Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Helium–neon laser

Related publications (30)

Single-Mode Laser in the Telecom Range by Deterministic Amplification of the Topological Interface Mode

Kirsten Emilie Moselund

Photonic integrated circuits are paving the way for novel on-chip functionalities with diverse applications in communication, computing, and beyond. The integration of on-chip light sources, especially single-mode lasers, is crucial for advancing those pho ...

Amer Chemical Soc2024

Persistent enhancement of exciton diffusivity in CsPbBr3 nanocrystal solids

Seryio Saris

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occup ...

Amer Assoc Advancement Science2024

Influence of ionization and cumulative effects on laser-induced crystallization in multilayer dielectrics

Yves Bellouard, Victor Carle Adrien Boureau, Ruben Ricca

Crystallization of amorphous layers has been demonstrated under various radically different laser-exposure conditions, including continuous wave (cw) and pulsed lasers. Here, we investigate the specific role of ionization in the crystallization of dielectr ...

2024

Femtosecond-laser direct-write photoconductive patterns on tellurite glass

Yves Bellouard, Gözden Torun

We report the formation of arbitrary photoconductive patterns made of tellurium (Te) nanocrystals by exposing a tellurite (TeO2-based) glass to femtosecond laser pulses. During this process, Te/TeO2-glass nanocomposite interfaces with photoconductive prope ...

American Physical Society (APS)2024

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Two statistical regimes in the transition to filamentation

Debbie Eeltink

We experimentally investigate fluctuations in the spectrum of ultrashort laser pulses propagating in air, close to the critical power for filamentation. Increasing the laser peak power broadens the spectrum while the beam approaches the filamentation regim ...

Optica Publishing Group2023

Mode-Specific Coupling of Nanoparticle-on-Mirror Cavities with Cylindrical Vector Beams

Christophe Marcel Georges Galland, Sachin Suresh Verlekar, Valeria Vento, Philippe Andreas Rölli

Nanocavities formed by ultrathin metallic gaps permitthe reproducibleengineering and enhancement of light-matter interaction, withmode volumes reaching the smallest values allowed by quantum mechanics.While the enhanced vacuum field in metallic nanogaps ha ...

2023

Laser-guided lightning using kHz filamentation at 1030 nm

Farhad Rachidi-Haeri, Marcos Rubinstein, Antonio Sunjerga, Amirhossein Mostajabi

Controlling lightning is a long-time dream of mankind. Along with the rapid evolution of laser technologies, the idea to develop lightning protection based on filamentation of high-power ultrashort-pulse lasers emerged in the 1990s [1]. The goal of the Las ...

2023

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Assim Boukhayma, Olivier Bernard, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

The competing effects of wave amplitude and collisions on multi-ion species suppression of stimulated Brillouin scattering in inertial confinement fusion Hohlraums

Stephan Brunner

Reduction in stimulated Brillouin scattering (SBS) from National Ignition Facility Hohlraums has been predicted through the use of multi-ion species materials on Hohlraum walls. This approach to controlling SBS is based upon introducing a lighter ion speci ...

2023

High-useful yield and new autoionizing state of resonantly ionized tungsten

Reto Georg Trappitsch

In order to measure tungsten isotopic composition in presolar stardust grains that contain a limited number of atoms, we developed a new three-photon three-color resonance ionization scheme using titanium:sapphire lasers and the Laser Ionization of Neutral ...

ROYAL SOC CHEMISTRY2022

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

Roland Logé, Christian Leinenbach

Laser-powder bed fusion (L-PBF) has gained significant research interest, not only for its profound advantage of producing near-net shape complex geometries of metallic parts, but also for the possibility of producing tailored microstructures. Here we expl ...

ELSEVIER SCI LTD2022

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Annapaola Parrilli

In the past few years, laser powder-bed fusion (LPBF) of bulk metallic glasses (BMGs) has gained significant interest because of the high heating and cooling rates inherent to the process, providing the means to bypass the crystallization threshold. In thi ...

MDPI2021

Megapixel per second hardware efficient LiDAR based on microcombs

Tobias Kippenberg, Junqiu Liu, Maxim Karpov, Johann Emmeram Riemensberger, Anton Lukashchuk

We show a novel architecture for massively parallel FMCW LiDAR based on multiheterodyne mixing of two triangular chirped soliton microcombs generated in integrated Si3N4 microresonators using a single laser source and a single coherent receiver. We demonst ...

IEEE2021

Liouvillian spectral collapse in the Scully-Lamb laser model

Fabrizio Minganti

Phase transitions of thermal systems and the laser threshold were first connected more than forty years ago. Despite the nonequilibrium nature of the laser, the Landau theory of thermal phase transitions, applied directly to the Scully-Lamb laser model (SL ...

AMER PHYSICAL SOC2021

Fatigue Performance of an Additively Manufactured Zr-Based Bulk Metallic Glass and the Effect of Post-Processing

Roland Logé, Jamasp Jhabvala, Navid Sohrabi, Milad Hamidi Nasab, Annapaola Parrilli, Baptiste Thomas Jean Rouxel

Fatigue is the most common cause of failure of mechanical parts in engineering applications. In the current work, we investigate the fatigue life of a bulk metallic (BMG) glass fabricated via additive manufacturing. Specimens fabricated via laser powder-be ...

MDPI2021

Structural Order of the Molecular Adlayer Impacts the Stability of Nanoparticle-on-Mirror Plasmonic Cavities

Christophe Marcel Georges Galland, Magalí Alejandra Lingenfelder, Sachin Suresh Verlekar, Karla Banjac, Aqeel Ahmed, Fernando Pablo Cometto

Immense field enhancement and nanoscale confinement of light are possible within nanoparticle-on-mirror (NPoM) plasmonic resonators, which enable novel optically activated physical and chemical phenomena and render these nanocavities greatly sensitive to m ...

AMER CHEMICAL SOC2021

Additive manufacturing of a precious bulk metallic glass

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Güven Kurtuldu, Annapaola Parrilli

For the first time, a high-density amorphous and crack-free bulk metallic glass (BMG) based on a precious metal (PdCuNiP) was produced via additive manufacturing (AM). Laser powder-bed fusion (LPBF) was used for the fabrication of the samples, and led to a ...

2021