Concept

Mass fraction (chemistry)

In chemistry, the mass fraction of a substance within a mixture is the ratio (alternatively denoted ) of the mass of that substance to the total mass of the mixture. Expressed as a formula, the mass fraction is: Because the individual masses of the ingredients of a mixture sum to , their mass fractions sum to unity: Mass fraction can also be expressed, with a denominator of 100, as percentage by mass (in commercial contexts often called percentage by weight, abbreviated wt%; see mass versus weight). It is one way of expressing the composition of a mixture in a dimensionless size; mole fraction (percentage by moles, mol%) and volume fraction (percentage by volume, vol%) are others. When the prevalences of interest are those of individual chemical elements, rather than of compounds or other substances, the term mass fraction can also refer to the ratio of the mass of an element to the total mass of a sample. In these contexts an alternative term is mass percent composition. The mass fraction of an element in a compound can be calculated from the compound's empirical formula or its chemical formula. Percent concentration does not refer to this quantity. This improper name persists, especially in elementary textbooks. In biology, the unit "%" is sometimes (incorrectly) used to denote mass concentration, also called mass/volume percentage. A solution with 1 g of solute dissolved in a final volume of 100 mL of solution would be labeled as "1%" or "1% m/v" (mass/volume). This is incorrect because the unit "%" can only be used for dimensionless quantities. Instead, the concentration should simply be given in units of g/mL. Percent solution or percentage solution are thus terms best reserved for mass percent solutions (m/m, m%, or mass solute/mass total solution after mixing), or volume percent solutions (v/v, v%, or volume solute per volume of total solution after mixing). The very ambiguous terms percent solution and percentage solutions with no other qualifiers continue to occasionally be encountered.

Official source

https://en.wikipedia.org/wiki/Mass_fraction_(chemistry)

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (29)

MSE-422: Advanced metallurgy

This course covers the metallurgy, processing and properties of modern high-performance metals and alloys (e.g. advanced steels, Ni-base, Ti-base, High Entropy Alloys etc.). In addition, the principles of computational alloy design as well as approaches fo ...

ChE-201: Introduction to chemical engineering

Introduction to Chemical Engineering is an introductory course that provides a basic overview of the chemical engineering field. It addresses the formulation and solution of material and energy balances by using the physical/chemical properties of material ...

ChE-310: Fundamentals of separation processes

The course will cover fundamentals concepts of separation processes involving chemical equilibrium and mass transfer. Students will design separation processes widely used in the industry, for the separation of liquid mixtures, gas-liquid mixtures, and gas ...

Related lectures (32)

Elementary Analysis: Chemical Quantities

Introduces the determination of chemical quantities in compounds through mass fractions and molar masses.

Chemical Reactions: Stoichiometry

Explores stoichiometry in chemical reactions, including balancing reactions and determining limiting reagents.

Diffusion Coefficient

Explores the determination of diffusion coefficient in different states of matter and the factors influencing the diffusion process.

Related units (6)

IIE - Administration

Laboratory of atmospheric processes and their impacts

IMX - Administration

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Mass_fraction_(chemistry)

About this result

Related courses (29)

MSE-422: Advanced metallurgy

ChE-201: Introduction to chemical engineering

ChE-310: Fundamentals of separation processes

Related lectures (32)

Elementary Analysis: Chemical Quantities

Introduces the determination of chemical quantities in compounds through mass fractions and molar masses.

Chemical Reactions: Stoichiometry

Explores stoichiometry in chemical reactions, including balancing reactions and determining limiting reagents.

Diffusion Coefficient

Explores the determination of diffusion coefficient in different states of matter and the factors influencing the diffusion process.

Related publications (8)

Determining Olefinic and Phenolic Fractions in Dissolved Organic Matter by Ozonation with Stable Oxygen Isotope Analysis of H 2 O 2

Reactivity-related characterization of dissolved organic matter (DOM) is crucial for mitigating undesirable byproduct formation during ozonation. However, the characterization of DOM remains challenging due to its molecular complexity, especially in distinguishing olefin- and phenol-type moieties, primary O3 reactive sites responsible for generating carbonyl-containing byproducts. Here, we present a novel approach based on stable oxygen isotope analysis of H2O2, a common byp

American Chemical Society (ACS)2026

Source-driven variability of particulate matter oxidative potential at urban and rural coastal sites in the northwestern Mediterranean

Health effects associated with particulate matter (PM) exposure are closely linked to the ability of particles to induce the formation of reactive oxygen species (ROS) and trigger oxidative stress. Accordingly, the oxidative potential (OP) of PM is considered a more health-relevant toxicity metric than mass concentration alone. However, in densely populated and ecologically sensitive areas in the northwestern Mediterranean, the main sources contributing to OP remain poorly constrained, particularly regardin

2026

Understanding the Late Age Strength of Low CO2 Binders Incorporating Calcium Aluminates-Based Accelerators

In a previous study, it was shown that the incorporation of calcium aluminates-based accelerators is an effective solution to improve the early age strength of LC3. The higher early age strength was linked to the ettringite formation during the first hours of hydration [1]. Late age strength results (up to 1 year) of LC3 incorporating calcium aluminates-based accelerators were higher than PC and LC3. This study focuses on understanding the late age strength of LC3 boosted with calcium aluminates-based accel

Springer2026

Related people (28)

Lucie Navratilova

Expertise Scanning electron microscopy SEM Dual beam microscope SEM/FIB EDX analysis Teaching & PhD Courses 3D Electron Microscopy and FIB-Nanotomography MSE-704 The principles of 3D surface (SEM) reconstruction and its limitations will be explained. 3D volume reconstruction and tomography methods by electron microscopy (SEM/FIB and TEM) will be explained and compared with x-ray tomography. Scanning electron microscopy techniques (a) MSE-636(a) This intensive course is inten

Jan Van Herle

Born in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016. 1987 : Chemist from Basel University (CH). 1988 : Post-graduate IT diploma from Basel Engineering School. 1989 : Industry internship ABB Baden (CH). 1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms. 1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders. 1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes). 1998-2000 : Masters in Energy Technology, EPFL. 2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised. 2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008. Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry). Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals. Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).

Livia Eleonora Bove Kado

Expertise high pressure research on simple molecular liquidsstructural and dynamical properties of ice and ice clathrates under extreme conditions structural and dynamical propertie of water and aqueous solutionspolyamorphism and glass transitionliquid metals dynamics Expertise high pressure research on simple molecular liquidsstructural and dynamical properties of ice and ice clathrates under extreme conditions structural and dynamical propertie of water and aqueous solutionspolyamorphism and glass transit

Nicolas Grandjean

Nicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.

Benjamin Jérémy Laurent Heutte

Awards Poster Prize Award Royal Society of Chemistry 2025 Best Poster Award - 2nd Prize Doctoral School of Civil and Environmental Engineering 2024

Julia Schmale

Expertise atmospheric science, aerosol-cloud interactions, climate change in polar regions Mission Extreme environments are particularly sensitive to climate change and are transforming at accelerated rates. This can have important global repercussions. EERL aims to create integrated process understanding by investigating interactions between the atmosphere, cryosphere, biosphere, ocean, land and anthroposphere. The goal is to characterize climate-change relevant and vertically-resolved processes that are d

Arnaud Magrez

Education PhD., Materials Science, summa cum laude, Université de Nantes, 2002 M.S., Chemistry, Université des Sciences et Technologies de Lille, 1999 Academic positions Head of the Crystal Growth Facility, EPFL, 2012-present Research Associate, Laboratoire de Physique de la Matière Complexe, EPFL, 2003-2012 Research Fellow, Peter Grunberg Institute, FZ-Juelich, 2002-2003 Administrative positions at EPFL Scientific staff member, EPFL Assembly, 2015-present Scientific staff member, School Council SB, 2014-present Member of the IPHYS office 2016-present Member of the ICMP office 2012-2015 Member of the safety committee of ICMP 2010-2015

Jean-Paul Richard Kneib

Expertise Cosmology, Gravitational Lensing, Redshift Survey, First Galaxies, Cluster of Galaxies, Fiber-positioner robotic system, Radio Astronomy, Space Sustainibility Current work

Former Principal investigator of the SDSS-IV eBOSS project. This is an international project assembling more than 150 participants located mainly in Europe, USA and China. This project will observe 1.5 million galaxy and quasars over 2014-2020 to accurately measure the expansion history of the Universe. * Member of the DESI co

Marco Picasso

Expertise Computational Science and Engineering Mission I am teaching analysis and numerical analysis for engineers and mathematicians at bachelor and master levels.My research pertains to the numerical simulation of complex physical systems with partial differential equations.Here is some bibliometry: Google Scholar, Research Gate, Orcid, here is my most recent CV. Ongoing research projects: - Numerical simulation of aluminium electrolysis, collaboration with RioTinto LRF lab, Ycoorsystems SA and Jacques

Jacques Rappaz

Originaire de Neyruz-sur-Moudon (VD), Jacques Rappaz est né le 22 mars 1947. Après ses études primaires et secondaires à Lausanne, il étudie la physique, de 1964 à 1970, à l'Ecole Polytechnique de l'Université de Lausanne (EPUL et EPFL dès 1969) où il obtient son diplôme en janvier 1971. Il entreprend ensuite un travail de recherche en analyse numérique à l'EPFL. En avril 1976, il soutient une thèse consacrée à l'approximation spectrale d'opérateurs provenant de la physique des plasmas.De 1977 à 1980, il es

Related units (6)

IIE - Administration

Laboratory of atmospheric processes and their impacts

IMX - Administration

Related concepts (5)

Molar concentration

Molar concentration (also called molarity, amount concentration or substance concentration) is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution. In chemistry, the most commonly used unit for molarity is the number of moles per liter, having the unit symbol mol/L or mol/dm3 in SI unit. A solution with a concentration of 1 mol/L is said to be 1 molar, commonly designated as 1 M.

Mole fraction

In chemistry, the mole fraction or molar fraction (xi or χi) is defined as unit of the amount of a constituent (expressed in moles), ni, divided by the total amount of all constituents in a mixture (also expressed in moles), ntot. This expression is given below: The sum of all the mole fractions is equal to 1: The same concept expressed with a denominator of 100 is the mole percent, molar percentage or molar proportion (mol%). The mole fraction is also called the amount fraction.

Parts-per notation

In science and engineering, the parts-per notation is a set of pseudo-units to describe small values of miscellaneous dimensionless quantities, e.g. mole fraction or mass fraction. Since these fractions are quantity-per-quantity measures, they are pure numbers with no associated units of measurement. Commonly used are parts-per-million (ppm, 10−6), parts-per-billion (ppb, 10−9), parts-per-trillion (ppt, 10−12) and parts-per-quadrillion (ppq, 10−15). This notation is not part of the International System of Units (SI) system and its meaning is ambiguous.

Related exercises (10)

Mickey moment of inertia

xa0 The head of Mickey is composed of three disks of constant density ρ and width e. The radius of the figure is R and the radius of his ears is

\frac{R}{2}

. We note (Oz) the axis going through he middle of the figure of Mickey ( see sketch hereby). Calculate the moment of inertia of the head of Mickey around the (Oz), as function of R and of its mass M. Reminder : Moment of inertia of a homogeneous disk of radius R and of mass M around its axis of revolution :

I_z = \frac{1}{2}MR^2

xa0 The moment of

Perforated plate

We consider a square plate with side of length a and uniform density. We pierce a circular hole of radius R in the plate such that the distances between the hole’s edge and two adjacent edges of the plate are b and c, with b,u2006cu2004

Collision of particles

A particle of mass m₁, of initial speed v₁u2004=u2004v₁u2006e_(x) collides with a particle of mass m₂, initially at rest, i.e. v₂u2004=u20040. We consider here the case of an elastic collision between the two particles. We denote v′₁u2004=u2004v′₁(cosθ₁u2006e_(x)+sinθ₁u2006e_(y)) and v′₂u2004=u2004v′₂(cosθ₂u2006e_(x)−u2006sinθ₂u2006e_(y)) the speeds after the collision.

Using the conservation laws, write the equations relating the physical variables v₁, m₁, m₂ with the physical variables v′₁, v′₂,