Publications associées à Microdrop generation and deposition of ionic liquids

3D Printing of Customizable Transient Bioelectronics and Sensors

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Arnaud Bertsch, Jürgen Brugger, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Horst Pick, Andreas Stephan Lesch, Emanuela Maiorano

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Luis Guillermo Villanueva Torrijo, Danick Briand, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Jürgen Brugger, Christophe Moser, Damien Claude-Marie Loterie, Max Kollep, Paul Delrot, Georgia Konstantinou, Lorenz Hagelüken, Jorge Andres Madrid Wolff, Antoine Vincent Boniface

Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ...

2022

Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices

Manuel Bianco

Inkjet printing technology was employed for the application of protective layer coatings in SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on standard and surface nitrided K41 ferritic stainless-steel substrates. Inkjet-prin ...

ELSEVIER SCI LTD2022

Peeling in electroadhesion soft grippers

Herbert Shea, Vito Cacucciolo

Electroadhesion endows robots with super-human abilities: mechanical geckoes that climb vertical walls and soft grippers that grasp the most delicate objects. Based on electrostatics, the adhesion forces are turned on and off by an electrical signal, promi ...

ELSEVIER2022

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Samuel Rosset, Herbert Shea, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Apparatus and method for locating cells generating an electrical anomaly in a subject's body part

Farhad Rachidi-Haeri

The present invention concerns a data processing apparatus for locating source cells (25) responsible for an electrical anomaly in a subject's body part (8). The apparatus comprises means for: obtaining one or more electrical signals (19) resulting from el ...

2021

Deep-UV approaches and printing of indium zinc oxide thin-film transistors targeting their processing on thermosensitive substrates

Alessio Mancinelli

Novel metal-oxides (MOx) semiconductors for thin-film transistors (TFTs) are being developed as they can offer superior electric performances over organic-based counterparts. MOx TFTs processed on foil could be exploited in smart labels as RFID and NFC tag ...

EPFL2021

Electrical Signal Modeling in Cochlear Implants. Study of Temperature and Humidity Effects

Maria-Alexandra Paun

The present paper discusses the climatic effects of humidity and temperature on cochlear implant functioning and the quality of the electrical sound signal. MATLAB Simulink simulations were prepared, offering insights into signal behavior under such climat ...

MDPI2021

3D Printed Micro-Scaffolds Loaded by Inkjet Printing With in-Precise Amount of Drug

Jürgen Brugger, Christopher Chi Wai Tse, Jongmoon Jang, Fengyi Zheng

We propose a novel combination of two-photon polymerization (2PP) three-dimensional (3D) micro-manufacturing with drop-on-demand inkjet printing (DOD IJP) to fabricate 3D microporous scaffolds embedded with minute quantities of releasable drug. We designed ...

IEEE2020

All-Printed Electrocorticography Array for In Vivo Neural Recordings

Fabian Michael Lütolf, Diego Ghezzi, Eleonora Borda, Laura Ferlauto, Nenad Marjanovic

Bioelectronic and neuroprosthetic interfaces rely on implanted microelectrode arrays (MEAs) to interact with the human body. Printing techniques, such as inkjet and screen printing, are attractive methods for the manufacturing of MEAs because they allow fl ...

2020

Inkjet Printing of Complex Soft Machines with Densely Integrated Electrostatic Actuators

Samuel Rosset, Herbert Shea, Samuel Schlatter, Giulio Grasso

A multimaterial inkjet printing method for integrated soft multifunctional machines is reported, combining dense arrays of electrostatic actuators, multilayer electrical routing, and complex networks of microfluidic channels in one printing process. Most a ...

2020

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto, Massimo Rosa

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020