Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Galvanization

Related publications (15)

Ionic Liquid Gating of SrTiO3 Lamellas Fabricated with a Focused Ion Beam

Philip Johannes Walter Moll, Amelia Emily-Kay Estry

In this work, we combine two previously incompatible techniques for defining electronic devices: shaping three-dimensional crystals by focused ion beam (FIB), and two-dimensional electrostatic accumulation of charge carriers. The principal challenge for th ...

AMER CHEMICAL SOC2022

Tribological properties of gold matrix composite coatings with carbon nanocapsules containing ionic liquid lubricants

Stefano Mischler, Anna Neus Igual Muñoz

Self-lubricating, gold matrix composite coatings were produced by electrochemical codeposition of carbon nanocapsules filled with ionic liquid (IL) from a colloidal galvanic bath on a nickel electrode. The tribological response of the composite coatings wa ...

ELSEVIER2020

Oxide versus Nonoxide Cathode Materials for Aqueous Zn Batteries: An Insight into the Charge Storage Mechanism and Consequences Thereof

Alfredo Pasquarello, Assil Bouzid

Aqueous Zn-ion batteries, which are being proposed as large-scale energy storage solutions because of their unparalleled safety and cost advantage, are composed of a positive host (cathode) material, a metallic zinc anode, and a mildly acidic aqueous elect ...

2019

Influence of Zinc Anisotropy on Solidification Microstructures: Experimental Results and Phase-Field Simulations

Alexandre Durussel

Due to a distortion of its hexagonal unit cell along the c-axis compared to hexagonal-close-packed metals (c/a = 1.856 instead of 1.633), zinc is characterised by a large anisotropy of its solid-liquid interfacial energy. While previous studies have focuse ...

EPFL2015

Three-dimensional polymeric microtiles for optically-tracked fluidic self-assembly

Jürgen Brugger, Alcherio Martinoli, Massimo Mastrangeli

Self-assembly (SA) is a bio-inspired key coordination mechanism for swarms of intelligent agents as well as a pervasive bottom-up methodology for the fabrication of heterogeneous micro- and nanosystems. Analytical studies of SA at small scales are therefor ...

2014

Adhesion of thermoplastic polyurethane elastomer to galvanized steel

Jan-Anders Edvin Maansson, Véronique Michaud, Basile Golaz

When a thermoplastic polyurethane elastomer (TPU) is co-molded with galvanized steel, the subsequent adhesion and its durability are very sensitive to the chemical bonds created at the interface. Silane coupling primers are known for enhancing adhesion bet ...

Elsevier2011

Scanning Tunneling Luminescence of Individual CdSe Nanowires

Klaus Kern, Marko Burghard, Zhe Wang

The local luminescence properties of individual CdSe nanowires composed of segments of zinc blende and wurtzite crystal structures are investigated by low-temperature scanning tunneling luminescence spectroscopy. Light emission from the wires is achieved b ...

2011

Adhesion of thermoplastic polyurethane elastomer onto galvanized steel

Jan-Anders Edvin Maansson, Véronique Michaud, Basile Golaz

When a thermoplastic polyurethane elastomer (TPU) is applied onto galvanized steel by a hot melt process, the subsequent adhesion and its durability are very sensitive to the chemical bonds created at the interface. The effects of several surface treatment ...

2010

Texture Formation in Hot-Dip Galvanized Coatings : Nucleation and Growth of Anisotropic Grains in a Confined Geometry

Continuous hot-dip galvanization is a process during which steel sheets are coated with a layer of Zn-Al alloy to protect them against corrosion. As the name indicates, this is achieved by dipping the preheated sheet into a bath of molten alloy. The sheet ...

EPFL2010

Modeling Nucleation and Growth of Zinc Grains in Hot-Dip Galvanized Coatings

Michel Rappaz

Hot-dip galvanized Zn-0.2wt%Al coatings on steel sheets exhibit a strong basal texture ({0001} parallel to the sheet plane). Part of this texture call be explained by the faster growth of < 10 (1) over bar0 > dendrites as compared with < 0001 >, granting b ...

Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009

Effect of HBP modified γ-APS on the coating toughness and practical adhesion between galvanised steel and polyethylene

Jan-Anders Edvin Maansson, Véronique Michaud, Xavier Bulliard, Gabrielle Pax

Epoxy-functionalised hyperbranched polymers (HBP) were combined with aminosilanes to form coatings and their effect on the practical adhesion between galvanised steel and polyethylene was investigated. It was shown that HBPs were initially soluble in silan ...

2007

Tailoring of the practical adhesion between polyethylene and galvanised steel

Jan-Anders Edvin Maansson, Véronique Michaud, Gabrielle Pax

The practical adhesion of maleic anhydride grafted polyethylene (MAH-PE) to galvanised steel was studied using 3-point flexure tests, before and after hydrothermal ageing. Before bonding, the electro-galvanised steel was treated with γ -aminopropyltriethox ...

2006

Fabrication of low-temperature co-fired ceramics micro-fluidic devices using sacrificial carbon layers

Thomas Maeder, Peter Ryser, Caroline Marguerite Jacq, Hansu Birol, Sigfried Strässler

Ease of fabrication and design flexibility are two attractive features of low temperature co-fired ceramics (LTCC) technology for fabrication of complex micro-fluidic devices. Such structures are designed and processed using different shaping methods, the ...

2005

Partial release and detachment of microfabricated metal and polymer structures by anodic metal dissolution

Philippe Renaud, Arnaud Bertsch, Stefan Metz

The large majority of microelectromechanical systems (MEMS) are fabricated on silicon, glass or Pyrex substrates by manufacturing techniques, which originated from the semiconductors industry. However, their final application often requires removal of the ...

Institute of Electrical and Electronics Engineers2005

Polyimide and SU-8 microfluidic devices manufactured by heat- depolymerizable sacrificial material technique

Philippe Renaud, Arnaud Bertsch, Sébastien Jiguet, Stefan Metz

The following paper describes a sacrificial layer method for the manufacturing of microfluidic devices in polyimide and SU-8. The technique uses heat-depolymerizable polycarbonates embedded in polyimide or SU-8 for the generation of microchannels and seale ...

2004