Publications associées à A Material Approach to Dye-Sensitized Solar Cells : Atomic Layer Deposition and Inverse Opal Host-Guest Architectures

Publications associées (40)

De-doping engineering for efficient and heat-stable perovskite solar cells

In conventional n-i-p perovskite solar cells, unsolved issues persist, particularly concerning notorious performance degradation under prolonged heat exposure at 85°C. By reducing the concentration of 4-tert-butylpyridine (tBP) and lithium bis(trifluoromet ...

2025

Dipolar Carbazole Ammonium for Broadened Electric Field Distribution in High-Performance Perovskite Solar Cells

Felix Thomas Eickemeyer, Likai Zheng, Jaeki Jeong

Perovskite solar cells (PSCs) with ammonium passivation exhibit superior device performance and stability. Beyond typical chemical passivation, ammonium salts control the electronic structure of perovskite surfaces, yet the molecular structure-property rel ...

2025

Photoelectrochemical Degradation and Regeneration of Ca2fe2o5 Photocathodes

Kevin Sivula, Maria Isabel Diez Garcia, Benjamin Goldman

Ca2Fe2O5 is a p-type semiconductor with properties suitable for potential application as a photocathode in photoelectrochemical water splitting. However, it suffers from poor stability under working conditions that is still not completely understood. In th ...

ROYAL SOC CHEMISTRY2025

Effect of imidazole-based additives on the voltage of dye sensitized solar cells with Cu(II/I) redox mediators

Michael Graetzel, Ladislav Kavan

Acetonitrile solutions of Cu(tmby)22+ exhibit aging-dependent changes of UV–Vis spectra, which were attributed to partial reduction to Cu(tmby)2+. This effect is boosted by the addition of imidazole bases, i.e., N-methyl-benzimidazole (NMB) or 5‑chloro-1-e ...

2025

Characterization of Lightweight Polymeric Honeycomb Structures for Use as Backsides in Glass‐Free PV Modules

Christophe Ballif, Antonin Faes, Umang Bhupatrai Desai

In densely populated or mountainous countries where installation of large‐scale solar plants is challenging, photovoltaic (PV) modules in building applications offer a solution by transforming passive surfaces into energy‐generating systems. The need for f ...

Wiley2025

Carbon-nanomaterial-enabled terahertz technology

Benhui Dai

Terahertz (THz) technology bridges the gap between electronics and photonics, unlocking transformative opportunities in medical diagnostics, molecular identification and next-generation wireless networks. Usually, THz devices have been made from convention ...

2025

Detect, Decouple, Optimise: Insights into Solar Photovoltaics Faults and Performance Trends

Christophe Ballif, Hugo James André Quest

With the photovoltaics (PV) market reaching the terawatt scale, assessing the performance of PV systems accurately has become essential. Traditional approaches to fault detection and diagnosis (FDD) and performance loss rate (PLR) evaluation often operate ...

Wiley2025

Data set for Gate-Tunable Hole Transport in In-Plane Ge Nanowires by V-Groove Confined Selective Epitaxy

Santhanu Panikar Ramanandan

This folder contains all the raw and processed data used for the manuscript titled: Gate-Tunable Hole Transport in In-Plane Ge Nanowires by V-Groove Confined Selective Epitaxy ...

Zenodo2025

Surface chemistry of supported Ru nanoparticles investigated during CO2 hydrogenation by NAP-XPS

Guillaume Bérenger Rod, Andreas Züttel, Mounir Driss Mensi, Yasemen Kuddusi

In situ investigation of the surface composition of catalyst particles improves the understanding of the active species in heterogeneous catalysis. This study analyzed the surface chemistry of ruthenium nanoparticles supported on alumina during CO2 methana ...

2025

An aperiodic chiral tiling by topological molecular self-assembly

Christian Wäckerlin

Studying the self-assembly of chiral molecules in two dimensions offers insights into the fundamentals of crystallization. Using scanning tunneling microscopy, we examine an uncommon aggregation of polyaromatic chiral molecules on a silver surface. Dense p ...

Nature Research2025

Wafer-Scale Demonstration of a Highly Sensitive Strain Sensor Based on Polycrystalline VO2

Mihai Adrian Ionescu, Anna Varini, Cyrille Masserey, Zahra Saadat Somaehsofla

Vanadium dioxide (VO2) exhibits structural phase transition that can be triggered by thermal, electrical, and mechanical stimuli, making it a highly interesting material for MEMS/NEMS based sensors and actuators thanks to responsivity and exceptional sensi ...

Institute of Electrical and Electronics Engineers Inc.2025

Computational Studies on the Stability of Organic-Inorganic Hybrid Halide Lead Perovskites

Mathias Dankl

Perovskite-based solar cells are currently the most rapidly advancing photovoltaic technology but concerns about their long-term stability are still impeding full-scale commercialization. This thesis provides computational insights into some of the stabili ...

EPFL2024

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Mounir Driss Mensi, Masaud Hassan S Almalki, Anwar Qasem M Alanazi

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Elsevier2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications

Fabiana Lisco

Lightweight modules are essential for next-generation vehicle-integrated photovoltaic (VIPV) applications, such as solar-powered cars, allowing integration of solar cells beyond the roof, and on the hood, boot and body panels, and thereby extending the dri ...

Elsevier2024

From PV to EV: Mapping the Potential for Electric Vehicle Charging with Solar Energy in Europe

Christophe Ballif, Nicolas Würsch, Alejandro Pena Bello, Noémie Alice Yvonne Ségolène Jeannin, Jérémy Dumoulin

The electrification of the transport sector is a key element in decarbonizing our societies. However, energy systems will have to cope with additional electricity demand due to the charging needs of electric vehicles (EVs) together with the integration of ...

2024

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

High-throughput parallel testing of ten photoelectrochemical cells for water splitting: case study on the effects of temperature in hematite photoanodes

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora, Roberto Valenza

High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte inter ...

Royal Soc Chemistry2024

Structural divergence of molecular hole selective materials for viable p-i-n perovskite photovoltaics: a comprehensive review

Mohammad Khaja Nazeeruddin, Peng Gao

Perovskite solar cells (PSCs) have garnered significant attention within the photovoltaic research community due to their remarkable progress in just one decade. Among the device configurations, the p-i-n structured PSC offers several advantages, including ...

Royal Society of Chemistry2024

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Anaël Morgane Jaffrès, Christophe Ballif, Quentin Thomas Jeangros, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman, Daniel Anthony Jacobs, Austin George Kuba

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Royal Soc Chemistry2024