Publications related to Bulk-source-coupled CMOS Quadrature Oscillators

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Toward Band n78 Shear Bulk Acoustic Resonators Using Crystalline Y-Cut Lithium Niobate Films With Spurious Suppression

Victor Plessky, Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli

This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...

Institute of Electrical and Electronics Engineers2023

Cavity-Mediated Coupling of Terahertz Antiferromagnetic Resonators

Jean-Philippe Ansermet, Marcin Bialek

Coupling of space-separated resonators is interesting for quantum and communication technologies. In this work, we show that antiferromagnetic resonance in separated parallel-plane slabs of hematite (alpha-Fe2O3) couple cooperatively to terahertz electroma ...

American Physical Society (APS)2023

Nanomechanical resonators with low dissipation for quantum optomechanics

Alberto Beccari

Fields of technology as diverse as microwave filter construction, characterization of material interfaces with atomic precision, and detection of gravitational waves from astronomical sources employ mechanical resonators at their core. The utility of mecha ...

EPFL2023

Single Chip Dynamic Nuclear Polarization Microsystems

Nergiz Sahin Solmaz

Nuclear magnetic resonance (NMR) methods are powerful tools employed in many fields, including physics, chemistry, material science, biology, and medicine. The use of NMR methodologies in an even wider range of applications is often hindered by the relativ ...

EPFL2023

Methods for Calibrating the Electrochemical Quartz Crystal Microbalance: Frequency to Mass and Compensation for Viscous Load

Stefano Mischler, Anna Neus Igual Muñoz

The main output from an Electrochemical Quartz Crystal Microbalance is a frequency shift. This note describes how to separate the mass- and viscous load contributions to this shift by a calibration procedure. The mass calibration is made by electroplating ...

MDPI2023

Resonators with tailored optical path by cascaded-mode conversions

Ileana-Cristina Benea-Chelmus, Marco Piccardo

Optical resonators enable the generation, manipulation, and storage of electromagnetic waves. The physics underlying their operation is determined by the interference of electromagnetic waves, giving rise to the resonance spectrum. This mechanism causes th ...

Nature Portfolio2023

Fab-to-fab and run-to-run variability in 130 nm and 65 nm CMOS technologies exposed to ultra-high TID

Jean-Michel Sallese, Adil Koukab, Stefano Michelis, Gennaro Termo

The discovery of a large fab-to-fab variability in the TID response of the CMOS technologies used in the design of ASICs for the particle detectors of the HL-LHC triggered a monitoring effort to verify the consistency of the CMOS production process over ti ...

IOP Publishing Ltd2023

500 MHz high resolution proximity sensors with fully integrated digital counter

Giovanni Boero, Nergiz Sahin Solmaz, Reza Farsi

We report on the design and characterization of two inductive proximity sensors based on LC oscillators operating at 500 MHz. The distance from the target is obtained by measuring the oscillation frequency variation. Both sensors contain an off-chip LC res ...

ELSEVIER SCI LTD2023

Optimization of Edge Profile for Improved Anti-Resonance Quality Factor in Lithium Niobate SH0 Resonators

Luis Guillermo Villanueva Torrijo, Silvan Stettler

Thin-film lithium niobate (LNO) has been identified as a promising material platform for enabling high electromechanical coupling and low-loss piezoelectric resonators for filtering applications. In this work, the design and fabrication of fundamental shea ...

IEEE2022

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

Exploring negative capacitance and neuromorphic devices based on CMOS-compatible ferroelectric HfO2

Carlotta Gastaldi

Ferroelectric materials are explored for numerous applications thanks to their properties associated with electrically switchable spontaneous polarization. Perovskites are an established class of ferroelectrics used for sensors and actuators. However, they ...

EPFL2022

Electrical Spectroscopy of Defect States in Synthetic 2D Materials

Yanfei Zhao

Two-dimensional (2D) materials such as graphene and transition metal dichalcogenide (TMDC) are considered as one of the most promising material platforms for future electronic devices, due to their ultra-thin thickness and fascinating electrical and optica ...

EPFL2022

Edge-Contact MoS2 Transistors Fabricated Using Thermal Scanning Probe Lithography

Giovanni Boero, Jürgen Brugger, Xia Liu, Ana Conde Rubio

The science and engineering of two-dimensional materials (2DMs), in particular, of 2D semiconductors, is advancing at a thriving pace. It is well known that these delicate few-atoms thick materials can be damaged during the processing toward their integrat ...

2022

On the Modeling of Organic Electrochemical Transistors

Matteo Cucchi

Due to their synaptic functionality based on interacting electronic and ionic charge carriers, organic electrochemical transistors (OECTs) appeal as highly attractive candidates for a new generation of organic neuromorphic devices. Despite their acknowledg ...

SPIE-INT SOC OPTICAL ENGINEERING2022

Utilizing XMG-based Synthesis to Preserve Self-Duality for RFET-Based Circuits

Giovanni De Micheli, Heinz Riener, Alessandro Tempia Calvino, Shubham Rai, Akash Kumar

Individual transistors based on emerging reconfigurable nanotechnologies exhibit electrical conduction for both types of charge carriers. These transistors (referred to as Reconfigurable Field-Effect Transistors (RFETs)) enable dynamic reconfiguration to d ...

2022

Energy Efficient Sensing using Steep Slope Devices

Teodor Rosca

Today, we are witnessing the Internet of Things (IoT) revolution, which facilitates and improves our lives in many aspects, but comes with several challenges related to the technology deployment at large scales. Handling ever growing amounts of information ...

EPFL2022

LiNiO Junction Gate for High-performance Enhancement-mode GaN Power Transistor

Taifang Wang

GaN metal-oxide-semiconductor high electron mobility transistors (MOS)HEMTs) offer outstanding properties for next-generation power electronics devices. The high conductivity, high voltage blocking capability, high operation frequency, and device-level int ...

EPFL2022

A Cryogenic Broadband Sub-1-dB NF CMOS Low Noise Amplifier for Quantum Applications

Edoardo Charbon, Andrea Ruffino, Yatao Peng

A cryogenic broadband low noise amplifier (LNA) for quantum applications based on a standard 40-nm CMOS technology is reported. The LNA specifications are derived from the readout of semiconductor quantum bits at 4.2 K, whose quantum information signals ar ...

2021

Adaptive Body Biasing in Strong Body Factor Technologies

Thomas Christoph Müller

With the advent of intelligent sensor nodes in everyday life, low power aspects of system design become more and more important. Adaptive body biasing is a promising methodology to achieve dynamic adaptation of the tradeoff between performance and energy b ...

EPFL2021