Home

Person

Mohammad Khaja Nazeeruddin

About
Privacy
Disclaimer

Graph Chatbot

Related publications (824)

Page 3 of 42

Enhancing Algae Biomass Production by Using Dye-Sensitized Solar Cells as Filters

Mohammad Khaja Nazeeruddin, Christian Ludwig, Peng Qin, Eya Nicodeme, Shivom Sharma

One of the most promising options for decreasing the costs of microalgae production is enhancing the production and reducing the energy demand of the culturing systems and the high surface area requirements. Because microalgae growth requires only specific ...

2021

Investigation of electrodeposited cobalt sulphide counter electrodes and their application in next-generation dye sensitized solar cells featuring organic dyes and cobalt-based redox electrolytes

Michael Graetzel, Mohammad Khaja Nazeeruddin, Thomas Moehl, Julien Edouard Frey, Simon Mathew

Cobalt sulphide (CoS) films are potentiodynamically deposited on fluorine-doped tin oxide (FTO) coated glass substrates employing one, three and five sweep cycles (CoS-I, CoS-III and CoS-V respectively). Analysis of the CoS-III film by impedance spectrosco ...

Elsevier Science Bv2015

Halide exchange in the passivation of perovskite solar cells with functionalized ionic

Mohammad Khaja Nazeeruddin, Rosario Scopelliti, Paul Joseph Dyson, Zhaofu Fei, Farzaneh Fadaei Tirani, Andreas Züttel, Yi Zhang, Wen Luo, Hiroyuki Kanda, Mousa Abdulla M E Abuhelaiqa, Mo Li, Bin Ding

Applying additives to perovskite precursor solutions is an effective way to passivate perovskite films for the construction of perovskite solar cells (PSCs) with increased power-conversion efficiencies (PCEs) and enhanced stabilities. Ionic liquids (ILs) w ...

ELSEVIER2022

Molecular materials as interfacial layers and additives in perovskite solar cells

Mohammad Khaja Nazeeruddin, Tom Theodorus Antonius Lummen

Solar cells based on organo-metal halide perovskites have gained unprecedented research interest over the last few years due to their low-cost solution processability, high power conversion efficiency, which has recently reached a certified value of 25.2%, ...

Royal Society of Chemistry2020

Meso-Substituted Porphyrins for Dye-Sensitized Solar Cells

Michael Graetzel, Mohammad Khaja Nazeeruddin

Among the several approaches for harnessing solar energy and converting it into electricity, dye-sensitized solar cells (DSSC) represent one of the most promising methods for future large-scale power production from renewable energy sources. In these cells ...

Amer Chemical Soc2014

All that glitters is not gold: Recent progress of alternative counter electrodes for perovskite solar cells

Mohammad Khaja Nazeeruddin, Peng Gao, Peng Gao, Xing Li

Although ultrahigh power conversion efficiency (PCE) up to 22.7% has been achieved by solution-processable perovskite solar cells (PSCs), there are still some obstacles that hinder the way of this promising photovoltaic technology to its commercialization. ...

Elsevier2018

CdSe quantum dot-sensitized solar cells exceeding efficiency 1% at full-sun intensity

Michael Graetzel, Mohammad Khaja Nazeeruddin, Shaik Mohammed Zakeeruddin, Peter Chen, Jun Ho Yum

Colloidal cadmium selenide (CdSe) quantum dots QDs) have been prepared and exploited as inorganic dyes to sensitize a large-band-gap TiO2 layer for QD-sensitized solar cells. The optimized QD-sensitized solar cells exhibited an unprecedented incident photo ...

2008

Molecular Engineering of a Fluorene Donor for Dye-Sensitized Solar Cells

Michael Graetzel, Jacques-Edouard Moser, Mohammad Khaja Nazeeruddin, Robin Humphry-Baker, Joël Teuscher, Ursula Röthlisberger, Ivano Tavernelli, Basile Curchod, Negar Ashari Astani, Aswani Yella, Julien Edouard Frey, Simon Mathew, Lauren Elizabeth Polander

To improve their efficiency beyond the state-of-the-art, D-pi-A dyes must display increased spectral breadth and account for the physical limitations observed in the dye. sensitized solar cells. In particular, they should be designed to control the electro ...

Amer Chemical Soc2013

First-Principles Modeling of Mixed Halide Organometal Perovskites for Photovoltaic Applications

Michael Graetzel, Mohammad Khaja Nazeeruddin

We computationally investigate organometal CH3NH3PbX3 and mixed halide CH3NH3PbI2X perovskites (X = Cl, Br, I), which are key materials for high efficiency solid-state solar cells. CH3NH3PbX3 perovskites exhibited the expected absorption blue shift along t ...

American Chemical Society2013

Mixed Dimensional 2D/3D Hybrid Perovskite Absorbers: The Future of Perovskite Solar Cells?

Mohammad Khaja Nazeeruddin, Anurag Krishna

The cost-effective processability and high efficiency of the organic-inorganic metal halide perovskite solar cells (PSCs) have shown tremendous potential to intervene positively in the generation of clean energy. However, prior to an industrial scale-up pr ...

WILEY-V C H VERLAG GMBH2019

Ultrafast charge transfer through p-oligo(phenylene) bridges: effect of nonequilibrium vibrations

Serge Pelet, Bernard Wenger, Pascal Comte, Michael Graetzel, Jacques-Edouard Moser, Mohammad Khaja Nazeeruddin, Shaik Mohammed Zakeeruddin, Joël Teuscher, Christophe Bauer

Electron transfers (ET) between a donor (D) and an acceptor (A) through a molecular bridge (B) are of great importance in biological systems, molecular electronics and molecular based light-energy conversion systems. Here, the back and the forward electron ...

Current Science Assoc // Indian Academy of Sciences2010

Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Nickel oxide (NiOx)-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial r ...

Wiley2024

Dimensionally Engineered Perovskite Heterostructure for Photovoltaic and Optoelectronic Applications

Mohammad Khaja Nazeeruddin, Yonghui Lee, Kyung Taek Cho, Sanghyun Paek

Although 2D|3D has shown potential for application in multifunctional devices, the principle of operation for multifunction devices (SOLAR Cell-LED: SOLED) has not yet been revealed. However, most studies have reported that the devices have only one auspic ...

2019

Crack-Free Monolayer Graphene Interlayer for Improving Perovskite Crystallinity and Energy Level Alignment in Efficient Inverted Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Kumar Varoon Agrawal, Shiqi Huang, Hiroyuki Kanda, Yen-Cheng Liu

Inverted planar perovskite solar cells (PSCs) have intrigued great promise in negative hysteresis, simple fabrication process, and flexible substrate implementation, in which the shared hole transport materiel is NiOx. However, the low-temperature solution ...

WILEY-V C H VERLAG GMBH2022

Light Harvesting and Charge Recombination in CH3NH3PbI3 Perovskite Solar Cells Studied by Hole Transport Layer Thickness Variation

Michael Graetzel, Mohammad Khaja Nazeeruddin, Shaik Mohammed Zakeeruddin, Robin Humphry-Baker, Mohammad Ibrahim Dar, Nevena Vaskova Marinova, Wolfgang Richard Tress

A tailored optimization of perovskite solar cells requires a detailed understanding of the processes limiting the device efficiency. Here, we study the role of the hole transport layer (HTL) spiro-MeOTAD and its thickness in a mesoscopic TiO2-based solar c ...

American Chemical Society2015

Investigation of Potential-Induced Degradation and Recovery in Perovskite Minimodules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson

Potential-induced degradation (PID) is a prevalent concern in current commercial photovoltaic technologies, impacting their reliability, with the mechanistic basis for PID in perovskite photovoltaic technologies being poorly understood. Here, we investigat ...

2024

Two in One: A Dinuclear Ru(II) Complex for Deep-Red Light-Emitting Electrochemical Cells and as an Electrochemiluminescence Probe for Organophosphorus Pesticides

Mohammad Khaja Nazeeruddin

The emissive properties of two Ru(II) complexes, [Ru(dmbipy)(2)L-1]PF6 (1) and [Ru-2(dmbipy)(4)L-2]PF6 (2), (where L-1 and L-2 are pi-extended phenanthroline-based ligands and dmbipy = 4,4'-dimethyl-2,2'-bipyridine) have been explored for dual ap ...

AMER CHEMICAL SOC2021

The reorganization energy of intermolecular hole hopping between dyes anchored to surfaces

Mohammad Khaja Nazeeruddin

We measured the rate of hole hopping between dye molecules on titanium dioxide nanocrystals using cyclic voltammetry. Dyes commonly used in the field of dye sensitized solar cells exhibited efficient intermolecular charge transport, showing apparent diffus ...

Royal Soc Chemistry2014

Robust Interfacial Modifier for Efficient Perovskite Solar Cells: Reconstruction of Energy Alignment at Buried Interface by Self-Diffusion of Dopants

Mohammad Khaja Nazeeruddin, Jianxing Xia

The under-coordinated defects within perovskite and its relevant interfaces always attract and trap the free carriers via the electrostatic force, significantly limiting the charge extraction efficiency and the intrinsic stability of perovskite solar cells ...

WILEY-V C H VERLAG GMBH2022

The emergence of concentrator photovoltaics for perovskite solar cells

Mohammad Khaja Nazeeruddin

The emergence of high-efficiency photovoltaic research is undergoing intense study and is technologically desirable to meet sustainable energy and environmental demand. However, every single solar cell has a theoretical power conversion efficiency limit, a ...

AIP Publishing2021