Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Instrument amplifier

Related publications (23)

Three-wave-mixing quantum-limited kinetic inductance parametric amplifier operating at 6 T near 1 K

Pasquale Scarlino, Simone Frasca, Guillaume Beaulieu, Camille René Charles Roy

Parametric amplifiers play a crucial role in modern quantum technology by enabling the enhancement of weak signals with minimal added noise. Traditionally, Josephson junctions have been the primary choice for constructing parametric amplifiers. Nevertheles ...

American Physical Society (APS)2024

Amorphous Silicon Based Microchannel Plates for Time-of-Flight Positron Emission Tomography

Samira Alexandra Frey

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional lead glass microchannel plates. Their main advantages lie in their cheaper and more flexible fabrication processes, allowing for adaptabl ...

EPFL2023

Nanoplasma-based Millimiter-wave Modulators on a Single Metal Layer

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

Fundamental constraints imposing power-frequency trade-offs in conventional electronics have stimulated research on alternative technologies for millimeter-wave and sub-millimeter-wave applications. In this work, we use the picosecond threshold firing of n ...

Institute of Electrical and Electronics Engineers2022

Science on the Summit: Exploring Scientific Tourism Through the Lens of Eighteenth Century Mountain Ascents

Jérôme Baudry, Simon François Dumas Primbault, Ion-Gabriel Mihailescu

This contribution argues that a particular scientific context made summits a place of interest for eighteenth-century travelers. This development is connected to two particular scientific practices. First, the challenges raised by making the barometer into ...

IGA-ASSOC DIFFUSION RECHERCHE ALPINE2022

Measurements and analysis of different front-end configurations for monolithic SiGe BiCMOS pixel detectors for HEP applications

Edoardo Charbon

This paper presents a small-area monolithic pixel detector ASIC designed in 130 nm SiGe BiCMOS technology for the upgrade of the pre-shower detector of the FASER experiment at CERN. The purpose of this prototype is to study the integration of fast front-en ...

IOP Publishing Ltd2021

Beyond Tolerance Factor: Using Deep Learning for Prediction Formability of ABX3 Perovskite Structures

Mohammad Khaja Nazeeruddin, Tom Theodorus Antonius Lummen, Valentin Ianis Emmanuel Queloz, Alexander Fedorovskiy

Deep learning (DL) is a modern powerful instrument for multiple purposes, including classification. In this study, this technique is applied to the task of perovskites formability. A commonly known perovskite dataset is used to try to make an instrument su ...

2021

Combining active and passive acoustic methods to image hydraulic fracture growth in laboratory experiments

Brice Tanguy Alphonse Lecampion, Seyyedmaalek Momeni, Dong Liu

We combine active and passive acoustic measurements to improve the spatio- temporal imaging of hydraulic fracture growth performed under true triaxial confinement in the laboratory. 64 active piezo-electric transducers (54 P waves, 10 S waves) work in sour ...

IOP Publishing2021

Performance of chip-scale optical frequency comb generators in coherent WDM communications

Tobias Kippenberg

Optical frequency combs have the potential to become key building blocks of wavelength-division multiplexing (WDM) communication systems. The strictly equidistant narrow-band spectral lines of a frequency comb can serve either as carriers for parallel WDM ...

2020

On the effect of linear feedback and parametric pumping on a resonator's frequency stability

Luis Guillermo Villanueva Torrijo, Zohreh Mohammadi

Resonant sensors based on micro- and nano-electro mechanical systems (M/NEMS) are ubiquitous in many sensing applications due to their outstanding performance capabilities, which are directly proportional to the quality factor (Q) of the devices. We addres ...

2020

AlGaN/GaN Nanowires: from Electron Transport to RF Applications

Giovanni Santoruvo

Gallium Nitride (GaN) and all III-Nitride compounds have revolutionized the world with the development of the blue light emitting diode (LED). In addition, GaN-based epi-structures, such as AlGaN/GaN, enable the fabrication of high electron mobility transi ...

EPFL2020

Nanometric axial resolution of fibronectin assembly units achieved with an efficient reconstruction approach for multi-angle-TIRF microscopy

Emmanuel Emilien Louis Soubies, Sébastien Schaub

High resolution imaging of molecules at the cell-substrate interface is required for understanding key biological processes. Here we propose a complete pipeline for multi-angle total internal reflection fluorescence microscopy (MA-TIRF) going from instrume ...

Nature Research2019

Duct modes damping through an adjustable electroacoustic liner under grazing incidence

Hervé Lissek, Romain Boulandet

This paper deals with active sound attenuation in lined ducts with flow and its application to duct modes damping in aircraft engine nacelles. It presents an active lining concept based on an arrangement of electroacoustic absorbers flush mounted in the du ...

2018

A 10b SAR ADC with Widely Scalable Sampling Rate and AGC Amplifier Front-End

Yusuf Leblebici, Seyed Armin Tajalli, Firat Çelik, Ayça Akkaya

This paper presents a low power successive approximation register (SAR) ADC and its front-end automatic gain control (AGC) amplifier designed in 65nm CMOS technology. Digitally controlled variable gain amplifier (VGA) in AGC loop is used to maximize the dy ...

IEEE2018

Ultralow-power chip-based soliton microcombs for photonic integration

Tobias Kippenberg, Junqiu Liu, Maxim Karpov, Martin Hubert Peter Pfeiffer, Hairun Guo, Arslan Sajid Raja, Michail Zervas, Nils Johan Engelsen, Bahareh Ghadiani

The generation of dissipative Kerr solitons in optical microresonators has provided a route to compact frequency combs of high repetition rate, which have already been employed for optical frequency synthesizers, ultrafast ranging, coherent telecommunicati ...

OPTICAL SOC AMER2018

Versatile short-wave and mid-infrared sources based on wideband parametric conversion

Adrien Billat

The mid-infrared part of the optical spectrum is of high interest in a wide range of applications such as environmental gas monitoring, contaminant detection in the chemical, food or pharmaceutical industry, medical diagnosis, or defense and security. Rele ...

EPFL2017

The thermal triple-axis-spectrometer EIGER at the continuous spallation source SINQ

Henrik Moodysson Rønnow

EIGER is the new thermal triple-axis-spectrometer at the continuous spallation SINQ at PSI. The shielding of the monochromator consists only of non- or low magnetizable materials, which allows the use of strong magnetic fields with the instrument. This shi ...

Elsevier2017

Modeling and Analysis for Thermal Management in Gallium Nitride HEMTs Using Microfluidic Cooling

Gunjan Agarwal

In this paper, thermal management in GaN (gallium nitride) based microelectronic devices is addressed using microfluidic cooling. Numerical modeling is done using finite element analysis (FEA), and the results for temperature distribution are presented for ...

American Society of Mechanical Engineers2017

Digital Predistortion of Power Amplifier Non-Linearities for Full-Duplex Transceivers

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Andrew Charles Mallory Austin

Non-linearities introduced by the power amplifier stage can significantly reduce the performance of self-interference cancellation in full-duplex transceivers. Accordingly, we propose a full-duplex system architecture that predistorts the digital baseband ...

Ieee2016

A remotely powered fully integrated low power class-E power amplifier for implantable sensor systems

Catherine Dehollain, Enver Gürhan Kilinç, Kerim Türe

This paper presents a fully integrated low power class-E power amplifier and its integration to remotely powered sensor system. The on-chip 1.2 GHz power amplifier is implemented in 0.18 A mu m CMOS process with 0.2 V supply. The implantable system is powe ...

Springer2016

A Low Power On-Chip Class-E Power Amplifier For Remotely Powered Implantable Sensor Systems

Catherine Dehollain, Enver Gürhan Kilinç, Kerim Türe

This paper presents a low power fully integrated class-E power amplifier and its integration with remotely powered sensor system. The class-E power amplifier is suitable solution for low-power applications due to its high power efficiency. However, the req ...

Spie-Int Soc Optical Engineering2015