Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Polyethylene

Related publications (31)

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

Marianne Liebi, Manuel Guizar Sicairos

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Sustainable, recyclable and biodegradable castor oil-derived elastomers enabled by dynamic acetoacetyl formed amides

Youwei Ma

Developing sustainable, recyclable, and biodegradable elastomers with the mechanical properties comparable to commercial polymers presents a formidable challenge. To this end, we synthesize a kind of mechanically robust elastomers cross -linked by acetoace ...

Elsevier Science Sa2024

A comprehensive review on geomembrane systems application in hydropower

Giovanni De Cesare, Samuel Luke Vorlet

Geomembrane systems have been used at hydropower plants as rehabilitation and mitigation technology for several decades and are now used worldwide. In the context of planning an energy transition that promotes the sustainable use of water resources for ene ...

2024

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Electrospun zein incorporating phycocyanin and Spirulina extract: Fabrication, characterization, and potential application

Niloufar Sharif

Electrospinning was used to develop zein fibers containing phycocyanin and aqueous-ethanolic extract of Spirulina (AEES) for elucidating the potent packaging properties of phycocyanin and AEES on walnut samples. Morphological results revealed that using th ...

Elsevier2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

From Surfactants to Viscoelastic Capsules

Esther Amstad, Gaia De Angelis

Micrometer sized capsules are often used as single entities for the encapsulation and release of active ingredients, for example in food, cosmetics, and drug delivery. Important parameters that determine the stability of capsules and the release of reagent ...

WILEY2023

Selectively permeable microcapsules

Chuen-Ru Li

Microcapsules are appealing containers for delivering active ingredients, such as drugs and cosmetics, or conducting chemical and biological reactions on a small scale. To control the timing and location of release of these encapsulants, the shells of micr ...

EPFL2023

The effect of storage conditions on the long-term stability of ethylene-vinyl-acetate (EVA) copolymer used in glass/glass modules

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Eleonora Annigoni, Andrew Wayne Fairbrother, Luca Gnocchi

We evaluate the effect of storage conditions of uncured encapsulant rolls and the potential consequences on photovoltaic (PV) module performance. We show the impact of residual water trapped inside laminated double glass PV modules after lamination and dur ...

ELSEVIER2023

Polyethylene wear of dual mobility cups: a comparative analysis based on patient-specific finite element modeling

Alexandre Terrier, Ehsan Sarshari, Matthieu Boubat

Purpose Concerns remain about potential increased wear with dual mobility cups related to the multiple articulations involved in this specific design of implant. This finite element analysis study aimed to compare polyethylene (PE) wear between dual mobili ...

SPRINGER2022

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts

Véronique Michaud, Yves Leterrier, Adrien Julien Demongeot, Joanne Hélène Vaucher-Joset

As part of a project that aims to provide people with disabilities with simple assistive devices in Colombia, the possibility of creating a PET filament that can be printed by Fused Deposition Modelling (FDM) from beverage bottle waste was investigated, wi ...

MDPI2022

Tandem effect of Ag@C@Cu catalysts enhances ethanol selectivity for electrochemical CO2 reduction in flow reactors

Andreas Züttel, Wen Luo, Liping Zhong, Thi Ha My Pham, Mo Li, Jie Zhang, Youngdon Ko, Cedric David Koolen

CO-selective metals (e.g., Ag) on Cu catalysts improve the selec-tivity of multi-carbon (C2+) products in electrochemical CO2 reduc-tion. However, the origin of the improvement remains unclear due to the convolution of tandem and interface effects. Here, A ...

ELSEVIER2022

Tandem electrocatalytic CO2 reduction with Fe-porphyrins and Cu nanocubes enhances ethylene production

Raffaella Buonsanti, Anna Loiudice, Min Wang

Copper-based tandem schemes have emerged as promising strategies to promote the formation of multi-carbon products in the electrocatalytic CO2 reduction reaction. In such approaches, the CO-generating component of the tandem catalyst increases the local co ...

ROYAL SOC CHEMISTRY2022

Copper-Phosphonate Lamella Intermediates Control the Shape of Colloidal Copper Nanocrystals

Raffaella Buonsanti, Jan Vávra, Dragos-Constantin Stoian, Valeria Mantella, Petru Pasquale Albertini, James Richard Pankhurst

Understanding the structure and behavior of intermediates in chemical reactions is key to developing greater control over the reaction outcome. This principle is particularly important in the synthesis of metal nanocrystals (NCs), where the reduction, nucl ...

2022

Development of C-C and C-O bond cleavage catalysts for the depolymerization of plastics

Wei-Tse Lee

Chemical recycling of plastics provides more flexibility for materials circulation than landfill disposal or incineration. Intensive research efforts have been devoted to maximizing the efficiency of chemical recycling through catalyst development. The fro ...

EPFL2022

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021