Lecture

Large-area sensors: X-ray Detection

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

MICRO-566: Large-area electronics: devices and materials

Introduction to the physical concepts involved in the description of optical and electronic transport properties of thin-film semiconductor materials found in many large-area applications (solar cells, displays, imagers, etc) and introduction to the physic ...

Description

This lecture covers the principles and technologies behind large-area sensors for X-ray detection, including direct and indirect detection methods using semiconductor diodes and scintillators. It discusses the performance metrics of various X-ray detectors, such as conversion efficiency and refractive index. The lecture also explores the use of a-Se and CdTe as direct conversion materials, as well as the application of perovskites for enhanced X-ray sensitivity. Additionally, it delves into the design and integration of active matrix flat panel imagers for radiography, highlighting the advantages of a-Si:H and a-Se based detectors for different imaging modalities.

Instructors (2)

Christophe Ballif

Christophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.

Franz-Josef Haug

I studied Physics between 1990 and 1996 at the Universities of Ulm (Germany) and Waikato (New Zealand). While specializing mostly on Theoretical Physics and Quantum Theory during my studies, I turned towards Experimental Physics for a graduate work on gas-phase epitaxy of silicon. After that, I pursued a PhD program at ETH Zürich (Switzerland), studying Cu(In,Ga)Se2 solar cells. As PostDoc, I went to EMPA (Switzerland) to work on plasma processes for hard coatings of TiN and to the Jülich Research Centre in Germany to study light scattering ZnO front contacts for solar cells. In 2005 I joined the Institute of Microengineering (IMT) at the University of Neuchatel to lead a research group on thin film silicon solar cells within the PV-Lab. In 2009 the IMT was integrated into EPFL. My main research interests are optics, charge transport in semiconductors and renewable energy in general. My current work is devoted to passivating contacts for crystalline silicon solar cells, using thin silicon films as contact layers. In 2015 I was appointed Maitre d'Enseignement et Recherche (Senior Lecturer and Scientist) and member of the Faculty of STI. From 2013 to 2015 I was member of the EFPL Teachers Council (CCE) and from 2016 and 2018 I was elected into the Council of the Engineering School (CF-STI). In 2020 I was elected to become a member of CF-STI. My main objective for the legislature is to represent the role of EPFL's intermediate staff and to raise the awareness for concerns of the satellite campuses.

Official source

Ontological neighbourhood

Health sciences

Radiology: Topics in radiology

Related concepts (32)

Radiography

Radiography is an imaging technique using X-rays, gamma rays, or similar ionizing radiation and non-ionizing radiation to view the internal form of an object. Applications of radiography include medical radiography ("diagnostic" and "therapeutic") and industrial radiography. Similar techniques are used in airport security (where "body scanners" generally use backscatter X-ray). To create an image in conventional radiography, a beam of X-rays is produced by an X-ray generator and is projected toward the object.

Projectional radiography

Projectional radiography, also known as conventional radiography, is a form of radiography and medical imaging that produces two-dimensional images by X-ray radiation. The image acquisition is generally performed by radiographers, and the images are often examined by radiologists. Both the procedure and any resultant images are often simply called 'X-ray'. Plain radiography or roentgenography generally refers to projectional radiography (without the use of more advanced techniques such as computed tomography that can generate 3D-images).

Digital radiography

Digital radiography is a form of radiography that uses x-ray–sensitive plates to directly capture data during the patient examination, immediately transferring it to a computer system without the use of an intermediate cassette. Advantages include time efficiency through bypassing chemical processing and the ability to digitally transfer and enhance images. Also, less radiation can be used to produce an image of similar contrast to conventional radiography. Instead of X-ray film, digital radiography uses a digital image capture device.

X-ray detector

X-ray detectors are devices used to measure the flux, spatial distribution, spectrum, and/or other properties of X-rays. Detectors can be divided into two major categories: imaging detectors (such as photographic plates and X-ray film (photographic film), now mostly replaced by various digitizing devices like s or flat panel detectors) and dose measurement devices (such as ionization chambers, Geiger counters, and dosimeters used to measure the local radiation exposure, dose, and/or dose rate, for example, for verifying that radiation protection equipment and procedures are effective on an ongoing basis).

Dental radiography

Dental radiographs, commonly known as X-rays, are radiographs used to diagnose hidden dental structures, malignant or benign masses, bone loss, and cavities. A radiographic image is formed by a controlled burst of X-ray radiation which penetrates oral structures at different levels, depending on varying anatomical densities, before striking the film or sensor. Teeth appear lighter because less radiation penetrates them to reach the film.

Related lectures (64)

X-ray Detection Technologies

Explores X-ray detection technologies, including semiconductor diodes and scintillators, for applications in cancer cell imaging and particle detection.

Enhancing and Shaping Radiation from High-Energy Particles with Nanophotonics

Delves into enhancing and tailoring radiation from high-energy particles using nanophotonic structures.

Gamma and Neutron Radiography

Explores the historical development and industrial applications of radiography and computerized tomography with X-rays, gammas, and neutrons.

X-ray Tomography: Principles and Applications

Explores x-ray tomography principles, including generation, interaction with matter, detection methods, and practical examples.