Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Medium-density polyethylene

Related publications (27)

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

Marianne Liebi, Manuel Guizar Sicairos

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021

Effects of Anthropogenic Discharge and Hydraulic Deposition on the Distribution and Accumulation of Microplastics in Surface Sediments of a Typical Seagoing River: The Haihe River

Florian Frédéric Vincent Breider

Microplastics pollution in river systems has generated great concern; however, few studies have focused on the contributions of multiple influencing factors to microplastics in river systems. In the current study, we utilized data on microplastics in surfa ...

2020

Investigation and modeling of odors release from membrane holes on daily overlay in a landfill and its impact on landfill odor control

Sami Rtimi

In the present work, we studied the NH(3)and H2S odor fluxes between the exposed working area and the HDPE covering film holes of the daily overlay in an actual landfill site with a daily operating area of 1600 m(2)in Hangzhou, China. We showed that the od ...

2021

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020

Extracellular bacterial inactivation proceeding without Cu-ion release: Drastic effects of the applied plasma energy on the performance of the Cu-polyester (PES) samples

Sami Rtimi, Michaël Bensimon

The widely different effects of Cu-polyester (PES) sputtered by high power impulse magnetron sputtering (HIPIMS) compared to the lower energy direct current magnetron sputtering (DCMS) leading to bacterial inactivation are addressed during the course of th ...

ELSEVIER SCIENCE BV2018

Supported photocatalysts for model pollutant degradation and bacterial inactivation : preparation, evaluation and characterization

Laura Victoria Suárez Murillo

Water quality and bacterial infections are directly related to human health and wellbeing, thus waste water treatment is a necessary procedure for avoiding disturbances to ecosystems and for assuring human health. Furthermore, bacterial contamination in wa ...

EPFL2017

An in-situ assessment of low-density polyethylene and silicone rubber passive samplers using methods with and without performance reference compounds in the context of investigation of polychlorinated biphenyl sources in rivers

Luiz Felippe De Alencastro, Nicolas Estoppey, Adrien Schopfer

This study firstly aims to assess the field performances of low density polyethylene (LDPE) and silicone rubber (SR) samplers for the monitoring of polychlorinated biphenyls (PCBs) in water regarding the uptake, the sam- pling rate (RS) estimated by using ...

Elsevier Science Bv2016

Comparative Results From a National Joint Registry Hip Data Set of a New Cross-Linked Annealed Polyethylene vs Both Conventional Polyethylene and Ceramic Bearings

Brigitte Jolles-Haeberli

Background: Major concerns in hip arthroplasty concern the fate of bearing surfaces. Highly cross-linked polyethylene materials (HXLPE) currently demonstrate successful in vitro results with new technical procedures of cross-linking the polyethylene materi ...

2016

Low density polyethylene (LDPE) passive samplers for the investigation of PCB point sources in rivers

Luiz Felippe De Alencastro, Julien Omlin, Nicolas Estoppey, Adrien Schopfer

This study aims to provide a passive sampling approach which can be routinely used to investigate polychlorinated biphenyl (PCB) sources in rivers. The approach consists of deploying low density polyeth- ylene (LDPE) strips downstream and upstream of poten ...

Pergamon-Elsevier Science Ltd2015

The Use of Passive Samplers to Reveal Industrial and Agricultural Pollution Trends in Swiss Rivers

Luiz Felippe De Alencastro, Julien Omlin, Nicolas Estoppey, Adrien Schopfer

This study shows the efficiency of passive sampling to reveal industrial and agricultural pollution trends. Two practical applications for nonpolar and polar contaminants are presented. Low-density polyethylene (LDPE) samplers were deployed for one year in ...

Schweizerische Chemische Gesellschaft2014

Effect of water velocity on the uptake of polychlorinated biphenyls (PCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers. An assessment of the efficiency of performance reference compounds (PRCs) in river-like flow conditions

Luiz Felippe De Alencastro, Julien Omlin, Nicolas Estoppey, Adrien Schopfer

One aim of this study is to determine the impact of water velocity on the uptake of indicator polychlorinated biphenyls (iPCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers. A second aim is to assess the efficiency of perfor ...

Elsevier Science Bv2014

Hydrophobic Meshes for Oil Spill Recovery Devices

Francesco Stellacci

Widespread use of petrochemicals often leads to accidental releases in aquatic environments, occasionally with disastrous results. We have developed a hydrophobic and oleophilic mesh that separates oil from water continuously in situ via capillary action, ...

Amer Chemical Soc2013

A theoretical quantification of the possible improvement in the mechanical properties of carbon nanotube bundles by carbon ion irradiation

William Curtin

Improvement of single wall carbon nanotube (CNT) bundle mechanical properties through carbon ion irradiation is investigated using molecular dynamics. Increased inter-tube shear and toughness properties through formation of inter-tube cross-links is balanc ...

Elsevier2013

Importance of polyethylene thickness in total shoulder arthroplasty: A finite element analysis

Dominique Pioletti, Alexandre Terrier, Alain Farron

Background: Articular surfaces reconstruction is essential in total shoulder arthroplasty. Because of the limited glenoid bone support, thin glenoid component could improve anatomical reconstruction, but adverse mechanical effects might appear. Methods: Wi ...

Elsevier2012

UV-cured Epoxy for Adhesion in Steel Reinforced Thermoplastic Composites

Basile Golaz

This work addresses the development of composite materials that contain metallic load-bearing cords with the aim of combining outstanding mechanical performance with added functionality, including electrical conductivity, data transmission, and temperature ...

EPFL2012

Microcrystalline silicon solar cells: effect of substrate temperature on cracks and their role in post-oxidation

Christophe Ballif

Microcrystalline silicon (mc-Si:H) cells can reach efficiencies up to typically 10% and are usually incorporated in tandem micromorph devices. When cells are grown on rough substrates, ‘‘cracks’’ can appear in the mc-Si:H layers. Previous works have demons ...

2010

Comparison of polyethylene wear in anatomical and reversed shoulder prostheses

Dominique Pioletti, Alexandre Terrier, Alain Farron, Francesco Merlini

Wear of polyethylene is associated with aseptic loosening of orthopaedic implants and has been observed in hip and knee prostheses and anatomical implants for the shoulder. The reversed shoulder prostheses have not been assessed as yet. We investigated the ...

2009