Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Integral fast reactor

Related publications (31)

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Integrated modelling of neon impact on JET H-mode core plasmas

Yann Camenen, Michele Marin

Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...

IOP Publishing Ltd2023

Extension, validation, and optimization of Serpent/DYN3D/ATHLET code system for SFR applications

Vincenzo Anthony Di Nora

The sequence of codes Serpent/DYN3D has been developed by the Helmholtz-Zentrum Dresden-Rossendorf and successfully applied to core static and transient analyses of sodium-cooled fast reactors (SFRs). The successful application of the sequence to SFRs was ...

EPFL2023

Recent progress in calcium looping integrated with chemical looping combustion (CaL-CLC) using bifunctional CaO/CuO composites for CO2 capture: A state-of-the-art review

Oliver Kröcher, Muhammad Awais Naeem

Calcium looping integrated with chemical looping combustion (CaL-CLC) process is an efficient and cost-effective CO2 capture technology. In this technique, the heat generated by chemical looping combustion of CuO is used insitu to calcine CaCO3, thus avoid ...

ELSEVIER SCI LTD2023

A holistic investigation of photocatalytic hydrogen generation

Sangram Ashok Savant

Photocatalytic (PC) solar hydrogen production is a promising way to provide green hydrogen using only sunlight and abundant reactants such as water. PC approaches use catalytically active semiconductor particles suspended in liquid electrolytes. The partic ...

EPFL2023

On the development of multi-physics tools for nuclear reactor analysis based on OpenFOAM (R): state of the art, lessons learned and perspectives

Carlo Fiorina

In the last two decades, the use of OpenFOAM as a multi-physics library for nuclear applications has grown from a sporadic use for exploratory studies to a widespread application for the analysis of innovative reactor concepts and highly complex problems. ...

ELSEVIER SCIENCE SA2022

Unmoderated molten salt reactors design optimisation for power stability

Andreas Pautz, Axel Guy Marie Laureau

The critical region of unmoderated molten salt reactors consists in a cavity filled with a liquid fuel. The lack of internal structure implies a complex flow structure of the circulating fuel salt. A preliminary core shape optimization has been performed d ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Interface Tracking Investigation of the Sliding Bubbles Effects on Heat Transfer in the Laminar Regime

Konstantin Mikityuk, Lubomír Bures

Helium gases are utilized to remove fission products from the molten salt fast reactor (MSFR) core during operation. Helium gases and other volatile fission products may be introduced into the intermediate heat exchanger channels. The effect of these gases ...

2022

Advanced methodologies for modeling and assessment of SFR safety functions

Janos Bodi

The present doctoral work was performed to contribute to the conceptual design development and safety assessment of a Generation IV Sodium Fast Reactor (SFR) in the frame of the European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ES ...

EPFL2022

A Coarse-mesh Methodology for the Analysis of One and Two-phase Nuclear Reactor Thermal-hydraulics in a Multi-physics Context

Stefan Radman

The analysis of nuclear reactors for performance and safety assessment benefits from the use of computational tools. In this context, this work aims at the development and application of a thermal-hydraulics methodology and related software that respond to ...

EPFL2021

Optimization of multi-group energy structures for diffusion analyses of sodium-cooled fast reactors assisted by simulated annealing - Part I: Methodology demonstration

Konstantin Mikityuk, Vincenzo Anthony Di Nora

This study presents an approach to the selection of optimal energy group structures for multi-group nodal diffusion analyses of Sodium-cooled Fast Reactor cores. The goal is to speed up calculations, particularly in transient calculations, while maintainin ...

2021

Investigation on the effect of eccentricity for fuel disc irradiation tests

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro

A varying degree of eccentricity always exists in the initial configuration of a nuclear fuel rod. Its impact on traditional LWR fuel is limited as the radial gap closes relatively early during irradiation. However, the effect of misalignment is expected t ...

2021

X-point radiation, its control and an ELM suppressed radiating regime at the ASDEX Upgrade tokamak

Marco Wischmeier

Future fusion reactors require a safe, steady state divertor operation. The required detached operation is, in tokamaks with metal walls, usually achieved by seeding of impurities, such as nitrogen. With strong seeding levels, the dominant radiation is emi ...

IOP Publishing Ltd2021

A membrane-less electrolyzer with porous walls for high throughput and pure hydrogen production dagger

Demetri Psaltis, Seyyed Mohammad Hosseini Hashemi, Pooria Hadikhani, Steven Alexandre Schenk

Membrane-less electrolyzers utilize fluidic forces instead of solid barriers for the separation of electrolysis gas products. These electrolyzers have low ionic resistance, a simple design, and the ability to work with electrolytes at different pH values. ...

ROYAL SOC CHEMISTRY2021

Neutronics Analyses of EU DEMO 2020 EC Port Configuration

Minh Quang Tran, René Chavan

The DEMOnstration fusion power plant (DEMO) is being developed within EUROfusion and one of the challenges is the integration of all the systems into a fusion reactor by designs that meet strict design criteria required for safe and reliable long-term reac ...

NUCLEAR SOCIETY SLOVENIA2021

Improved methodology for analysis and design of Molten Salt Reactors

Rodrigo Gonzalez Gonzaga De Oliveira

Molten Salt Reactors is a class of advanced reactors that is typically characterised by the presence of a molten inorganic salt of a fissile material as fuel. At the moment, this class of reactors is considered one of the promising options in the long run ...

EPFL2021

Data-Driven Reduced-Order Modeling of Convective Heat Transfer in Porous Media

Carlo Fiorina

This work presents a data-driven Reduced-Order Model (ROM) for parametric convective heat transfer problems in porous media. The intrusive Proper Orthogonal Decomposition aided Reduced-Basis (POD-RB) technique is employed to reduce the porous medium formul ...

MDPI2021

Growth and viability of microorganisms in bentonite and their potential activity in deep geological repository environments

Niels Burzan

Radioactive waste is among the most dangerous anthropogenic waste and its safe disposal is a challenging multi-generational task. Many nations have sought for the peaceful application of nuclear fission for the reliable production of electric energy to pow ...

EPFL2021

A Hybrid Approach to Neutron Transport with Thermal-hydraulic Feedback for Reactor Transient Analysis

Alexander Aures

Understanding the time-dependent behaviour of a nuclear reactor following an intended or unintended change of the reactor conditions is of crucial importance to the safe operation of nuclear reactors. Safety evaluations of nuclear reactors involve the anal ...

EPFL2021

Hydrogen production on demand by redox-mediated electrocatalysis: A kinetic study

Hubert Girault, Danick Reynard, Sunny Isaïe Maye

Producing hydrogen from water using a redox mediator on solid electrocatalyst particles in a reactor offers several advantages over classical electrolysis in terms of safety, membrane degradation, purity and flexibility. Herein, vanadium-mediated hydrogen ...

ELSEVIER SCIENCE SA2021