Concept

Clipping (audio)

Clipping is a form of waveform distortion that occurs when an amplifier is overdriven and attempts to deliver an output voltage or current beyond its maximum capability. Driving an amplifier into clipping may cause it to output power in excess of its power rating. In the frequency domain, clipping produces strong harmonics in the high-frequency range (as the clipped waveform comes closer to a squarewave). The extra high-frequency weighting of the signal could make tweeter damage more likely than if the signal was not clipped. In most cases, the distortion associated with clipping is unwanted, and is visible on an oscilloscope even if it is inaudible. However, clipping is often used in music for artistic effect, especially in heavier genres. When an amplifier is pushed to create a signal with more power than its power supply can produce, it will amplify the signal only up to its maximum capacity, at which point the signal can be amplified no further. As the signal simply "cuts" or "clips" at the maximum capacity of the amplifier, the signal is said to be "clipping". The extra signal which is beyond the capability of the amplifier is simply cut off, resulting in a sine wave becoming a distorted square-wave-type waveform. Amplifiers have voltage, current and thermal limits. Clipping may occur due to limitations in the power supply or the output stage. Some amplifiers are able to deliver peak power without clipping for short durations before energy stored in the power supply is depleted or the amplifier begins to overheat. Many electric guitar players intentionally overdrive their amplifiers (or insert a "fuzz box") to cause clipping in order to get a desired sound (see guitar distortion). Some audiophiles believe that the clipping behavior of vacuum tubes with little or no negative feedback is superior to that of transistors, in that vacuum tubes clip more gradually than transistors (i.e. soft clipping, and mostly even harmonics), resulting in harmonic distortion that is generally less objectionable.

Official source

https://en.wikipedia.org/wiki/Clipping_(audio)

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related lectures (3)

CS Stage: Load and Linearization

Explores load impedance, current sources, linearity, and gain optimization in CS stages.

CS Stage: Load and Gain Optimization

Explores load and gain optimization in CS stages for amplifier circuits.

Basic Two-stage OPAMP: Small-signal Analysis

Covers the design and analysis of basic two-stage operational amplifiers (OPAMPs) with a focus on small-signal analysis and offset reduction techniques.

Related publications (12)

Vision-Based Automated Severity Rating of REM Sleep Behavior Disorder: From Heuristic Features to Foundation Models

Alexandre Massoud Alahi

Automated severity rating of rapid eye movement (REM) sleep behavior disorder (RBD) movements would enable multi-night monitoring to detect potentially injurious behaviors and provide objective endpoints for clinical trials. We compared a heuristic classifier using optical flow-derived features against V-JEPA2, a self-supervised video foundation model, for clip-level severity classification (3329 mild versus 284 moderate-to-severe) of in-laboratory video-polysomnography infrared recordings in 86 isolated RB

openRxiv2026

Wideband and Frequency‐Reconfigurable Loop Antenna for Sub‐6 GHz Applications

This paper presents a horizontally polarised, low‐profile loop antenna that operates in two distinct modes: a wideband (WB) and a frequency‐reconfigurable (FR) mode. The antenna is based on a circular segmented loop integrated with varactor diodes and a compact printed microstrip balun, whereas the frequency control is realised through the adjustment of the balun line width. In the WB mode, the antenna exhibits an exceptionally large impedance bandwidth, ranging from 2.9 to 3.9 GHz ( dB), with a maximum rea

Institution of Engineering and Technology (IET)2026

Experimental Validation of a PMU Prototype Resilient Against DC Offsets and with Attenuated Self-Interference

This paper presents the development of a PMU prototype based on a synchrophasor estimation (SE) technique previously developed by the authors, i.e. the DCSOGI-IpDFT. This SE algorithm is characterized by the rejection of static DC offsets and an inherent attenuation of the self-interference of the fundamental tone. The resulting device, deployed in an industrygrade platform, shows compliance with the most demanding requirements for both P an M PMU performance classes at once. This compliance is assessed usi

IEEE2025

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Clipping_(audio)

About this result

Related lectures (3)

CS Stage: Load and Linearization

Explores load impedance, current sources, linearity, and gain optimization in CS stages.

CS Stage: Load and Gain Optimization

Explores load and gain optimization in CS stages for amplifier circuits.

Basic Two-stage OPAMP: Small-signal Analysis

Covers the design and analysis of basic two-stage operational amplifiers (OPAMPs) with a focus on small-signal analysis and offset reduction techniques.

Related publications (12)

Vision-Based Automated Severity Rating of REM Sleep Behavior Disorder: From Heuristic Features to Foundation Models

Alexandre Massoud Alahi

openRxiv2026

Wideband and Frequency‐Reconfigurable Loop Antenna for Sub‐6 GHz Applications

Institution of Engineering and Technology (IET)2026

Experimental Validation of a PMU Prototype Resilient Against DC Offsets and with Attenuated Self-Interference

IEEE2025

Related people (2)

Petr Motlicek

Teaching & PhD PhD Students Shashi Kumar Past EPFL PhD Students as codirector Subhadeep Dey, Weipeng He, Juan Pablo Zuluaga Gomez Courses Digital Speech and Audio Coding EE-719 The goal of this course is to introduce the engineering students state-of-the-art speech and audio coding techniques with an emphasis on the integration of knowledge about sound production and auditory perception through signal processing techniques.

Pierre Vandergheynst

Pierre Vandergheynst received the M.S. degree in physics and the Ph.D. degree in mathematical physics from the Université catholique de Louvain, Louvain-la-Neuve, Belgium, in 1995 and 1998, respectively. From 1998 to 2001, he was a Postdoctoral Researcher with the Signal Processing Laboratory, Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland. He was Assistant Professor at EPFL (2002-2007), where he is now a Full Professor of Electrical Engineering and, by courtesy, of Computer and Communication Sciences. As of 2015, Prof. Vandergheynst serves as EPFL’s Vice-Provost for Education. His research focuses on harmonic analysis, sparse approximations and mathematical data processing in general with applications covering signal, image and high dimensional data processing, computer vision, machine learning, data science and graph-based data processing. He was co-Editor-in-Chief of Signal Processing (2002-2006), Associate Editor of the IEEE Transactions on Signal Processing (2007-2011), the flagship journal of the signal processing community and currently serves as Associate Editor of Computer Vision and Image Understanding and SIAM Imaging Sciences. He has been on the Technical Committee of various conferences, serves on the steering committee of the SPARS workshop and was co-General Chairman of the EUSIPCO 2008 conference. Pierre Vandergheynst is the author or co-author of more than 70 journal papers, one monograph and several book chapters. He has received two IEEE best paper awards. Professor Vandergheynst is a laureate of the Apple 2007 ARTS award and of the 2009-2010 De Boelpaepe prize of the Royal Academy of Sciences of Belgium.

Related concepts (8)

Tube sound

Tube sound (or valve sound) is the characteristic sound associated with a vacuum tube amplifier (valve amplifier in British English), a vacuum tube-based audio amplifier. At first, the concept of tube sound did not exist, because practically all electronic amplification of audio signals was done with vacuum tubes and other comparable methods were not known or used. After introduction of solid state amplifiers, tube sound appeared as the logical complement of transistor sound, which had some negative connotations due to crossover distortion in early transistor amplifiers.

Distortion (music)

Distortion and overdrive are forms of audio signal processing used to alter the sound of amplified electric musical instruments, usually by increasing their gain, producing a "fuzzy", "growling", or "gritty" tone. Distortion is most commonly used with the electric guitar, but may also be used with other electric instruments such as electric bass, electric piano, synthesizer and Hammond organ. Guitarists playing electric blues originally obtained an overdriven sound by turning up their vacuum tube-powered guitar amplifiers to high volumes, which caused the signal to distort.

Audio system measurements

Audio system measurements are a means of quantifying system performance. These measurements are made for several purposes. Designers take measurements so that they can specify the performance of a piece of equipment. Maintenance engineers make them to ensure equipment is still working to specification, or to ensure that the cumulative defects of an audio path are within limits considered acceptable. Audio system measurements often accommodate psychoacoustic principles to measure the system in a way that relates to human hearing.

Related notebooks (4)

Investigating the Effect of Phase on Sound Perception

Hearing the phase of a sound[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In this notebook we will investigate the effect of phase on the perceptual quality of a sound. It is often said that the human ear is commercial-grade audio equipment takes place in the magnitude domain only. In [1]: %matplotlib inline import matplotlib import matplotlib.pyplot as plt import numpy as np import IPython from scipy.io import wavfile In [2]: plt.rcParams["figure.fig

Filtering Music: Extracting Audio Frequencies Using Filters

Filtering Music[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In this notebook we will design and use filters to extract specific audio frequencies from a music file. In [1]: %matplotlib inline import matplotlib.pyplot as plt import numpy as np import IPython import scipy.signal as sp from scipy.io import wavfile infringment...) In [2]: IPython.display.Audio(s, rate=SF) Out[2]: Your browser does not support the audio element.

Extracting the bas

Voice Transformation Techniques Using Digital Signal Processing

A Gallery of Voice Transformers[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In this notebook we will explore various ways to implement a system that changes the voice of a speaker. Typical applications for these techniques, strictly sorted by plausibility, include international spy missions and prank telephone calls, and devices such as the one displayed here can be easily bought on the web... or in a novelty shop. No description has been provided for t

Exploring Quantization and Oversampling through One-Bit Music

One-Bit Music[1]¶ In this notebook we will talk about quantization and oversampling and we will do so by taking a trip down memory lane to revisit the early from monophonic square waves, introduce polyphony by way of pulse-width modulation and finish with the basics of sigma-delta quantization. pacman In [1]: import matplotlib import matplotlib.pyplot as plt import numpy as np import scipy.signal as sp from scipy.io import wavfile import IPython In [2]: import sys ! wget -q -O mus