Recherche

Afficher tous les résultats pour

Accueil

Publication

Composition and structure of Fe(III)-precipitates formed by Fe(II) oxidation in water at near-neutral pH: Interdependent effects of phosphate, silicate and Ca

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (34)

Page 2 sur 2

Early Precipitation Stages of Sigma Phase in Alloy 28 Studied with Scanning Electron Microscopy and Atom Probe Tomography

Claes Olof Anders Olsson

This study deals with early stages of sigma phase growth in a high end austenitic stainless steel - Alloy 28 (EN 1.4563/UNS N08028). Its precipitation kinetics was followed by a series of heat treatments at 800 degrees C for holding times up to 30 000 s. T ...

2021

Microstructure and precipitates in annealed Co38Ni33Al29 ferromagnetic shape memory alloy

Barbora Bártová

Transmission electron microscopy was performed to investigate the microstructure and precipitates in the annealed Co38Ni33Al29 ferromagnetic shape memory alloy. Apart from the dendritic secondary phase in the austenite matrix, micron-sized (up to 100 μm) f ...

Elsevier Science Sa2013

Modelling Hydration Kinetics of Cementitous Systems

Aditya Kumar

The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...

EPFL2012

Structure and thermal stability of arc evaporated (Ti0.33Al0.67)(1-x)SixN thin films

(Ti0.33Al0.67)(1-x)SixN (0

2008

Structured nanoscale metallic glass fibres with extreme aspect ratios

Giuseppe Schiavone, Güven Kurtuldu, Inès Richard, Stéphanie Lacour, Grégoire Courtine, Dang Tùng Nguyen, Fabien Sorin, Wei Yan, Yunpeng Qu, Vasiliki Tileli, Nicholas David James, Jordan Squair, Reinis Ignatans

Micro- and nanoscale metallic glasses offer exciting opportunities for both fundamental research and applications in healthcare, micro-engineering, optics and electronics. The scientific and technological challenges associated with the fabrication and util ...

Nature Publishing Group2020

Analysis of nano-sized irradiation-induced defects in Fe-base materials by means of small angle neutron scattering and molecular dynamics simulations

Gang Yu

Thermonuclear fusion of light atoms is considered since decades as an unlimited, safe and reliable source of energy that could eventually replace classical sources based on fossile fuel or nuclear fuel. Fusion reactor technology and materials studies are i ...

EPFL2008

Effect of sulfate on C-S-H at early age

Karen Scrivener, Arnaud Charles Albert Muller, Elise Marie Jeanne Berodier

The effect of increasing sulfate contents on the hydration of white cement was studied with a multi-technique approach. Quantitative X-Ray Diffraction (XRD) revealed that adding more gypsum in the cement resulted in more ettringite formation. Combining iso ...

Pergamon-Elsevier Science Ltd2020

On the relationship between the microstructure and the mechanical properties of an ODS ferritic/martensitic steel

Amuthan Ramar

In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...

EPFL2008

Ruthenium on phosphorous-modified alumina as an effective and stable catalyst for catalytic transfer hydrogenation of furfural

Gaël Peng, Thibault Xavier Florian Fovanna, Oliver Kröcher, Davide Ferri

Supported ruthenium was used in the liquid phase catalytic transfer hydrogenation of furfural. To improve the stability of Ru against leaching, phosphorous was introduced on a Ru/Al2O3 based catalyst upon impregnation with ammonium hypophosphite followed b ...

2020

Cellulose phosphorylation comparison and analysis of phosphorate position on cellulose fibers

David Lyndon Emsley, Jayasubba Reddy Yarava

Chemical modifications of cellulose fibers as pretreatment for cellulose nanofibrils (CNF) production have been investigated to improve the production process and the quality of obtained cellulosic nanomaterial. In this study, phosphorylation of cellulose ...

ELSEVIER SCI LTD2020

Enhanced strength and toughness of bulk ultrafine grained Cu by nacre-inspired lamellar structure

Roland Logé, Jun Wang

An ultrafine grained (UFG) bulk Cu with a novel nacre-inspired lamellar structure containing nano-bridges and aligned nanopores at inter-lamellar interfaces was fabricated by consolidation of a nanocrystal-attached ultrathin Cu flake powder by spark plasma ...

2020

The effect of sodium hydroxide on Al uptake by calcium silicate hydrates (C S H)

Christian Ludwig, Sonya Barzgar

To reduce the CO2 emissions from cement production, Portland cement (PC) is partially replaced by supplementary cementitious materials (SCM). Reactions of SCM with PC during hydration leads to the formation of CSH with more silicon and aluminum than in PC, ...

2020

Selective Catalytic Reduction of NO with NH3 on Cu-SSZ-13: Deciphering the Low and High-temperature Rate-limiting Steps by Transient XAS Experiments

Oliver Kröcher, Adrian Marberger, Davide Ferri, Patrick Simon Steiger, Rob Jeremiah G. Nuguid

Cu-exchanged small-pore SSZ-13 catalysts have found wide use for the selective catalytic reduction (SCR) of nitrogen oxides from automotive exhaust gases. The transient working environment of the Cu-SSZ-13 catalyst during NH3-SCR requires studying the rate ...

Wiley-VCH Verlag2020

Photocatalytic Performance of CuxO/TiO2 Deposited by HiPIMS on Polyester under Visible Light LEDs: Oxidants, Ions Effect, and Reactive Oxygen Species Investigation

Sami Rtimi

In the present study, we propose a new photocatalytic interface prepared by high-power impulse magnetron sputtering (HiPIMS), and investigated for the degradation of Reactive Green 12 (RG12) as target contaminant under visible light light-emitting diodes ( ...

2019