silicon solar cells

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Silicon CMOS and InGaAs(P)/InP SPADs for NIR/SWIR detection

Active Voltage Balancing with Seamless Integration into Dual Gate Driver for Series Connection of SiC MOSFETs

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Hybrid organic/metal-oxide shells on semiconductor nanocrystals via colloidal atomic layer deposition

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Doping Engineering for PDP Optimization in SPADs Implemented in 55-nm BCD Process

The rise of aerial additive manufacturing in construction: a review of material advancements

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Measuring electrical properties in semiconductor devices by pixelated STEM and off-axis electron holography (or convergent beams vs. plane waves)

Light-Intensity Switching of Graphene/WSe2 Synaptic Devices

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Modulation of Ionically Generated Space Charge Effects at Hybrid Perovskite and Oxide Interfaces via Surface Modification

Unraveling the Electrochemical Electrode Coupling in Integrated Organic Electrochemical Transistors

Energy-Efficient Electronic Functions Based on the Co-integration of 2D and Ferroelectric Materials

Growth and Doping Mechanisms of III-V Nanostructures by Selective Area Epitaxy