Publications related to Th1509U European 170 Ghz 1 Mw Cw Industrial Gyrotron Upgrade

Related publications (47)

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Error field detection and correction studies towards ITER operation

Olivier Sauter

In magnetic fusion devices, error field (EF) sources, spurious magnetic field perturbations, need to be identified and corrected for safe and stable (disruption-free) tokamak operation. Within Work Package Tokamak Exploitation RT04, a series of studies hav ...

IOP Publishing Ltd2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Alexander Karpushov, Yann Camenen, Benoît Labit, Antoine Pierre Emmanuel Alexis Merle, Olivier Claude Martin Février, Simon Van Mulders, Filippo Bagnato, Alessandro Pau, Matteo Vallar, Cassandre Ekta Contré, Stefano Marchioni, Oleg Krutkin, Reinart Andreas J. Coosemans

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Lithium-niobate-based narrow-linewidth frequency agile integrated lasers with petahertz frequency tuning rate

Rui Ning Wang, Tobias Kippenberg, Johann Emmeram Riemensberger, Junqiu Liu, Guanhao Huang, Mikhail Churaev, Anat Siddharth, Viacheslav Snigirev

We demonstrate an electro-optically tunable hybrid integrated laser self-injection locked to a mode of a heterogeneously integrated lithium-niobate-on-Damascene-silicon-nitride microresonator. An intrinsic linewidth of 3 kHz and a frequency tuning rate of ...

IEEE2023

Network Alignment With Holistic Embeddings

Quoc Viet Hung Nguyen, Thành Tâm Nguyên, Chi Thang Duong, Thanh Trung Huynh

Network alignment is the task of identifying topologically and semantically similar nodes across (two) different networks. It plays an important role in various applications ranging from social network analysis to bioinformatic network interactions. Howeve ...

IEEE COMPUTER SOC2023

From Nano to Macro An overview of the IEEE Bio Image and Signal Processing Technical Committee

Michael Stefan Daniel Liebling, Michaël Unser, Dimitri Nestor Alice Van De Ville

The Bio Image and Signal Processing (BISP) Technical Committee (TC) of the IEEE Signal Processing Society (SPS) promotes activities within the broad technical field of biomedical image and signal processing. Areas of interest include medical and biological ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Automatic Body Segment and Side Recognition of an Inertial Measurement Unit Sensor during Gait

Kamiar Aminian, Xavier Crevoisier, Mina Arabbaniasad, Robin Martin

Inertial measurement unit (IMU) sensors are widely used for motion analysis in sports and rehabilitation. The attachment of IMU sensors to predefined body segments and sides (left/right) is complex, time-consuming, and error-prone. Methods for solving the ...

MDPI2023

Upper part-load instability in a reduced-scale Francis turbine: an experimental study

François Avellan, Andres Müller, Elena Vagnoni, Ali Amini

Francis turbines with medium or high specific speeds may experience a particular type of instability in the upper part load in which the precessing vortex has an elliptical shape. The occurrence of the upper part-load instability (UPLI) is accompanied by l ...

SPRINGER2023

Reinforced polypyrrole with 2D graphene flakes decorated with interconnected nickel-tungsten metal oxide complex toward superiorly stable supercapacitor (vol 418, 129396, 2021)

Ulf Anders Hagfeldt

ELSEVIER SCIENCE SA2023

A new 3MW ECRH system at 105 GHz for WEST*

Stefano Alberti, Timothy Goodman, Jean-Philippe Hogge, Ioannis Pagonakis, François Jean Gaston Legrand

The aim of the WEST experiments is to master long plasma pulses (1000s) and expose ITER-like tungsten wall to deposited heat fluxes up to 10 MW/m2. To increase the margin to reach the H-Mode and to control W-impurities in the plasma, the installation of an ...

2023

Remote wide angle view broad wavelength viewing system compatible with D-T operations in JET

Gilles Arnoux, Paulo Giovane Paschoali Pereira Puglia

Imaging diagnostics in Joint European Torus have become essential in the study of plasma wall interactions and the protection of the plasma facing components. During deuterium operations, the location of these diagnostics was at close proximity to the vess ...

2023

Quantization for Decentralized Learning Under Subspace Constraints

Ali H. Sayed, Roula Nassif, Stefan Vlaski

In this article, we consider decentralized optimization problems where agents have individual cost functions to minimize subject to subspace constraints that require the minimizers across the network to lie in low-dimensional subspaces. This constrained fo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Wear behaviour of novel copper alloy as an alternative to copper-beryllium

Stefano Mischler, Anna Neus Igual Muñoz, Roland Logé, Baptiste Thomas Jean Rouxel

Copper beryllium age hardenable alloys (Cu-Be) are widely used and appreciated for combining exceptional mechanical and electrical properties. However, the toxicity of these alloys pushes the scientific community to develop alternative alloys. Cu-Ni-Sn all ...

ELSEVIER SCIENCE SA2023

Studies on EU-DEMO 3D coils requirements and conceptual design for error field correction and plasma control

Pierluigi Bruzzone

This work presents the initial studies on the requirements for the design of 3D coils on EU-DEMO. The use of 3D coils in present machines includes two main purposes: the first one is the Error Field Correction (EFC). The EFC aims at minimizing the intrinsi ...

Elsevier Science Sa2023

Towards a pattern language for complex-mode mission concept generation

Jeffrey Huang, Anne-Marlene Rüede, Jean-Paul Richard Kneib

New space mission profiles arise from the convergence of reduced launch prices, miniaturization of electronics and the maturation of on-orbit servicing technologies. Additionally, a shift towards challenging Lunar objectives pushes for interconnected and c ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Stability of black interconnect coatings for solar photovoltaic module applications

Christophe Ballif, Antonin Faes, Martin Ledinsky, Alessandro Francesco Aldo Virtuani, Alejandro Borja Block

Building-integrated photovoltaics (BIPV) are dual purpose, providing both energy and building functions. Aesthetics play a crucial role in the BIPV market, with increasing demand for uniformly colored modules for building skins. Achieving this requires hid ...

2023

Data Domotopia: introduction to the quantitative survey

Vincent Kaufmann, Luca Giovanni Pattaroni, Marc-Edouard Baptiste Grégoire Schultheiss, Guillaume Simon Joseph Drevon, Fiona Ines Del Puppo

This paper describes the Data Domotopia a 2300 + respondent self-administered webbased survey. It includes 100 + multi-purpose items about home-making and stillness in a moving world. We suppose that home-making can reveal coping strategies and resilience ...

2023

Tests and Qualification of the European 1 MW, 170 GHz CW Gyrotron in an ITER relevant configuration at SPC

Stefano Alberti, Timothy Goodman, Jean-Philippe Hogge, Francisco Sanchez, Jérémy Genoud

After an initial testing period at the Karlsruhe Institute of Technology, the upgraded EU 1 MW, 170 GHz continuous wave (CW) industrial prototype gyrotron (TH1509U) for Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) in ITER has been trans ...

IEEE2022