Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Unité

Laboratoire des matériaux photoniques et caractérisation

Laboratoire

Publications associées (26)

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Ivo Utke, Johann Michler, Xavier Maeder

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

Wiley2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Caroline Hain

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

EPFL2023

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Farzaneh Talebkeikhah

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Vapor Deposition of Perovskite Solar Cells

Quentin Jean-Marie Armand Guesnay

Thanks to the continuous improvement of crystalline silicon (c-Si) solar cells, largely dominating the market, photovoltaic electricity is nowadays the cheapest source of energy on the market. Yet, solar energy is far from being completely harvested, as t ...

EPFL2023

Limits between surface and inner clogging of riverbed by fine sediment

Giovanni De Cesare, Romain Maxime Dubuis, Romain Dubuis

The deposition of fine sediment on top of the riverbed affects the reproduction of spawning fishes and some species of benthos. The clogging of the substrate resulting from this deposition is a well-known issue in rivers affected by anthropogenic activity ...

2023

Methylamine Post-Deposition Treatments of Vapor-Deposited Perovskite Thin Films

Austin George Kuba

While the development of methylammonium lead iodide (MAPbI(3)) perovskite for photovoltaics has grown rapidly, the growth of high-quality material from vapor processes continues to be difficult due to challenges including crystallinity control. Methylamine ...

IEEE2023

Investigation in Crystal Growth/Morphology and Interface Engineering of Perovskite Solar Cells by Different Deposition Methods

Nadja Isabelle Desiree Klipfel

A new and promising technology has emerged to compete with traditional silicon photovoltaic semiconductors. The low material and processing costs and high-power conversion efficiencies of organic-inorganic metal halide perovskites make these a promising te ...

EPFL2022

Structural and photophysical investigation of single-source evaporation of CsFAPbI(3) and FAPbI(3) perovskite thin films

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Albertus Adrian Sutanto, Maria Cristina Momblona Rincón, Nadja Isabelle Desiree Klipfel

Thermal vacuum deposition is a stimulating technique for upscaling perovskite solar cells. However, the operational complexity of multisource vapor deposition (MSVD) and achieving stoichiometric perovskite layers may impede its implementation. The single-s ...

Royal Society of Chemistry2022

Molybdenum disulphide nanoporous membranes as nanofluidic platforms - large-area engineering and study

Michal Daniel Macha

The work demonstrated in this thesis represent the path towards developing the large-scale fabrication of two-dimensional nanoporous membrane devices and use thereof as platforms to study nanoscale physics of water and ion flow through confined channels. M ...

EPFL2022

Development of stencil lithography for stretchable interconnects

Yi-Chiang Sun

The growing needs for human healthcare have driven the development of wearable devices for monitoring the health status of an individual. Polymers represent a promising platform for such devices due to their ability to form an intimate contact between soft ...

EPFL2022

Nanobridge Stencil Enabling High Resolution Arbitrarily Shaped Metallic Thin Films on Various Substrates

Jürgen Brugger, Giovanni Boero, Yi-Chiang Sun

Stencil lithography (SL), which uses a perforated membrane as a reusable shadow mask to locally add material patterns on substrates provides a simple but versatile approach for the fabrication of functional devices on a large variety of substrate materials ...

Wiley2022

Colloidal transport and deposition through dense vegetation

David Andrew Barry, Li Chen

The effectiveness of submerged synthetic aquatic vegetation on removal of colloids from flowing water was investigated to explore retention of particulate nonpoint source pollutants in aquatic systems. In colloid transport experiments, the deposition rate ...

Elsevier2022

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, Caroline Hain

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

Vapor deposition of metal halide perovskite thin films: Process control strategies to shape layer properties

Christophe Ballif, Quentin Thomas Jeangros, Florent Sahli, Quentin Jean-Marie Armand Guesnay

Vapor-based processes are particularly promising to deposit the perovskite thin film absorber of solar cells. These deposition methods are up-scalable, involve a controlled solvent-free environment, have the ability to conformally coat rough substrates, in ...

2021

Vapor Transport Deposition of Methylammonium Iodide for Perovskite Solar Cells

Christophe Ballif, Quentin Thomas Jeangros, Florent Sahli, Björn Niesen, Cédric Bucher, Quentin Jean-Marie Armand Guesnay, Aymeric Michel Schafflützel, Nathanaël Miaz

Vapor-based processes are promising options to deposit metal halide perovskite solar cells in an industrial environment due to their ability to deposit uniform layers over large areas in a controlled environment without resorting to the use of (possibly to ...

2021

An Experimental Setup for Heterogeneous Catalysis on Atomically Defined Metal Nanostructures

Jean-Guillaume De Groot

The main objective of this PhD thesis is to link the atomic scale structure to the catalytic properties of self-assembled nanostructures. The growth and characterization of these nanostructures was carried out in an ultra-high vacuum (UHV) chamber initiall ...

EPFL2021

Development of microdevices for the in-plane thermoelectric characterization of deposited films

Stefano Mischler

Measuring the thermoelectric transport properties of a material is a prerequisite to determining its usefulness for application in waste heat recovery or cooling and the basis for devising improvement strategies. While well-established characterization met ...

ELSEVIER2021