Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

Inertial measurement unit (IMU) sensors are widely used for motion analysis in sports and rehabilitation. The attachment of IMU sensors to predefined body segments and sides (left/right) is complex, time-consuming, and error-prone. Methods for solving the ...

The seismic assessment of existing steel structures necessitates the development of practice- oriented engineering models for use in nonlinear static and dynamic analysis procedures. These models should encompass the full range of the anticipated nonlinear ...

We demonstrate an electro-optically tunable hybrid integrated laser self-injection locked to a mode of a heterogeneously integrated lithium-niobate-on-Damascene-silicon-nitride microresonator. An intrinsic linewidth of 3 kHz and a frequency tuning rate of ...

Recent seismic events have showcased the vulnerability of non-structural components to even low- or moderate-intensity earthquakes that occur far more frequently than design-basis ones. Thus, community-critical buildings, such as hospitals, telecommunicati ...

In capacity designed steel moment resisting frames (MRFs), beam-to-column joints (i.e., panel zones) are designed to remain elastic. To potentially exploit the beneficial aspects of the stable panel zone hysteretic response in shear, a robust panel zone mo ...

The current practice in capacity-designed steel moment resisting frames (MRFs) worldwide allows for limitedshear yielding in the column web panel zone. As such, inelastic deformations concentrate near the beam ends, thereby leading to flexural stre ...

Francis turbines with medium or high specific speeds may experience a particular type of instability in the upper part load in which the precessing vortex has an elliptical shape. The occurrence of the upper part-load instability (UPLI) is accompanied by l ...

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

Nonlinear continuum finite element (CFE) analyses rely on accurate multiaxial constitutive law formulations along with reliable imperfection patterns for simulating nonlinear geometric instabilities in steel members under mechanical loading. Validations of ...

The medium-voltage grid emulator is gaining popularity for testing grid-code compliance of large-capacity converters for renewable energy resources. The cascaded H-bridge converter based on active-front-ends is a promising candidate for high-power grid emu ...

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

The Poisson-Nernst-Planck equations have been used to model species transport in electrochemical CO2 reduction, where the surface charge boundary condition accounts for the potential drop across the Stern layer. A direct comparison of the published models ...

This paper discusses the cyclic performance of a heavily instrumented 2-bay full-scale composite-steel moment resisting frame (CMRF) sub-system from the onset of structural damage up until incipient collapse. The CMRF featured stiffened end plate bolted co ...

This paper presents an output capacitor-less low-dropout regulator (LDO) with a bias switching scheme for biomedical applications with dual-range load currents. Power optimization is crucial for systems with multiple activation modes such as neural interfa ...

Copper beryllium age hardenable alloys (Cu-Be) are widely used and appreciated for combining exceptional mechanical and electrical properties. However, the toxicity of these alloys pushes the scientific community to develop alternative alloys. Cu-Ni-Sn all ...

Thermoelectric conversion remains an active research field in light of its potential to enhance energy efficiency by waste heat recovery in a noise and wear-free manner. Nanostructuring is responsible for most of the recently reported improvements of the ...

New space mission profiles arise from the convergence of reduced launch prices, miniaturization of electronics and the maturation of on-orbit servicing technologies. Additionally, a shift towards challenging Lunar objectives pushes for interconnected and c ...

Fibre-reinforced polymers (FRP) strengthening can be applied to decrease the seismic vulnerability of existing masonry buildings, both with regard to in-plane and out-of-plane failure mechanisms. Experimentally, the impact of strengthening solutions has be ...

Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols

Chat with Graph Search

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Automatic Body Segment and Side Recognition of an Inertial Measurement Unit Sensor during Gait

The new Chapter 9 of Eurocode 8 Part 3 for Seismic Assessment of Existing Steel Structures

Reinforced polypyrrole with 2D graphene flakes decorated with interconnected nickel-tungsten metal oxide complex toward superiorly stable supercapacitor (vol 418, 129396, 2021)

Lithium-niobate-based narrow-linewidth frequency agile integrated lasers with petahertz frequency tuning rate

The use of ductile steel fuses for the seismic protection of acceleration sensitive non- structural components: Numerical and Experimental verification

Proposed Panel Zone Model for Beam-To-Column Joints in Steel Moment Resisting Frames

Hysteretic behaviour of welded connections with highly inelastic panel zones

Upper part-load instability in a reduced-scale Francis turbine: an experimental study

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Digital-Image-Correlation for Simulating Cyclic Local Buckling in Steel Beams

Dc-Link Ripple Suppression of Cascaded H-Bridge Based MV Grid Emulator Apparatus for Analysis and Testing of Grid-Tied Converters in Distribution System

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Surface Charge Boundary Condition Often Misused in CO2 Reduction Models

Full Scale Experiments of a Composite Steel Moment Resisting Frame: Behavioral Insights and Implications on Seismic Design

A 0.21-ps FOM Capacitor-Less Analog LDO with Dual-Range Load Current for Biomedical Applications

Wear behaviour of novel copper alloy as an alternative to copper-beryllium

Investigation of thermoelectric nanomaterials

Towards a pattern language for complex-mode mission concept generation

Equivalent Frame Models for FRP-Strengthened Masonry Buildings