Publications associées à Revealing cation and metal gradients in and underneath passive films of the stainless steel 1.4652 in acidic and alkaline electrolytes with angular resolved dual energy X-ray photo-electron spectroscopy

Theoretical explanation of passivation behavior in OFP-Cu and OF-Cu

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic pola ...

Pergamon-Elsevier Science Ltd2024

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Raffaella Buonsanti, Anna Loiudice, Petru Pasquale Albertini, Ona Segura Lecina, Coline Marie Agathe Boulanger, Philippe Benjamin Green, Mark Adrian Newton, Krishna Kumar, Jari Leemans

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Amer Chemical Soc2024

Competition between Carrier Injection and Structural Distortions in Electron-Doped Perovskite Nickelate Thin Films

Jean-Marc Triscone, Duncan Thomas Lindsay Alexander, Jonathan Spring, Bernat Mundet

The discovery of superconductivity in doped infinite-layer nickelate thin films has brought increased attention to the behavior of the doped perovskite phase. Despite this interest, the majority of existing studies pertain to hole-doped perovskite rare-ear ...

WILEY2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Anna Neus Igual Muñoz, Brigitte Jolles-Haeberli

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Near-junction microfluidic cooling for high power-density GaN-on-Si electronics: A wafer, device, packaging, and system-level investigation

Remco Franciscus Peter van Erp

Electrification of the energy section, from generation to end-use, plays an essential role in reducing global CO2 emission. Innovations in power electronics are required to increase conversion efficiency and power density. Gallium nitride (GaN) transistors ...

EPFL2022

Characterization and Development of Fired Passivating Contacts for Silicon Solar Cells

Mario Joe Lehmann

One of the key elements to improve mainstream crystalline silicon (c-Si) solar cell performance is surface passivation, which is at the center of the ongoing transition from cells with direct silicon-metal contacts to full area passivating contacts. In the ...

EPFL2022

Wafer-scale MoS2 with water-vapor assisted showerhead MOCVD

Andras Kis, Aleksandra Radenovic, Yanfei Zhao, Michal Daniel Macha, Mukeshchand Thakur, Jing Zhang, Mukesh Kumar Tripathi, Hyungoo Ji

Among numerous thin film synthesis methods, metalorganic chemical vapor deposition performed in a showerhead reactor is the most promising one for broad use in scalable and commercially adaptable two-dimensional material synthesis processes. Adapting the m ...

ROYAL SOC CHEMISTRY2022

Modulating the Reactivity of Liquid Ga Nanoparticle Inks by Modifying Their Surface Chemistry

Raffaella Buonsanti, Laia Castilla Amorós, James Richard Pankhurst, Tzu-Chin Chang Chien

Micro- and nanosized particles of liquid metals, particularly Ga-based alloys, are attracting increasing attention for applications in several fields. The surface functionalization of Ga-based nanoparticles (NPs) with organic ligands renders easily process ...

2022

Modeling Current Transients in a Reciprocal Motion Tribocorrosion Experiment

Stefano Mischler, Anna Neus Igual Muñoz, Shoufan Cao

Tribocorrosion of passivating metals is a dynamic phenomenon causing degradation of materials by a combination of mechanical wear and electrochemical dissolution. The mechanical action typically produces a local removal of particles, metal as well as oxide ...

ELECTROCHEMICAL SOC INC2021

van der Waals Epitaxy of Co10–xZn10–yMnx+y Thin Films: Chemical Composition Engineering and Magnetic Properties

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Dirk Grundler, Ping Che, Simon Robert Escobar Steinvall, Andrea Mucchietto, Rajrupa Paul, Mohammad Hamdi

Topologically protected magnetic skyrmions have raised interest for future spintronics applications. One of the main challenges is the synthesis of room temperature skyrmion-hosting materials that are compatible with thin-film technology. We present an app ...

2021

Electrochemical and morphological engineering of 2D materials for nanopore sensing

Martina Lihter

Nanopores are nanometer-sized holes that were initially proposed for DNA sequencing. Several years ago sequencing was made possible with biological nanopores. However, solid-state nanopores have plenty of advantages to offer compared to their biological co ...

EPFL2020

'Green' Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Enrico Bertero

The electrodeposition (ED) of stainless steel (SS) -like FeCrNi alloys for miniaturised devices is appealing for bio-medicine as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, bio-compatibility) at low-cost. Ho ...

EPFL2020

Deep-UV-Enhanced Approach for Low-Temperature Solution Processing of IZO Transistors with High-k AlOx/YAlOx Dielectric

Danick Briand, Alessio Mancinelli, Jaemin Kim

Solution processing is an attractive alternative to standard vacuum fabrication techniques for the large-area manufacturing of metal oxide (MOx)-based electron devices. Here, we report on thin-film transistors (TFTs) based on a solution-processed indium zi ...

AMER CHEMICAL SOC2020

Crystal Phase Engineering in III-V Semiconductor Films: from Epitaxy to Devices

Philipp Staudinger

Crystal phase engineering is an exciting pathway to enhance the properties of conventional semiconductors. Metastable SiGe presents a direct band gap well suited for optical devices whereas wurtzite (WZ) phosphide alloys enable efficient light emission in ...

EPFL2020

InAs-on-Insulator Fin Nanostructures for Integrated Computation and Sensing Functions

Maneesha Rupakula

Field-effect transistors (FETs) have established themselves as a leading platform for electrical detection of chemical and biological species. Their advantages over other optical, mechanical sensing platforms are attributed to being miniaturizable, mechani ...

EPFL2020

Co-designing electronics with microfluidics for more sustainable cooling

Elison de Nazareth Matioli, Reza Soleiman Zadeh Ardebili, Georgios Kampitsis, Remco Franciscus Peter van Erp, Luca Nela

Thermal management is one of the main challenges for the future of electronics1,2,3,4,5. With the ever-increasing rate of data generation and communication, as well as the constant push to reduce the size and costs of industrial converter systems, the powe ...

NATURE RESEARCH2020

Nanoscale imaging of mobile carriers and trapped charges in delta doped silicon p-n junctions

Gabriel Aeppli

Broadband electrostatic force microscopy can be used to non-destructively image n-type and p-type dopant layers in silicon devices with a lateral resolution of 10 nm and a vertical resolution of 0.5 nm. ...

NATURE PUBLISHING GROUP2020

Insights into the interfacial carrier behaviour of copper ferrite ( CuFe2O4) photoanodes for solar water oxidation

Kevin Sivula, Florian Le Formal, Nestor Guijarro Carratala, Liang Yao, Yongpeng Liu, Florent Alexandre Boudoire

Designing efficient yet robust photoanodes for water oxidation stands out as a major bottleneck in the realization of a feasible photoelectrochemical tandem cell for solar water splitting. Spinel copper ferrite (CuFe2O4) has been recently reported as a pot ...

Royal Society of Chemistry2019

Reduction of Fermi level pinning at Cu-BP interfaces by atomic passivation

Pengfei Ou, Xiao Zhou, Cheng Chen

Black phosphorus (BP) is a semiconducting material with a direct finite band gap in its monolayer, attracting intense attention for its application in field-effect transistors. However, strong Fermi level pinning (FLP) has been observed for contacts betwee ...

2019